1. Introduction
Thank you for choosing the LS VISION 5MP Mini 4G/WiFi Security Camera. This compact and versatile camera is designed for indoor surveillance, offering high-definition video, human detection, two-way audio, and flexible connectivity options (4G or WiFi). Please read this manual carefully before operating the device to ensure proper setup and optimal performance.

2. What's in the Box
- 1 x Instruction Manual
- 1 x Battery Camera
- 1 x Type-C Charging Cable
- 1 x Bracket
- 1 x Screw Fittings

3. Product Description
Camera Components

Connectivity Options

4. Setup
4.1 APP Installation
- Scan the QR code below or search for 'UBox' in the App Store (for iOS) or Google Play Store (for Android) to download and install the app.

4.2 APP Registration
- Open the app, enter your E-mail address, then press 'Register'. Check and select to agree to the agreement. You will receive a verification email.
- Set and confirm your login password, then press 'Register' to proceed.
- A verification email will be sent to you. Go to your mailbox and click the link to complete the verification.
- Enter your E-mail address and password, then click 'Login'. The app will auto-fill account information.
4.3 Device Connection
- Press 'Add Family', then set the room or position as per reminders.
- Enter your family name and then press 'Next'.
- Input necessary information like Country, Province, then press 'Done'.
- Press 'Add a device' to add a smart device.
For WiFi Device Connection:
- Connect the device to a power supply and ensure your mobile phone is connected to an available Wi-Fi network. Then press 'Setup device'.
- After powering on the device, wait for the device's blue LED to blink, which means your device is in pairing mode. If the blue LED is not blinking, press the power/call key to wake up the device, then hold and press the RESET button. The device will reboot and enter the pairing state.
- The app will automatically input the Wi-Fi name. Please input the correct Wi-Fi Password. Then you can choose QR code configuration or Soundwave configuration.
- For QR code configuration: Select the QR code configuration, then the mobile phone will display a QR code. Use the device to scan the QR code from 10cm away from the mobile phone.
For 4G Device Connection:
- Insert the SIM card into the device, then insert the battery. Some models may require antenna installation.
- After powering on the device, wait for about 1 minute for the device's blue LED to light up, then press 'Next'. If the blue LED does not light up, please check the configuration notes below.
- The app will search for the device automatically; this may take 5-50 seconds.
- Find the UID QR code on the device, then use the app to scan the QR code.
- Set the device name and select the device location before setup.
- The device will automatically enter the device list. Setup is successful! The device is ready to use.
5. Operating the Camera
5.1 Using the UBox App
The UBox app provides comprehensive control and monitoring features for your camera:
- Family/Smart Device Location: Enter to select your family or smart device location.
- Push Notifications: Turn on/off push notifications for alerts.
- Settings: Access sharing options, cloud storage management, and other device settings.
- Preview Section: Press to enter the live preview section.
- Add/Delete Device: Manage your smart devices.
- Account Management: Access account and value-added account management.
- Playback: Click the 'Calendar' icon on the top right corner, then choose the date to playback videos from cloud storage or Micro SD card.
- Screen Capture: Take screenshots of the live view.
- Video Recording: Record video from the live stream.
- Microphone: Speak through the app to the smart device side (two-way audio).
- Network Signal: Inspect the network signal strength.
- Version Information: View the app version.
5.2 Key Features
PIR Humanoid Detection Alarm
When a moving object is detected, the camera starts working and can trigger video storage, phone alarms, and human detection alerts.

Two-way Audio
The camera features a built-in microphone and Hi-Fi speakers, allowing for two-way communication through the UBox app.

Day and Night Vision
The camera provides clear HD image quality during the daytime and automatically switches to infrared night vision for monitoring in low-light conditions.

6. Maintenance
6.1 Battery Management
The device is equipped with rechargeable lithium batteries (3800mAh). Battery life is affected by monitoring activity. To maximize battery life:
- In crowded environments, it is recommended to turn off the device or set PIR detection to 'Low' or 'Disabled' to reduce device wake-ups.
- The camera has a low power consumption design. Each time it is awakened, it will work for a few seconds before entering standby mode to save power. You can adjust the work time in the app settings.

6.2 Network Connectivity
- Place the device within the signal range of your Wi-Fi router.
- Avoid placing thick or insulating objects between the device and the router, as this may cause weak Wi-Fi signals.
- Ensure the Wi-Fi signal is at a good level when using the device.
6.3 Cloud Storage and Local Storage
This device provides one month of free cloud storage and face recognition services. If you wish to continue using value-added services after the trial period, you will need to purchase them in the app. The camera also supports local storage via a Micro SD card (up to 128GB).
7. Troubleshooting
- Device Blue LED Not Lighting Up (4G Version): If the blue LED does not light up after inserting the SIM card and battery, ensure the SIM card is correctly inserted and active. Try restarting the device.
- PIR Detection Sensitivity: If the camera is not detecting movement reliably or is triggering too often, adjust the PIR detection sensitivity in the app settings (Disabled, Low, Medium, High). Note that PIR sensors detect heat signatures, not pixel changes, and may not detect movement through glass.
- Memory Card Not Recognized: Ensure the Micro SD card is correctly inserted and formatted. The camera supports up to 128GB. If issues persist, try a different card.
- Image Quality/Blurriness: Ensure the lens is clean. Check the app settings for resolution options (HD/SD). Objects far away may appear blurry, especially if the zoom is digital.
- Remote Viewing of Recordings: Without a paid cloud subscription, remote viewing of recordings stored on the Micro SD card may be limited or unavailable through the app. You might need to physically remove the card to view recordings on a computer.
- SIM Card Compatibility (4G Version): Ensure your 4G SIM card is compatible with the camera's network bands in your region. Some users have reported issues with specific carriers.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | LS-BC1 |
| Brand Name | LS VISION |
| Megapixels | 5 MP (High Definition: 5.0 Megapixels) |
| Connectivity | WIFI(2.4GHz) / 4G (SIM Card) |
| Power Mode | Battery Powered (Built-in 3800mAh) |
| Power Supply(V) | 5V 2A |
| Operating Temperature | -10°C to 60°C |
| Viewing Angle | 100° |
| Lens (mm) | 3.26 MM |
| IR Distance(m) | 10m |
| Dimensions (L x W x D)(mm) | 40*40*58mm |
| Supported Mobile Systems | Android, IOS |
| Sensor | CMOS |
| Video Compression Format | H.264, H.265 |
| AI Functions | Human Detection |
| App | UBOX |
| Installation | Side, Normal, Stick |
| Internal Storage | Supports up to 128G TF Card (not included) |
| Shell Material | Plastic |
| Certification | CE, FCC, RoHS |
| Alarm Type | Telefon Alarm, Local Alarm |
| Package Dimensions | 13cm (L) x 10cm (W) x 8cm (H) |
| Package Weight | 0.3 kg |
9. User Tips
- Optimize Battery Life: Adjust PIR sensitivity to 'Low' or 'Disabled' in high-traffic areas to conserve battery.
- Remote Recording Access: For seamless remote access to recorded videos, consider subscribing to the cloud storage service. Local Micro SD card recordings may require physical access to the card for full viewing without a subscription.
- 4G SIM Card Check: If using the 4G version, verify that your SIM card is compatible with local network bands and has an active data plan.
- PIR Sensor Limitations: The PIR sensor detects heat and motion, so it may not reliably detect movement through glass.
- Image Clarity: Ensure the camera lens is clean for optimal image quality.
10. Warranty and Support
For detailed information regarding warranty, returns, or technical support, please refer to the official product documentation or contact the seller directly. A comprehensive user manual in PDF format is available for download: View User Manual (PDF).