HIROYASU CB-1011

Contents

HIROYASU CB-1011 CB Mobile Radio User Manual

Model: CB-1011

1. Introduction

Thank you for choosing the HIROYASU CB-1011 CB Mobile Radio. This compact and versatile 11-meter CB radio is designed for reliable communication in various environments, particularly suitable for vehicle use. It supports both FM and AM modes, offers selectable power output, and complies with European CB standards. Please read this manual thoroughly to understand the features and ensure proper operation.

For a detailed PDF version of this manual, please refer to the official user manual document.

2. Product Overview

2.1. Key Features

  • FM/AM Modes
  • Frequency Range: 26.565-27.99125MHz
  • Output Power: 8W/4W Selectable
  • ASQ/SQ Level Control
  • RF Gain Control
  • Palm Size, Lightweight Design
  • Supports various European CB standards (EU, PL, DE, CE, UK, IN, US, IT)

2.2. Package Contents

Upon unboxing, please ensure all items are present:

  • HIROYASU CB-1011 CB Mobile Radio Unit
  • Microphone with coiled cord
  • Power Cable with 12V Car Cigarette Lighter plug
  • Mounting Bracket
  • Screws for bracket
  • Pads for bracket
  • Spare Fuses (10A 250V)
  • User's Manual
HIROYASU CB-1011 CB Walkie Talkie in a car interior, showing FM/AM modes, frequency, power select, ASQ/SQ level control, RF gain control, palm size, lightweight.

Image: HIROYASU CB-1011 CB Walkie Talkie in a car interior, highlighting its features.

HIROYASU CB-1011 CB Walkie Talkie in a hand, illustrating its palm size and lightweight design, with dimensions 109*104*25mm.

Image: The compact size of the HIROYASU CB-1011 CB Mobile Radio, fitting comfortably in a palm.

Video: An unboxing and feature demonstration of the HIROYASU CB-1011 CB Mobile Radio, showing its components and basic operations.

3. Setup Guide

3.1. Connecting Power

The CB-1011 is designed to be powered by a 12V car cigarette lighter. Connect the provided power cable to the radio and then to your vehicle's cigarette lighter socket.

HIROYASU CB-1011 CB Walkie Talkie powered by a 12V car cigarette lighter.

Image: The CB-1011 radio connected to a 12V car cigarette lighter for power.

3.2. Antenna Connection

Connect your external CB antenna to the antenna jack on the rear panel of the radio. Ensure a secure connection for optimal performance.

3.3. Microphone Connection

Plug the microphone's coiled cord into the dedicated port on the front panel of the radio.

3.4. Mounting

Use the provided mounting bracket and screws to securely install the radio in your desired location within the vehicle. Ensure it is placed in a position that does not obstruct driving or safety features.

3.5. Selecting CB Band for Your Country

The CB-1011 supports various CB frequency bands tailored for different countries. Refer to the 'Country CB Bands Table' in the specifications section to identify the correct band for your region.

  1. Press and Hold the A/F key on the front panel while powering on the radio. The CB band country code will be displayed on the LCD.
  2. Use the UP or DN buttons on the microphone speaker to choose your country's CB Band code (e.g., EU, PL, DE, UK, IN, US, IT).
  3. Rotate the VOL switch anti-clockwise to power off the radio to confirm your selection.
  4. Power on the radio again, and it will operate in your selected CB frequency band.
HIROYASU CB-1011 CB Walkie Talkie with microphone, highlighting 26.565-27.99125MHz frequency, support for DE/EU/CE/PL/UK/IT/IN/US CB bands, and 40 channels.

Image: The CB-1011 radio displaying frequency and supported CB bands.

4. Operating Instructions

4.1. Power On/Off and Volume Control

  1. Power On: Turn the VOL switch clockwise to power on the radio. The LCD will display a channel number.
  2. Power Off: Turn the VOL control key anti-clockwise to switch the radio OFF.
  3. Volume Control: When the radio is on, turning the VOL control key clockwise increases volume; anti-clockwise reduces it.

4.2. Channel Control

  1. Press [UP] or [DN] on the microphone to select your desired channel.
  2. Press and hold [UP] or [DN] to quickly scroll through channels.

4.3. Squelch Control (Manual SQ and ASQ)

Squelch reduces background noise and unwanted signals when no one is transmitting. It sets a threshold for signal strength.

HIROYASU CB-1011 CB Walkie Talkie showing manual/automatic squelch level control with a visual representation of signal levels.

Image: The CB-1011 radio demonstrating squelch level control.

4.3.1. Manual Squelch (SQ)

  1. Press the SQ key. "XX" will be displayed on the LCD, indicating the current level. The radio will return to channel display if no operation is performed within 5 seconds.
  2. Use the UP or DN buttons on the microphone to change the SQ level (0.0 to 9.9).
  3. Press and hold [UP]/[DN] for faster adjustment.
  4. Press SQ again or wait 3 seconds to store the squelch level and exit.

4.3.2. Automatic Squelch (ASQ)

ASQ automatically blocks noisy signals. There are 9 levels (A.1-A.9) for adjustment.

  1. Press and hold SQ until "AQ" is displayed on the LCD. Then press SQ again to set the ASQ level. "A.X" will be displayed, where X is the level.
  2. Use the UP or DN buttons on the microphone to select your desired ASQ level.
  3. Press and hold [UP]/[DN] for faster adjustment.
  4. Press SQ again or wait 3 seconds to store the ASQ level and exit.

4.4. FM/AM Mode Switch

Press the A/F key on the front panel to switch between AM and FM modes. Your selected mode will be displayed on the LCD.

4.5. RF Gain Control (RFG)

RF Gain acts as a sensitivity filter to reduce noise from the atmosphere and other channels without reducing reception power.

  1. Press the RFG key on the front panel to enable RF gain control. "RFG" will be displayed on the LCD, and the RF gain level will flash.
  2. Use the UP or DN buttons on the microphone to change the RF gain level.
  3. Press RFG again to save the setting and exit the menu.

4.6. Emergency Channels (EMG)

The radio provides quick access to emergency channels.

  1. Press the EMG key to select CH9 (emergency communication). The channel number will flash.
  2. Press EMG again to select CH19 (trucker communication). The channel number will flash.
  3. Press EMG a third time to return to the last working channel.

4.7. Channel Scan (SC)

The radio features a channel scanning function.

  1. Press and hold the A/F key on the front panel for over 3 seconds to enable channel scan. "SC" will be displayed on the LCD.
  2. Use the UP or DN buttons on the microphone to select the channel scanning direction.
  3. Press and hold A/F for over 3 seconds again, or press the PTT key on the microphone to exit scan function.

4.8. Keypad Lock

To prevent accidental operation, the keypad can be locked.

  1. Press and hold the EMG key for over 3 seconds to enable keypad lock. "LC" will be displayed on the LCD.
  2. Press and hold the EMG key again for over 3 seconds to exit keypad lock. "OF" will be displayed.

4.9. High/Low Power Select

You can select between 4W (PL) and 8W (PH) output power.

  1. Press and hold the EMG key and RFG key simultaneously while powering on the radio.
  2. Use the UP or DN buttons to choose your desired power level (PL for 4W, PH for 8W).
  3. Rotate the VOL switch anti-clockwise to power off the radio to confirm your selection.
  4. Power on the radio again, and it will operate at your selected output power level.
HIROYASU CB-1011 CB Walkie Talkie demonstrating PH (8W) / PL (4W) high/low power selection by pressing EMG+RFG keys.

Image: Demonstrating high (PH) and low (PL) power selection on the CB-1011 radio.

5. Maintenance

5.1. General Care

  • Keep the radio dry. If it gets wet, wipe it dry immediately.
  • Use a soft, damp cloth to clean the radio's surfaces. Avoid harsh chemicals or solvents.
  • Do not expose the radio to extreme temperatures.
  • Avoid dropping or subjecting the radio to strong impacts.

5.2. Default Factory Resetting

To restore all settings to their factory defaults:

  1. Press and hold the SQ key while powering on the radio. "---" will be displayed on the LCD.
  2. All channel and function settings will revert to factory defaults after this operation.

6. Troubleshooting

6.1. FCC Declaration of Conformity

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

6.2. Common Issues

  • No Power: Check the power cable connection to the radio and the vehicle's cigarette lighter socket. Ensure the vehicle's ignition is on. Check the fuse in the cigarette lighter plug.
  • No Reception/Transmission: Verify the antenna is properly connected and tuned. Check the selected CB band and channel. Adjust squelch and RF gain levels.
  • Poor Audio Quality: Ensure the microphone is securely connected. Check squelch and RF gain settings.

7. Specifications

CategorySpecification
General
Frequency Range26.565-27.99125MHz
Frequency ControlPLL Synthesizer
Frequency Tolerance±5.0ppm
Operating Temperature Range-20℃~+50℃
Input Voltage13.8V 5%
Dimensions109 x 104 x 25mm
Weight421g
Transmitter
Power Output8 Watts FM/AM
Modulation ModeAM/FM
Current Drain2A MAX
Transmission InterferenceInferior to 4nW (-54dBm)
Frequency Response300-3000Hz
Modulated Signal DistortionInferior to 5%
Output Impedance50 ohms
Receiver
SensitivityLess than 1uV for 10dB (S+N)/N
Image Rejection70dB
Adjacent Channel Rejection60dB
IF Frequencies1st 10.695MHz, 2nd 455KHz
Automatic Gain Control (AGC)Less than 10dB change in audio output for inputs from 10 to 50000uV
SquelchLess than 1uV
Audio Output Power1 Watts
Frequency Response300-3000Hz

7.1. Country CB Bands Table

Band CodeFrequency RangeFM/Chs (Power)AM/Chs (Power)For CountriesEMG CH19 ModeEMG CH9 Mode
EU26.965-27.40540CH (4W)40CH (4W)EE,ES,FI,FR,HU,IE,IT,LV,NL,NO,PT,RO,SEAMAM
PL26.960-27.40040CH (4W)40CH (4W)PLAMAM
DE26.565-27.40580CH (4W)40CH (4W)CZ,DE,SKFMAM
CE26.965-27.40540CH (4W)N/ACEPT FreqFMFM
UK27.60125-27.9912540CH (4W)N/AUKFMFM
IN26.965-27.27527CH (4W)27CH (4W)INAMAM
US26.965-27.405N/A40CH (4W)USA,BR,CA,MXAMAM
IT26.855-27.26536CH (4W)36CH (4W)ItalyAMAM

8. User Tips

  • Microphone Audio Improvement: Some users have found that stuffing some paralon (foam) into the microphone can improve audio quality, as others might complain the sound is like it's coming from a barrel.
  • Antenna Tuning is Key: The radio's range and performance depend significantly on the quality and tuning of your antenna. Invest in a good antenna and ensure it's properly tuned for optimal results.
  • Compact Size for Tight Spaces: The small and lightweight design of the CB-1011 makes it ideal for installation in vehicles with limited space.
  • Easy Operation: The radio is generally considered user-friendly and easy to operate, even for beginners.
  • Versatile for Travel: The ability to select different CB bands makes it suitable for use in various countries (e.g., EU, PL, DE, CE, UK, IN, US, IT). For US use, selecting the EU band provides access to all US AM and FM channels.

9. Frequently Asked Questions (FAQ)

Q: Does this radio come with an antenna?

A: No, the radio typically does not include an antenna. You will need to purchase a suitable CB antenna separately.

Q: What kind of antenna is needed for this CB radio?

A: A standard CB antenna designed for 27MHz operation is required. The type and quality of the antenna will significantly impact performance and range.

Q: What is the range of this radio?

A: The range of a CB radio depends heavily on factors such as terrain, antenna quality, and environmental conditions. Users have reported decent range, with some broadcasting up to 27 miles with a good antenna.

Q: How do I set the frequency to a specific value like 27100?

A: The radio operates on predefined channels within the selected CB band. You select channels (e.g., CH01-CH40/CH80) rather than directly inputting frequencies. The frequency table in the specifications section shows the corresponding frequency for each channel.

Q: Will this radio work in Australia?

A: The radio supports various international CB bands. Please check the 'Country CB Bands Table' in the specifications section to see if an Australian band is explicitly listed or if one of the supported bands (e.g., EU, US) aligns with Australian CB regulations and frequencies.

Q: Can this radio work with Baofeng radios?

A: No, this is a CB (Citizens Band) radio operating on 27MHz. Baofeng radios typically operate on VHF/UHF frequencies (e.g., 136-174MHz, 400-520MHz) and are not directly compatible with CB radios.

10. Warranty and Support

For any technical support or inquiries, please contact the manufacturer:

  • Manufacturer: Shenzhen Esma Electronics Co., Ltd.
  • Address: #2710, F27, Block B, Zhongshen Garden, Caitian Rd, Futian District, Shenzhen, China 518000
  • E-mail: HiroyasuService@outlook.com

Please retain your proof of purchase for any warranty claims. Specific warranty terms and conditions may vary and are typically provided at the point of purchase or in the full user manual PDF.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.