Introduction
The LAUNCH i-TPMS Tire Pressure Detection Handheld Terminal is an upgraded model of the TSGUN, designed as a professional tire pressure diagnostic tool. It integrates TPMS sensor activation, reading, learning, and programming functionalities. This device can be used in conjunction with the i-TPMS mobile phone application to perform tire pressure activation, programming, and ID copying tasks.
The i-TPMS offers versatile operation modes:
- With an X-431 scanner: Provides comprehensive functions including Activation, Programming, Relearn, and Diagnosing for sensors.
- Standalone with the i-TPMS app: Supports Activation and Programming for sensors.
It is compatible with all 315/433MHz sensors and supports unlimited programming for LAUNCH sensors to replace Original Equipment (OE) sensors.
Safety Precautions
Read all safety warnings and instructions carefully. Failure to heed these warnings and instructions may result in electric shock, fire, and/or serious injury. Save all safety warnings and instructions for future reference.
- There are no user serviceable parts. Have the device serviced by a qualified repair person using only identical replacement parts. This will ensure the safety of the device is maintained. Disassembling the device will void the warranty.
- CAUTION: This device contains an internal Lithium Polymer battery. The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush, pierce, or dispose of the battery in fire or water.
- This product is not a toy. Do not allow children to play with or near this item.
- Do not expose the device to rain or wet conditions.
- Do not place the device on any unstable surface.
- Never leave the device unattended during the charging process. The device must be placed on a non-flammable surface during charging.
- Handle the device with care. If the device is dropped, check for breakage and any other conditions that may affect its operation.
- Put blocks in front of the drive wheels and never leave the vehicle unattended while testing.
- Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
- Keep the device dry, clean, free from oil, water, or grease. Use a mild detergent on a clean cloth to clean the outside of the device when necessary.
- People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemakers could cause pacemaker interference or pacemaker failure.
- Use the device only with the specific diagnostic tool that comes loaded with the TPMS module and the Android smartphone that is installed with i-TPMS app.
- Do not install programmed TPMS sensors in damaged wheels.
- While programming a sensor, do not place the device close to several sensors at the same time, which may result in programming failure.
- The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
FCC Statement
Note: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Components & Controls
The i-TPMS device features a user-friendly interface with clearly labeled buttons and a display screen. Below is a diagram illustrating the main components and controls:
- Charging LED: Red indicates charging; Green indicates fully charged.
- UP Button: Used for navigation and selection.
- DOWN Button: Used for navigation and selection.
- Charging Port: Connect the USB charging cable here.
- Sensor Slot: Insert the TPMS sensor into this slot to activate and program it.
- Display Screen: Shows device status, menus, and data.
- POWER Button: Press and hold for about 3 seconds to turn the tool on/off.
- OK (Confirm) Button: Press to confirm selections or operations.
Technical Parameters
| Name | Parameter |
|---|---|
| Model | i-TPMS |
| Display | 1.77 inches |
| Resolution | 168*128 pixels |
| Battery | 2000mAh |
| OBDII Input Voltage | 9V ~ 18V |
| DC input voltage | 5V |
| Operating Current | ≤1A |
| Operating Temperature | -10℃~50℃ |
| Storage temperature | -20℃~60℃ |
| Size | 205*57*25.5mm |
Accessory Included
When opening the package for the first time, please carefully check the following components. Common accessories are included, but for different configurations, the accessories may vary. Please consult the seller for specific package contents.
- i-TPMS Device: The main handheld terminal.
- USB Cable: For charging the i-TPMS device.
- User Manual: This document provides detailed instructions. (A PDF version is available at User manual (PDF))
- Optional Sensors: Depending on the package, the device may come with RF03 or RF05S sensors.
Working Principle
The i-TPMS device communicates wirelessly to perform its functions. It can connect to either a compatible LAUNCH diagnostic tool (with TPMS module) or an Android smartphone running the i-TPMS app via Bluetooth.
Notes:
- The diagnostic tool must be a specific scanner loaded with the TPMS module.
- Due to hardware limitations, the i-TPMS app on the smartphone achieves fewer functions than the TPMS module on the specific diagnostic tool.
- A stable wireless communication should be established between the i-TPMS and the diagnostic tool or smartphone.
Setup
1. Charging & Powering On
Plug one end of the charging cable into the charging port of the i-TPMS, and the other end to an external power adaptor (not included), then connect the power adaptor to the AC outlet. While being charged, the LED illuminates red. Once the LED changes into green, it indicates the charging is complete.
Press the POWER button for about 3 seconds to turn it on. A beep will sound and the screen will light up.
2. Button Operations
- UP/DOWN Buttons: Switches to different tire positions or navigates menus.
- POWER Button: Press for about 3 seconds to turn it on/off. Press once to enter hibernate mode. If the device is not charged and there is no operation for 30 minutes, it will automatically power off. If the device is charging and there is no operation for 5 minutes, it will automatically enter hibernate mode to conserve battery power. Press once to wake it up from hibernate mode.
- OK Button: Press to confirm the current operation.
3. i-TPMS App Download (Only for Android Smartphone users)
For Android system smartphone users, scan the QR code below or the QR code on the back of the i-TPMS device to download and install the i-TPMS app on your phone.
Watch this video for a visual guide on how to use the i-TPMS:
Operating
Getting Started Flow Chart
For initial use, please follow these steps:
- Enter TPMS/i-TPMS on the diagnostic tool/smartphone.
- Search for the desired i-TPMS and connect it via Bluetooth. (Ensure device is powered on. If firmware is too low, it will automatically upgrade.)
- Select target region.
- Select vehicle manufacturer.
- Select vehicle model and year.
- Select the TPMS function.
- Follow on-screen instructions to proceed.
Job Menu (i-TPMS App)
This section applies to Android smartphone users with the i-TPMS app. The app screen will display:
- Display mode switch button: Tap to switch between different display modes.
- Settings button: Tap to enter the settings screen.
- Bluetooth pairing button: Tap to scan for available Bluetooth devices and pair. A link icon appears on screen after pairing.
- Function module:
- Select Vehicle: Tap to select the desired vehicle manufacturer.
- OE Query: Tap to check the OE number of the sensors.
- History Report: Tap to view historical TPMS test reports.
1. Activate Sensor
This function allows users to activate a TPMS sensor to view sensor data such as sensor ID, tire pressure, tire frequency, tire temperature, and battery condition.
The tool performs TPMS tests in a sequence: Front Left (FL), Front Right (FR), Rear Right (RR), Rear Left (RL), and SPARE (if applicable). You can use the UP/DOWN buttons to move to the desired wheel for testing.
For universal sensors, place the i-TPMS alongside the valve stem, point toward the sensor location, and press the OK button. Once activated and decoded, the i-TPMS will vibrate slightly, and the screen will display the sensor data.
Notes:
- For early magnet-activated sensors, place the magnet over the stem and then place the i-TPMS alongside the valve stem.
- If the TPMS sensor requires tire deflation (of the order of 10PSI), then deflate the tire and place the i-TPMS alongside the stem while pressing the OK button.
2. Program Sensor
This function allows users to program sensor data to a specific brand sensor, replacing faulty sensors or those with low battery life. Four programming options are available:
- Auto Create: Programs the sensor by applying random IDs created according to the test vehicle when the original sensor ID cannot be obtained.
- Manual Create: Allows users to manually enter a random or original sensor ID.
- Copy by Activation: Writes retrieved original sensor data to the new sensor after triggering the original sensor.
- Copy by OBD: Writes saved sensor information to the LAUNCH sensor after performing Read ECU ID. Requires connection to the vehicle's DLC port.
Note: Do not place the device close to several sensors at the same time during programming, as this may result in programming failure.
3. Relearning (Only available on diagnostic tool)
This function writes newly programmed sensor IDs into the vehicle's ECU for sensor recognition. Relearn operation is necessary when the new sensor IDs differ from the original IDs stored in the vehicle's ECU. There are three methods for relearning:
- Static Learning: Requires the vehicle to be put into learning/retraining mode, then follow on-screen prompts.
- Self-Learning: For some vehicles, learning can be completed by driving. Refer to on-screen steps.
- Relearn by OBD: Activate all sensors, then use the diagnostic tool with the included VCI to complete learning steps via the vehicle's DLC port.
Maintenance
To ensure the longevity and optimal performance of your i-TPMS device, follow these maintenance guidelines:
- Keep the device dry, clean, and free from oil, water, or grease.
- Use a mild detergent on a clean cloth to clean the outside of the device when necessary.
- Store the device within the recommended storage temperature range of -20°C to 60°C.
- Avoid dropping the device. If dropped, inspect for any damage before further use.
Troubleshooting
Below are some frequently asked questions and their solutions:
- Q: Why does my i-TPMS always stay on the welcome screen?
- A: If the device keeps displaying the welcome screen, it indicates that it is not in TPMS function mode. If the diagnostic tool is performing the TPMS function, the device will switch to the corresponding function mode.
- Q: Can I set the system language of my i-TPMS?
- A: It varies with the system language of the diagnostic tool/smartphone that connects to it. Currently, only English and simplified Chinese are available on the device. If the device detects the system language of the diagnostic tool/smartphone is non-Chinese, it will change into English automatically, no matter which language the diagnostic tool/smartphone is set as.
- Q: My i-TPMS does not respond.
- A: In this case, please carefully check the following:
- Whether the device is successfully connected to the diagnostic tool/smartphone wirelessly.
- Whether the device is powered on.
- Whether the device is damaged or defective.
- Q: Why does my i-TPMS automatically power off?
- A: Please check the following:
- Whether the device is fully discharged.
- If the device is not being charged and there is no operation on the device for 30 minutes, it will automatically power off to conserve battery power.
- Q: My i-TPMS cannot trigger a sensor.
- A: Please check the following:
- Whether the device is damaged or defective.
- Whether the sensor, module, or ECU itself may be damaged or defective.
- The vehicle does not have a sensor even though a metal valve stem is present. Be aware of Schrader rubber style snap-in stems used on TPMS systems.
- Your device may require a firmware upgrade.
- Q: What to do if my i-TPMS encountered some unexpected bugs?
- A: In this case, a firmware upgrade is required. On the TPMS version selection screen, tap Firmware Update to upgrade it.
User Tips
- Software Updates: Ensure your device's software is updated for optimal performance and compatibility with various sensors (e.g., 315 MHz and 433 MHz).
- Programming Familiarity: Take time to understand the programming steps for your specific vehicle model to ensure correct sensor setup.
- App Functionality: While the i-TPMS app offers basic activation and programming, for full diagnostic and relearning functionality, it is recommended to use the device with a compatible LAUNCH X-431 scanner. The standalone app may have limited features compared to the scanner integration.
Warranty & Support
The Launch X431 i-TPMS Car Tire Pressure Detector comes with a 1-year warranty from the date of purchase.
For further assistance, technical support, or to access additional item guides and documents, please refer to the official user manual (PDF) available for download or contact your seller.