JGINYUE B650I Night Devil

Contents

JGINYUE B650I Night Devil Motherboard User Manual

Model: B650I Night Devil

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your JGINYUE B650I Night Devil Mini-ITX motherboard. Designed for AMD AM5 Ryzen 7000, 8000, and 9000 series processors, this motherboard offers robust performance for gaming, audio/video production, and general computing tasks. Please read this guide thoroughly before proceeding with installation.

JGINYUE B650I Night Devil motherboard with key specifications

Image 1: JGINYUE B650I Night Devil Motherboard Overview

2. Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact your retailer.

  • Motherboard × 1
  • Quick User Guide × 1
  • SATA Data Cable × 1
  • I/O Rear Panel × 1

Note: Specifications of the above accessories are for reference only; the actual items shall prevail. Our company reserves the right to make modifications without prior notice.

3. Product Specifications

The JGINYUE B650I Night Devil motherboard features a compact Mini-ITX form factor and supports the latest AMD Ryzen processors.

Detailed product parameters table for B650I Night Devil motherboard

Image 2: Detailed Product Parameters

JGINYUE B650I Night Devil Motherboard Specifications
FeatureSpecification
CPU SupportAMD AM5 socket Ryzen 7000, 8000, 9000 series processors
ChipsetAMD B650 chipset
Memory Slots2×288-pin DDR5 SDRAM slots, Dual channel
Max. RAM Capacity96GB
Memory StandardDDR5 4800, 6000/6400 (O.C), 6800 (O.C) MHz (up to 7200MHz with overclocking)
BIOSAMI EFI BIOS
Rear Panel I/O1x DP, 1x HDMI, 3x USB 3.2 Gen1, 1x Type-C, 1x RJ45, 2x USB 2.0, 1x WIFI Interface (supports 2230 WIFI module), 1x Audio Interface
Internal Interfaces1x 24-pin ATX power, 1x 8-pin ATX 12V power, 2x USB 2.0 headers, 1x USB 3.0 header, 1x F_AUDIO, 1x F_PANEL, 2x fan headers, 4x SATA 3.0, 2x RGB headers, 1x Type-C slot
Sound CardOnboard 6-channel HD Audio Codec
NetworkOnboard 1x2.5Gbps adaptive network interface
Expansion Slots1x PCIE x 16 slot, 2x M.2 hard disk interfaces
Form FactorMini-ITX (17cm × 17cm)
Motherboard dimensions showing 17cm by 17cm

Image 3: Motherboard Dimensions

4. Motherboard Layout

The following diagram illustrates the key components and connectors on the B650I Night Devil motherboard. Refer to the 'Onboard Socket Interface Introduction' section for detailed descriptions of each numbered socket.

Motherboard layout diagram with numbered components

Image 4: Motherboard Layout Diagram

Rear I/O panel of the motherboard, showing various ports

Image 5: Rear I/O Panel

5. Setup Instructions

5.1. Onboard Socket Interface Introduction

This section details the various connectors on your motherboard. Ensure proper orientation and connection for all components.

F_PANEL (Front Control Panel Interface Headers)

These headers connect to your PC case's front panel power switch, system reset switch, system indicator, and hard disk indicator. Pay attention to pin polarity.

Pin FunctionDescription
PWR LEDConnect to front panel power indicator wire.
PWR ONConnect to front panel power switch wire.
HDD LEDConnect to front panel hard disk indicator wire.
RESETConnect to front panel reset switch wire.

CPU_FAN/SYS_FAN (Cooling Fan Power Sockets)

These are 4-pin connectors for cooling fans.

  • CPU Fan: Speed adjusts based on detected CPU temperature.
  • SYS Fan: Case fan with non-adjustable speed (supply voltage fixed).

Note: Fan connectors are not jumpers. Do not install jumper caps on these connectors.

ATXPWR (8-pin 12V Power Socket/24-pin ATX Main Power Socket)

The power supply provides stable power to all motherboard components. Ensure the power supply is off and all components are properly installed before connection. Sockets feature a foolproof design; insert in correct orientation.

  • The PWR12V socket supplies power to the CPU. The system will not boot without this connection.
  • For 20-pin ATX power supplies, connect to the side near pin 1 & pin 13.

F_USB1/FP_USB3.0 (USB Expansion Interface Socket)

This socket supports USB2.0/1.1 specifications. Via an optional USB expansion bracket, one socket can be connected to two USB ports.

PinDefinitionPinDefinition
1VCC2VCC
3Data 0-4Data 1-
5Data 0+6Data 1+
7Ground8Ground
10NC

F_AUDIO1 (Front Audio Output Socket)

This socket is for connecting your front panel audio. Ensure correct pin alignment.

PinPin SilkscreenPin Definition
1PROTILMicrophone Left Channel
2AGNDGround Pin
3PROTIRMicrophone Right Channel
4NCNot Connected
5PORT2RFront Right Channel Input Pin
6SENSE1_RETURNMicrophone Signal Detection
7SENSE_SENDDetection Signal from HD Encoder
8NCNot Connected
9PORT2LFront Left Channel Input Pin
10SENSE2_RETURNFront Left/Right Channel Signal Detection

Storage and Expansion Slots

  • M.2 HDD Slot: The motherboard includes two M.2 interfaces for NVMe SSDs.
Close-up view of the NVME M.2 slot on the motherboard

Image 6: NVME M.2 Slot

  • SATA 3.0 Slot: Four SATA 3.0 interfaces are available for traditional storage devices.
  • PCIE x16 Slot: One PCI-E 4.0 x16 slot for graphics cards.
  • Type-C Slot: An internal Type-C slot capable of extending 1 external USB 3.2 Gen1 interface.
  • RGB Slot: Two RGB headers for connecting compatible lighting devices.

Rear Panel Interface (I/O)

  • DP Interface: Digital Video Interface
  • HDMI Interface: High-Definition Multimedia Interface
  • USB Ports: USB2.0 (Black) / USB3.2 Gen1 (Blue)
  • Type-C Interface
  • RJ-45 Network Port: Onboard 2.5Gbps adaptive network interface.
  • M.2 WIFI Slot: Supports 2230 WIFI module.
  • Audio: Mic-In (Microphone), Line-Out (Audio Output), SPDIF Out (Optical Audio).

6. Operating Instructions

6.1. BIOS Configuration

The motherboard uses AMI EFI BIOS. To enter BIOS setup, press <Del> immediately after restarting the system.

6.2. Fan Control

The CPU fan speed is automatically adjusted based on the detected CPU temperature. System fan (SYS_FAN) operates at a fixed supply voltage, meaning its speed is not adjustable via the motherboard's temperature sensors.

7. Maintenance

  • Cleaning: Regularly clean dust from the motherboard and cooling components using compressed air. Ensure the system is powered off and unplugged before cleaning.
  • BIOS Updates: Check the official JGINYUE website for the latest BIOS updates to ensure optimal performance and compatibility. Follow the provided instructions carefully when updating the BIOS.
  • Environmental Conditions: Operate the motherboard within recommended temperature and humidity ranges to prevent damage.

8. Troubleshooting

8.1. Clearing CMOS (CMOS Clear Button)

CMOS settings may need to be cleared in the following scenarios:

  • CMOS data corruption.
  • Forgotten administrator/user password in the BIOS menu.
  • Failure to boot due to incorrect CPU frequency settings in the BIOS menu.
  • Replacement of CPU or memory module.

To clear CMOS settings and load defaults:

  1. Power off the PC and disconnect the power cord.
  2. Press and hold the JCMOS button for approximately 2-3 seconds, then release.
  3. Power on the system.
  4. If CPU frequency settings in BIOS are incorrect, press <Del> immediately after restart to enter BIOS setup.
  5. Reset CPU operating speed to default or an appropriate value.
  6. Save settings and exit BIOS setup.

Note: Do not clear CMOS without disconnecting the power cord, as this may damage the motherboard.

8.2. General Troubleshooting Tips

  • No Power: Ensure all power cables (24-pin ATX and 8-pin CPU) are securely connected. Check power supply functionality.
  • No Display: Verify that the graphics card (if dedicated) is properly seated and connected to the monitor. If using integrated graphics, ensure the monitor is connected to the motherboard's video output.
  • System Instability: Check RAM seating and compatibility. Ensure CPU cooler is properly installed and making good contact.

9. User Tips

  • When installing the CPU, ensure careful alignment with the socket to prevent pin damage.
  • For optimal performance, ensure your DDR5 RAM modules are installed in the correct dual-channel configuration as specified in the full manual.
  • Always refer to the official website for the most up-to-date drivers and BIOS versions.

10. Frequently Asked Questions (FAQ)

Q: Does this motherboard support AMD Ryzen 5 8600G?
A: Yes, the JGINYUE B650I Night Devil motherboard supports AMD AM5 Ryzen 7000, 8000, and 9000 series processors, including the Ryzen 5 8600G.
Q: What is the maximum RAM capacity?
A: The motherboard supports a maximum of 96GB DDR5 RAM across its two slots.
Q: Where can I find a more detailed manual?
A: A more detailed manual for this product is available on our official website. For access, please visit www.jginyue.com. You can also find the PDF version here: User manual (PDF).

11. Warranty and Support

For detailed warranty information, technical support, and additional resources, please visit the official JGINYUE website at www.jginyue.com. You can also refer to the comprehensive user manual available as a PDF: User manual (PDF).

Our company reserves the right to revise the content of this guide without prior notice as products are continuously improved and updated.

© 2024 JGINYUE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.