JMQWE 4K 2160P WiFi DVR Video Recorder Dash Camera

Contents

JMQWE 4K 2160P WiFi DVR Video Recorder Dash Camera User Manual

Model: 4K 2160P WiFi DVR Video Recorder Dash Camera

Brand: JMQWE

1. Product Overview

The JMQWE 4K 2160P WiFi DVR Video Recorder Dash Camera is a hidden-type dash camera designed to capture high-resolution video footage of your journeys. Featuring UHD Night Vision, G-Sensor for collision detection, loop recording, and WiFi connectivity for app control, it provides comprehensive surveillance for your vehicle. This manual will guide you through the installation, operation, and maintenance of your new dash camera.

JMQWE 4K 2160P WiFi DVR Dash Camera with a smartphone displaying the companion app.
Figure 1: JMQWE 4K 2160P WiFi DVR Dash Camera with app connectivity.
Side view of the JMQWE 4K 2160P WiFi DVR Dash Camera, highlighting its compact and hidden design.
Figure 2: Compact design of the dash camera.

2. Specifications

AttributeValue
Brand NameJMQWE
Item TypeCar DVR
Assembly ModeHidden Type
Camera Resolution3840x2160 (4K)
Pixels1800Mega
Number Of Lenses2
View Angle170°
Video CodeH.264
Video FormatAVI, MOV, MP4
Frames Per Second30
Max External Memory256G
Memory Card Required Reading SpeedClass 10
Built-in ScreenYes
DisplayOLED
APP CompatibilityIOS, Android OS
Special FeaturesG-Sensor, Motion Detection, SD/MMC Card, Anti Surge Voltage Impact, Anti Vibration, Real Time Surveillance, Automatic White Balance, Wide Dynamic Range, WiFi Function, Parking Monitor, Loop-Cycle Recording Feature, NightShot Function, Rear Camera
Power SourceCorded Electric
Cable Length3.5m
Weight0.35kg-0.65kg
Working Temperature-50°C to 80°C
CertificationCE, Dot, FCC, RoHS

3. Package Contents

Please check the package contents upon unboxing. The standard package includes:

  • JMQWE 4K 2160P WiFi DVR Dash Camera (Front Camera)
  • Standard ACC Power Cable (3.5m)
  • Rear Camera (if selected model includes it)
  • User Manual (this document, also available as a PDF)
JMQWE 4K 2160P WiFi DVR Dash Camera and its power cable.
Figure 3: Dash Camera and Power Cable.

4. Setup and Installation

4.1. App Installation and Connection

The dash camera can be controlled via a smartphone app named "Viidure".

  1. Download "Viidure" App:
    • iPhone: Search "Viidure" on the App Store.
    • Android Phone: Search "Viidure" on Google Play.
  2. Connect Mobile Phone with Dash Camera by WiFi:
    • On your mobile phone, open the "Viidure" app.
    • Go to your mobile phone's WiFi settings and connect to the hotspot named "CARDV...".
    • The default WiFi password is 12345678.
    • Return to the "Viidure" app after connecting.

4.2. Physical Installation

Please read carefully before installation. Ensure the car is turned off before proceeding.

  1. Turn off the car engine.
  2. Insert TF-Card: Properly insert a high-speed TF-Card (Class 10 or above, max 256GB) into the Card Slot on the Car DVR.
  3. Positioning: We suggest installing the dash camera near the rearview mirror or in the center vertical for optimal recording.
  4. Clean Surface: Wipe the chosen installation position with a clean cloth to ensure no dirt remains.
  5. Attach: Find the matched 3M double-sided tape, tear off the tape, and paste the dash camera to the selected installation position.
JMQWE 4K 2160P WiFi DVR Dash Camera installed on a car windshield, showing its discreet placement.
Figure 4: Dash Camera installed in a vehicle.

4.3. Rainware Installation (Optional)

For models supporting rainware functionality:

  1. Remove the original shell.
  2. Unplug the rain sensor and plug in the DVR rain sensor cable.
  3. Complete the installation.

4.4. Power Connection from Fuse Box

This method provides a clean, hidden power installation.

  1. Locate your car's fuse box.
  2. Identify the ACC power, B+ (constant 12V), and GND (ground) connections.
  3. Connect the yellow wire of the power cable to the car battery +12V (B+).
  4. Connect the red wire of the power cable to the car key switch ACC +12V.
  5. Connect the black wire of the power cable to a ground wire (GND), usually a metal screw on the car chassis.

Notes on Power Connections:

  • B+ (Battery): Refers to power not controlled by the car key switch (e.g., interior light, emergency flasher). Provides constant 12V.
  • ACC (Accessory): Refers to power controlled by the car key switch. Power is supplied when the key is inserted and turned, and cut when the key is pulled out (e.g., car cigarette lighter, FM radio).
  • GND (Ground): Negative pole, usually connected to a metal screw.

5. Operation

5.1. DVR Function Introduction

The dash camera features several buttons and indicators:

  • Reset hole: Use a thimble to restart the device if it crashes.
  • LED Indicator (Red/Blue Light):
    • Red Light: Blinking when WiFi is connected; solid when WiFi is not connected.
    • Blue Light: Flashes when recording; solid when recording is stopped.
  • Camera button:
    • In recording mode, short press to pause recording.
    • Long press for 3 seconds to power off.
    • When operating menu, short press to confirm selection.
    • When WiFi connection is built, short press to cancel the connection.
  • Photo button:
    • In recording mode, short press to take photos.
    • Long press for 5 seconds to restore factory settings.
  • Recording/MIC: Microphone for audio recording.
  • TF card jack: Slot for the Micro SD/TF card.
  • Power line interface: For connecting the power cable.
  • Rear camera interface: For connecting the optional rear camera.

5.2. Automatic Recording

The Car DVR is designed for automatic operation. It will power on and start recording automatically when the car starts, indicated by the solid blue light. When the car engine is turned off, the DVR will automatically save the records and power off. Recorded images are saved as clips on the memory card. When the memory card is full, new clips will automatically overwrite older ones (loop recording).

The default recording time for clips is 1 minute.

5.3. G-Sensor (Collision Detection)

The built-in G-Sensor automatically detects collisions and saves relevant video clips to an "event folder". This protects essential witness footage for accidents and insurance claims from being overwritten.

Diagram illustrating the G-Sensor feature, showing a dash camera detecting a collision between two cars and saving the event.
Figure 5: G-Sensor collision detection.

5.4. Night Vision

The dash camera features UHD Night Vision to ensure clear recordings even in low-light conditions.

Video 1: Day and Night Driving Footage from Dash Camera.

6. Maintenance

6.1. TF Card Formatting

It is recommended to format the TF card once every other month. Always back up any necessary data before formatting. Periodically formatting the DVR memory card helps prevent data loss and ensures normal operation of the DVR.

To format the memory card:

  1. Open the "Viidure" app.
  2. Connect to the recorder's WiFi.
  3. Enter the recorder settings within the app.
  4. Select "Format memory card".

7. Troubleshooting

  • Q: Why can't I turn on the DVR?
    A: Ensure the power cable is properly connected and the car is running.
  • Q: How to set the date and time of the DVR?
    A: Connect your phone to the DVR via WiFi, and the date and time will automatically update from your phone.
  • Q: How to understand if the DVR is recording?
    1. If your phone's WiFi connection is off, the blue LED light will flash when recording and be solid when not recording.
    2. If your phone is connected via Wi-Fi, both the red and blue LED lights will flash when recording.
  • Q: The APP cannot connect to the DVR?
    1. Check if the TF card is faulty or if the recorder indicator is blinking. If the TF card is pulled out, boot to test for a WiFi hotspot. If a hotspot is present, replace the TF card. If WiFi still cannot be connected, use a thimble to restart the system via the reset hole.
    2. Try turning off Bluetooth and mobile data on your phone, then attempt to connect again.
  • Q: Recorder cannot record?
    A: Ensure the TF card is properly inserted and formatted. Verify that the TF card is a high-speed Class 10 brand original card.
  • Q: Forgot WiFi password or can't find WiFi?
    A: Press and hold the photo button for 5-10 seconds to restore factory settings. The factory default WiFi hotspot is "CARDV..." and the password is 12345678.
  • Q: The photo button doesn't work?
    A: Check if the key bar cable is loose or damaged.
  • Q: The recorder did not record or recorded a noise?
    1. If there is no sound in the recording, check if the key cable is loose.
    2. If there is recording noise, it may be due to the WiFi antenna. Check the DVR WiFi antenna and try moving it to a different position.
  • Q: The car starts the DVR, but it automatically shuts down after one minute?
    A: Check if the red ACC line is properly powered on.
  • Q: The mobile phone system compatibility problem may cause the APP not to be downloaded or enabled?
    A: Refer to alternative apps like "Timacam" or "Roadcam" for download and use.

8. Warranty and Support

This product comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For further assistance, please refer to the detailed User Manual (PDF) or contact customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.