Hi-Link HLK-LD2451

Contents

HLK-LD2451 Vehicle Status Detection Module User Manual

Model: HLK-LD2451

Version: V1.02 Revision Date: 2024-06-27

1. Product Overview

1.1 Product Description

The LD2451 is a high-sensitivity 24GHz mobile vehicle status sensing module developed by Hi-Link Electronics. Its working principle involves using FMCW FM continuous wave to detect targets within the detection range. Combined with radar signal processing and accurate algorithm recognition, it achieves highly sensitive vehicle status detection. The module can identify vehicles that are near or far away, and calculates the output target speed, angle, distance, and other auxiliary information.

This product is primarily designed for outdoor scenes, sensing the presence of vehicles near or far from the area and providing real-time detection results. The maximum sensing distance can reach 100m. Mobile software is available to easily configure parameters such as sensing distance, speed, target direction, and sensitivity to suit various application needs.

The module supports GPIO and UART output, offering a plug-and-play solution that can be flexibly applied to different intelligent scenarios and end products.

1.2 Product Characteristics

  • Plug and play, easy assembly method
  • Sensing distance up to 100m
  • Multi-level intelligent parameterization to meet the needs of scene changes
  • Mobile debugging and configuration tools
  • Configurable detection distance (10-100m freely adjustable)
  • Wide detection angle covering up to 3 lanes of traffic
  • 24GHz ISM band, FCC and CE spectrum regulation certifiable
  • The Ultimate Cost-Effective Choice

2. Application Scenarios

The HLK-LD2451 vehicle sensing module can detect and recognize vehicles close to or far away, supports multi-level parameterization, and is widely applicable in various intelligent products and terminal products. Common applications include:

  • **Highway intersection:** Installed at highway intersections to sense the direction, speed, and distance of vehicles traveling on the highway, whether close or far away.
  • **Non-motorized road:** Detects blind spots in the rear field of vision, helping to prevent accidents caused by vehicles approaching from behind or sudden lane changes.
  • **Motorway:** Detects distant vehicles behind, assisting drivers in determining the trajectory of following vehicles.
  • **Smart Scene:** Senses the approach of vehicles for automatic control of road gates, garage doors, and other scenes, enabling automatic opening or closing.

3. Hardware Description

3.1 External Dimensions

HLK-LD2451 Module Physical Picture and Dimension Drawing
Figure 1: HLK-LD2451 Module Physical Picture and Dimension Drawing. Module size: 70mm x 35mm. Pin hole spacing: 2.54mm.

The module dimensions are 70mm x 35mm, with a pin hole spacing of 2.54mm.

3.2 Pin Definitions

HLK-LD2451 Module Pinout Diagram
Figure 2: HLK-LD2451 Module Pinout Diagram.
Table 1: HLK-LD2451 Pin Definitions
Pin Number Notation Name Function
1 VIN Power Input Power supply input 5V
2 GND POWER GROUND POWER GROUND
3 OT1 GPIO1 Indicator pin. Outputs high and low levels for 3 consecutive times on first start. High level when near target detected, low level when no target approach detected.
4 RX Serial RX Serial RX Pin
5 TX Serial TX Serial TX Pin
6 OT2 GPIO2 Temporarily unavailable

4. Use and Configuration

4.1 Typical Application Circuit

The LD2451 module primarily outputs detection results data through its serial port, following a prescribed protocol. It can also accept detection data via Bluetooth, with the serial port output content being identical. Users can flexibly integrate the module according to specific application scenarios.

The module requires a 5V power supply, and the input power supply capacity should exceed 300mA. The module's IO output level is 3.3V. The default baud rate for the serial port is 115200, with 1 stop bit and no parity bit.

4.2 Role of Configuration Parameters

Users can modify the module's configuration parameters via the serial port or Bluetooth to adapt to different application requirements. These configurations are saved and will not be lost after power-down.

Configurable parameters include:

  • **Maximum detection distance:** Sets the farthest distance at which targets will be detected and reported. Setting range: 0-100m.
  • **Inspection Direction:** Configurable to detect targets that are near, far, or both. When set to 'close', it outputs targets only when vehicles traveling in the same direction approach and meet specific conditions. When set to 'far away', it outputs targets only when opposite vehicles or the surrounding environment enter the detection range. When set to 'close and far away', it outputs detected target information regardless of direction.
  • **Detection speed:** Only targets with a speed greater than the set detection speed will be considered. Otherwise, they are ignored. Setting range: 0-120km/h.
  • **Detection delay:** The alarm delay time after the radar detects an approaching target. Range: 1-30s. If set to 5s, a 5s delayed alarm message is output. If another target is detected approaching within this period, the timer refreshes.
  • **Sensitivity:** This parameter has two sub-parameters: cumulative trigger count and signal-to-noise ratio threshold. Both can be set independently.
    • **Trigger Count:** Setting range: 1-10. If set to 3, the target must be triggered 3 consecutive times before detection information is reported.
    • **Signal-to-noise ratio threshold:** Setting range: 1-255. A lower value increases detection sensitivity, making the trigger more sensitive. A higher value decreases sensitivity, making the trigger more difficult. The default value is 4, and modification is not recommended under normal circumstances.

4.3 Mobile App Tool Description

To facilitate quick and efficient testing and configuration, a mobile APP tool is provided. Users can link the module via Bluetooth to configure and read parameters, and receive real-time detection results and target information.

Download Address:

APP Usage:

  1. After powering up the module, it will broadcast a Bluetooth signal with the name "LD2451_XXXX".
  2. Open the APP, grant necessary permissions, and click "Connect Module Bluetooth".
  3. Detected target data information and corresponding protocol data will be displayed in the interface upon successful connection.
  4. Click the settings icon in the upper right corner to enter the parameter setting interface, where you can adjust the configurable parameters mentioned above.
HLK-LD2451 APP Detection Data Interface
Figure 3: Example of HLK-LD2451 APP Detection Data Interface showing an approaching target.
HLK-LD2451 APP Parameter Setting Interface
Figure 4: Example of HLK-LD2451 APP Parameter Setting Interface.

4.4 Installation Schematic and Mounting Orientation

HLK-LD2451 Module Installation Placement
Figure 5: HLK-LD2451 Module Installation Placement.

4.5 Installation Conditions and Precautions

Verify minimum mounting clearance:

If the radar module is to be fitted within an enclosure, the enclosure must possess good wave-transmission characteristics at 24 GHz. It must not contain metallic materials or materials that shield against electromagnetic waves.

Precautions for installation:

  • Ensure that the radar antenna faces the area to be detected as much as possible, and that the area around the antenna is open and unobstructed.
  • Ensure the sensor is mounted in a firm and stable position. Shaking of the radar itself can affect detection results.
  • It is crucial to ensure that the back of the radar is not subject to object movement or vibration. Since radar waves are penetrating, the antenna signal from the back flap may detect moving objects behind the radar. A metal shield or metal backing plate can be used to shield the radar's back flap and attenuate the effect caused by objects behind the radar.

5. Performance and Electrical Parameters

Table 2: HLK-LD2451 Performance and Electrical Parameters
Parameter Value
Operating frequency 24GHz~24.25GHz (Complies with FCC, CE, No Commission certification standards)
Power requirements DC 5V, capacity >300mA
Average operating current 107mA
Modulation method FMCW
Connector 2 GPIO, IO level 3.3V, 1 UART
Target application Outdoor vehicle target detection
Detection distance Up to 100m
Detection angle ±15°
Sweep bandwidth <200MHz (Meets FCC, CE, and No)
Operating temperature -40~85°C
Overall dimensions 70mm x 35mm
Measured module operating current graph
Figure 6: Measured module operating current graph.

6. Troubleshooting

This section provides general troubleshooting tips. For specific issues, please refer to the technical support contact information.

  • **No Detection / Inaccurate Readings:**
    • Check power supply: Ensure stable 5V power with >300mA capacity.
    • Verify mounting: Ensure the module is firmly mounted and not shaking.
    • Clear line of sight: Confirm no obstructions in front of the antenna.
    • Back shielding: If objects are behind the radar, ensure a metal shield is used to prevent false detections.
    • Parameter configuration: Review detection distance, speed, and sensitivity settings via the mobile APP. Incorrect settings can lead to missed detections or false positives.
  • **Communication Issues (Serial Port/Bluetooth):**
    • Serial port settings: Confirm baud rate is 115200, 1 stop bit, no parity.
    • Bluetooth connection: Ensure the APP has necessary permissions and is connecting to the correct "LD2451_XXXX" device.
    • Wiring: Double-check RX/TX connections.
  • **Module Not Powering On:**
    • Check 5V power input: Ensure power is correctly applied to the VIN pin.
    • Ground connection: Verify GND is properly connected.

If issues persist, consider updating the firmware via the mobile APP (refer to section 4.3).

7. User Tips

Based on general usage of similar radar modules, here are some tips:

  • **Initial Setup:** Always start with default parameters and adjust gradually to your specific environment.
  • **Environmental Factors:** Performance can be affected by heavy rain, snow, or dense fog, although 24GHz radar is generally robust.
  • **Interference:** Be mindful of other 24GHz devices in close proximity that might cause interference.
  • **Firmware Updates:** Regularly check for firmware updates via the mobile APP to ensure optimal performance and access to new features.

Note: No specific user reviews or Q&A content was available to extract product-specific user tips.

8. Technical Support and Contacts

For technical assistance, inquiries, or further information regarding the HLK-LD2451 module, please contact Hi-Link Electronic Co., Ltd. using the details below:

  • Company: Shenzhen Hi-Link Electronic Co., Ltd.
  • Address: 17F, Building E, Xinghe WORLD, Minzhi Street, Long Hua district, Shenzhen 51813, China
  • Email: sales@hlktech.com
  • Website: www.hlktech.net

You may also refer to the official user manual PDF for additional details: HLK-LD2451 User Manual (PDF)

Video 1: Overview of Hi-Link 24G radar modules, showcasing various models and their features.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.