EURS PZ300--4

Contents

EURS Car Parking Rearview Mirror Wireless Reversing Radar System

Model: PZ300--4

Brand: EURS

Introduction

Thank you for choosing the EURS high-quality parking sensor system. This product is designed as an auxiliary warning device to assist with reversing maneuvers and is not intended to directly control the vehicle's reversing function. Please read this manual carefully before installation and use to ensure proper operation and safety.

Safety Information

  • The system is an auxiliary device; always exercise caution and check your surroundings visually when reversing.
  • Ensure the sensor surfaces are kept clean for optimal performance.
  • Do not damage or cut the sensor wires during installation or use.
  • When reversing with the system, maintain a low speed to allow for proper detection and reaction time.
  • Avoid placing the main control unit (host) in hot, humid, or water leakage-prone areas.

Package Contents

The package includes the following components:

Detailed view of individual components: control box, mirror, power cable, sensor cables, hole saw, manual, adhesive pads.
Detailed view of the system components, including the control box, rearview mirror display, power cable, sensor cables, hole saw, user manual, and adhesive pads.
  • Rearview Mirror Display with LED indicator
  • Main Control Unit (Host)
  • 4 Parking Sensors (available in various colors like black, silver, gray, white, blue, red)
  • Power Cable (for control unit)
  • Cigarette Lighter Power Adapter (for mirror display)
  • Sensor Cables
  • Hole Saw (22mm diameter) for sensor installation
  • Adhesive Pads
  • User Manual
Main product components: rearview mirror display, control box, 4 parking sensors, cigarette lighter power adapter.
Overview of the main components of the EURS Car Parking Rearview Mirror Wireless Reversing Radar System.

Specifications

Parking Sensor Parameters

FeatureSpecification
Voltage9-15 DCV
Rated Voltage12DCV
Power Consumption<0.5W
Detection Range0.3 - 2.0m
Sensor Diameter22mm
Sensor AngleX Y 60 degrees
Alarm Volume65dB
Working Temperature-30°C to +80°C
Wireless Power10mW
Wireless Frequency433MHZ/2.4GHZ

TFT Monitor Parameters

FeatureSpecification
Work Voltage9-15 DCV
Rated Voltage12DCV
Power Consumption<3W
Display Resolution320RGB*240 / 480RGB*234
Display Ratio4:3 / 16:9
Video Input2 Way
Working Temperature-30°C to +80°C

Camera Parameters (if connected)

FeatureSpecification
Voltage9-15 DCV
Rated Voltage12DCV
Power Consumption<1.5W
Sensor TypeColor CMOS/CCD
Total Pixels640*480
Angle170 degrees
Mini Illumination1lux/0lux(LED)
Video Output1.0vPP CVBS (L=75R)
Working Temperature-30°C to +80°C

Setup and Installation

1. Main Control Unit (Host) and Monitor Installation

  • Monitor Placement: Generally, the rearview mirror display should be affixed to the upper left corner of the cab, ensuring it is convenient for the driver to view.
  • Host Placement: The main control unit (host) is typically installed on either side of the car's rear trunk area. Ensure the chosen location avoids excessive heat, humidity, and potential water leakage.
Rearview mirror display dimensions (290mm length, 75mm height) and its placement in a car interior.
The rearview mirror display, showing its dimensions and typical placement in a car's interior.

2. Sensor Installation

  • Sensor Placement: The parking sensors should be mounted in the rear bumper of the vehicle. For 4-sensor systems, these typically cover the rear. For 8-sensor systems, the rear 4 sensors activate when reversing, and the front 4 sensors activate when braking.
  • Installation Height: Sensors should be installed at a horizontal interval, with the surface being flat. The recommended installation height is between 0.5 to 0.8 meters from the ground.
  • Drilling: Use the provided 22mm hole saw to drill holes in the bumper for the sensors.
Parking sensor installed on a car bumper, showing 22mm diameter.
Example of a 22mm parking sensor installed on a car bumper.

3. Wiring Diagram

The system requires connection to the vehicle's power supply and reversing lamp circuit. For models with camera input, connect the camera to the appropriate video input on the monitor.

Diagram showing connections for 4-sensor and 8-sensor systems, including power, ground, reversing lamp, and brake lamp connections.
Wiring diagram for the parking sensor system. Connect the monitor to the cigarette lighter, and the main control unit to the red reversing lamp and black GND. For 8-sensor systems, also connect to the blue brake lamp.

Note: For 6-sensor systems, sensors F and G are not required. When reversing, the rear 4 sensors will activate. When braking, the front 4 sensors will activate (if installed). The front 4 sensors have a detection range of approximately 1 meter.

Operation

When the vehicle is put into reverse gear, the parking sensor system automatically activates. The rearview mirror display will show the distance to obstacles and provide audible alerts.

  • LED Display: The mirror display features an LED screen that shows the distance to obstacles, typically with a digital readout and color-coded bars (e.g., green, yellow, red) indicating proximity.
  • Audible Alarm: As the vehicle approaches an obstacle, the system will emit an audible alarm. The frequency of the beeps increases as the distance decreases, becoming a continuous tone when very close.
  • Video Input: If a rearview camera is connected, the monitor will automatically switch to the camera feed when reversing, providing a visual aid in addition to the sensor data.
Video demonstrating the parking sensor system's operation, showing distance detection and audible alerts.

Maintenance

  • Regularly clean the surface of the parking sensors to ensure accurate detection. Dirt, mud, snow, or ice can impair performance.
  • Check all wiring connections periodically to ensure they are secure and free from corrosion or damage.
  • Keep the rearview mirror display clean and free from obstructions for clear visibility.
  • Avoid using harsh chemicals or abrasive materials when cleaning the system components. Use a soft, damp cloth.

Troubleshooting

Common Issues and Solutions

  • Inaccurate or No Detection:
    • Check if sensor surfaces are clean.
    • Verify all sensor connections to the main control unit.
    • Ensure sensors are installed at the correct height and on a flat surface.
    • Note that detection may be difficult on slick slopes, slick rounded objects, or soft materials like cotton textile.
  • Display Not Working:
    • Check the power connection to the rearview mirror display.
    • Ensure the vehicle's ignition is on and reverse gear is engaged (for activation).
  • No Audible Alarm:
    • Verify the main control unit is powered and connected correctly.
    • Check for any obstructions around the buzzer (if external).
  • Interference:
    • Wireless systems can sometimes experience interference. Ensure no other 2.4GHz devices are causing issues.

User Tips

  • The system's monitor can function as a good substitute for your car's original rearview mirror, especially with a connected camera.
  • Consider connecting a rearview camera to fully utilize the 2-way video input feature for enhanced visibility when reversing.
  • Always perform a quick check of the sensor surfaces before driving, especially in adverse weather conditions, to ensure they are clean.

Frequently Asked Questions (FAQ)

Q: Can a rearview camera be connected to this system?
A: Yes, the system's TFT monitor supports 2-way video input, allowing for the connection of a rearview camera.
Q: Does the mirror function as a regular rearview mirror?
A: Yes, the product is designed to replace or clip over your existing rearview mirror, providing both a reflective surface and the integrated display for parking assistance.

Warranty and Support

For detailed warranty information and customer support, please refer to the official user manual PDF or contact EURS customer service. The product complies with EN 55022:2010 and EN 55024:2010 standards.

A comprehensive user manual is available for download: Download User Manual (PDF)

© 2024 EURS. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.