SUPERFIRE TN02

Contents

SUPERFIRE TN02 High Power LED Flashlight User Manual

Model: TN02

1. Safety Warnings

  • Do not shine directly into the eyes; the powerful LED light will damage the eyes immediately.
  • If the battery is not used for a long time, charge and discharge it every 3 months to keep the battery in good condition.
  • It is normal for the flashlight to heat up during prolonged use.
  • When the indicator light shows low power, charge the battery as soon as possible.
  • Keep the battery away from water, moisture, and drops.
  • To avoid damage to the surface of the flashlight, do not expose it to sunlight, water, chemicals, corrosive gases, or any other oxidizing environment frequently.
  • Before first use, please remove the transparent film from the battery surface.

2. Package Contents

The SUPERFIRE TN02 package includes:

  • 1 x SUPERFIRE TN02 Flashlight
  • 1 x Type-C Charging Cable
  • 1 x 18650/3400mAh Battery (pre-installed, remove protective film before use)
  • 1 x User Manual (this document)
SUPERFIRE TN02 package contents including flashlight, Type-C cable, and battery.
Figure 1: Package Contents (Flashlight, Type-C Cable, Battery)

3. Setup and Charging

3.1 Initial Setup

  1. Battery Installation: Before first use, open the tail cap and remove the transparent protective film from the battery. Insert the battery with the positive (+) end facing towards the flashlight head.
  2. First Charge: If the product does not work properly after receiving it, charge it for at least half an hour using the provided Type-C charging cable and a 5V/1A or 5V/2A adapter.

3.2 Charging Instructions

  • The TN02 is equipped with a USB Type-C charging port for quick and convenient charging.
  • Connect the Type-C cable to the flashlight's charging port and the other end to a USB power source.
  • During charging, the indicator light will be red.
  • When fully charged, the indicator light will turn blue.
  • The flashlight does not support use while charging.
SUPERFIRE TN02 flashlight connected to a USB Type-C charging cable.
Figure 2: USB Type-C Charging Port

4. Operating Instructions

4.1 Basic Operation

  1. Turn On/Off: Press the front button to turn on the light source. The flashlight will start in Low light mode. Press and hold the button for approximately 2 seconds to turn off the light source.
  2. Change Modes: While the flashlight is on, continue to press the button to cycle through the modes: Low light → Medium light → Strong light → Moonlight → Strobe → Off. The flashlight has a mode memory function, meaning it will turn on in the last used mode (excluding Turbo and Strobe).
  3. Turbo Mode: Double-click the button from any mode to activate Turbo mode (ultra-bright). To return to the previous mode, press the button once.
Video 1: Demonstrates the 5 lighting modes (Low, Medium, Strong, Moonlight, Strobe) and activation of Ultra-Bright (Turbo) mode.
SUPERFIRE TN02 flashlight used in various outdoor scenarios: Patrol, Camping, Exploration, Hiking, demonstrating five brightness levels.
Figure 3: Five Brightness Levels for Various Situations

4.2 Special Features

  • Magnetic Tail: The TN02 features a magnetic tail cap, allowing it to be securely attached to metal surfaces for hands-free operation.
SUPERFIRE TN02 flashlight magnetically attached to the underside of a car hood, illuminating the engine bay.
Figure 4: Magnetic Tail Functionality

5. Maintenance

  • Cleaning: Wipe the flashlight body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Battery Care: If the battery is not used for a long time, charge and discharge it every 3 months to maintain its health. Store the battery in a cool, dry place.
  • Storage: Store the flashlight in a dry environment, away from direct sunlight, water, chemicals, corrosive gases, or other oxidizing environments.
  • Water Resistance: The flashlight has an IP44 waterproof rating, making it resistant to splashes and dust. However, avoid prolonged submersion.
SUPERFIRE TN02 flashlight partially submerged in water, demonstrating its IP44 waterproof rating.
Figure 5: IP44 Water Resistance

6. Troubleshooting

  • Flashlight not turning on:
    1. Ensure the battery is correctly inserted with the positive (+) end towards the head.
    2. Check if the transparent protective film has been removed from the battery.
    3. Charge the battery fully. The indicator light should turn blue when charging is complete.
  • Light output is dim or inconsistent:
    1. Charge the battery. Low power can cause dimming.
    2. Ensure the battery contacts are clean and free from debris.
  • Flashlight heats up during use: This is normal, especially during prolonged use or in higher brightness modes. If it becomes excessively hot, reduce the brightness mode or turn it off to cool down.

7. Specifications

SUPERFIRE TN02 Product Parameters
FeatureSpecification
ModelTN02
Power20W
Brightness (Lumen)1800LM
Lighting Distance200-500 m (265M specified in image)
Battery Type18650 (3350mAh / 3400mAh)
Charging MethodType-C Rechargeable
RuntimeApprox. 5.5 hours (High mode), up to 8 days (Moonlight mode)
Dimensions121.5mm x 26mm x 24.5mm (4.78" x 1.02" x 0.96")
Weight70g (2.47 oz)
Body MaterialAluminum Alloy
Waterproof RatingIP44
Switch ModeHigh/Middle/Low (Low-Medium-Strong-Moonlight-Strobe-Off/Turbo)
Focal LengthNon-adjustable
Light SourceLED bulbs (SST20)
CertificationCCC, CE, CQC, EMC, FCC

Note: The above data are provided by the company lab for reference only. Battery capacity may vary slightly between old and new versions (3350mAh/3400mAh).

8. User Tips

  • Hands-Free Use: Utilize the magnetic tail feature to attach the flashlight to metal surfaces when working on tasks like car repairs or in workshops, freeing up your hands.
  • Outdoor Versatility: The multiple lighting modes and durable, waterproof design make this flashlight suitable for various outdoor activities such as camping, hiking, climbing, fishing, and night walks.
  • Emergency Preparedness: Keep the flashlight charged and accessible for emergency situations, thanks to its robust build and long-lasting battery.

9. Warranty and Support

For detailed warranty information and customer support, please refer to the official user manual PDF:

View User Manual (PDF)

For additional service information, including fast delivery guarantees and security & privacy policies, please visit the official product page or contact customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.