1. Product Overview
The Ligghig E27 PIR Motion Sensor Socket Converter is an intelligent light accessory designed to automatically control E27 screw-type lamps based on human motion detection. It is compatible with LED lamps, energy-saving lamps, incandescent lamps, and fluorescent lamps. This device offers convenience, safety, and energy efficiency by turning lights on when motion is detected and off when the area is vacated.
2. Setup and Installation
The installation of the E27 PIR Motion Sensor Socket Converter is straightforward. Ensure the power to the light fixture is turned off before installation.
- Screw the E27 PIR Motion Sensor Socket Converter directly into your existing E27 lamp holder.
- Screw your E27 bulb (LED, energy-saving, incandescent, or fluorescent) into the E27 socket of the converter.
- Ensure both connections are tightened securely.
- Turn on the power to the light fixture.
The recommended installation height for optimal performance is between 2 to 3.5 meters.
3. Operating Instructions
The sensor detects changes in the infrared spectrum of the human body within its sensing range. When motion is detected, the light automatically turns on. The light will turn off after a set delay once no further motion is detected.
3.1. Adjustment Dials
The device features two adjustable dials: TIME and LUX.
- TIME: This dial adjusts the delay time for the light to turn off after motion ceases. The adjustable range is approximately 10 seconds to ±5 minutes.
- LUX: This dial controls the ambient light threshold for the sensor to operate.
- When adjusted to the 'sun' position, the sensor will operate throughout the day (24-hour detection).
- When adjusted to the 'moon' position, the sensor will only activate when the ambient light is insufficient (i.e., at night).
3.2. Sensing Performance
- Detection Angle: 360° full range detection without blind spots.
- Detection Distance: Up to 6 meters (at temperatures below 24°C).
4. Maintenance
The E27 PIR Motion Sensor Socket Converter is constructed from flame-retardant ABS material, designed for durability and safety, preventing fire hazards, deformation, and oxidation.
- Cleaning: To clean the device, gently wipe it with a dry, soft cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the surface or internal components.
- Inspection: Periodically check the connections to ensure they remain secure.
- Environment: Avoid installing the device in areas with extreme temperatures or high humidity, although it is designed to operate within a wide range.
5. Troubleshooting
If you encounter issues with your E27 PIR Motion Sensor Socket Converter, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light turns on for one second then off, or does not turn on at all. | Incorrect LUX setting for current ambient light conditions. | Adjust the LUX dial towards the 'sun' position for all-day operation, or ensure it's in the 'moon' position for night-only use in sufficiently dark conditions. |
| Light does not always detect motion or is insensitive. | Obstructions in the sensing path; sensor placed too high or too far; insufficient movement. | Ensure a clear line of sight for the sensor. Verify installation height is within 2-3.5 meters. Consider repositioning for better coverage of the desired area. |
| Light stays on too long or turns off too quickly. | Incorrect TIME setting. | Adjust the TIME dial to increase or decrease the delay time as needed. |
6. Specifications
| Parameter | Value |
|---|---|
| Product Name | E27 lamp holder 360° |
| Model Number | AC100-240V E27 Socket |
| Material | Flame retardant ABS |
| Detection Angle | 360° |
| Power Consumption | 0.24W |
| Detection Distance | 6M Max (<24°C) |
| Working Temperature | -20°C ~ +40°C |
| Product Size (L*W*H) | 56*56*118mm |
| Installation Height | 2-3.5M |
| Ambient Light | 3-2000LUX (Adjustable) |
| Working Voltage | AC100-240V |
| Working Frequency | 50/60Hz |
| Working Humidity | < 93%RH |
| Delay Time | 10 seconds ~ ±5 minutes (adjustable) |
| Rated Load | < 60W Max. (E27 LED lamp, energy-saving lamp) |
| Net Weight | 66g |
| Gross Weight | 82g |
7. User Tips
- Optimal Placement: For applications like closet lights, consider the sensor's placement carefully to ensure it reliably detects smaller movements like an arm or hand entering the space.
- Adjusting Delay: The time setting can be adjusted for a long duration. Experiment with the TIME dial to find the ideal delay for your specific use case, even small adjustments can significantly change the duration.
- Hands-Free Convenience: This sensor is particularly useful in situations where your hands might be occupied or dirty, such as after walking a pet or carrying groceries, eliminating the need to search for a light switch in the dark.
8. Warranty and Support
The product comes with a warranty as described by the seller. For specific warranty terms and conditions, please refer to the product listing or contact the seller directly.
For additional guidance and documentation, you may refer to the official item guides and documents, such as the user manual in PDF format, which can be found at the following link: PIR Sensor Lamp Holder Instruction (PDF).