LS VISION LS-BC1

Contents

LS VISION 5MP Mini Battery Camera User Manual

Model: LS-BC1

1. Introduction

Thank you for choosing the LS VISION 5MP Mini Battery Camera (Model LS-BC1). This manual provides essential information for setting up, operating, maintaining, and troubleshooting your camera. Please read it carefully before use and keep it for future reference.

LS VISION 5MP Mini Battery Camera with key features

Figure 1: LS VISION 5MP Mini Battery Camera highlighting 5MP Ultra HD, 4G/WiFi connectivity, Humanoid Detection, Two-way Voice, and 3800mAh battery.

Package Contents

  • 1x Instruction Manual
  • 1x Battery Camera
  • 1x Type-C Charging Cable
  • 1x Bracket
  • 1x Screw Fittings
Unboxing contents of the LS VISION camera

Figure 2: Contents of the camera package including the camera, user guide, charging cable, bracket, and screws.

2. Setup Guide

2.1. APP Installation

  1. Scan the QR code below or search for 'UBox' in the App Store (for iOS devices) or Google Play Store (for Android smartphones) to download and install the app.
UBox App QR code for download

Figure 3: QR code for UBox App download.

2.2. APP Registration

  1. Open the app, input your E-mail address, then press 'Register'. Check and select to agree to the agreement. A verification email will be sent to your inbox.
  2. Set the login password and confirm it, then press 'Register' to proceed.
  3. A verification email will be sent to you. Go to your mailbox and click the link to complete the verification.
  4. Enter your E-mail address and password, then click login. The app will automatically fill in the account information.
  5. Input necessary information such as Country and Province, then press 'Done'.

2.3. Camera Connection (WiFi Version)

Comparison of 4G and WiFi camera versions

Figure 4: Two Options Comparison: 4G Camera Version (requires 4G data card, no WiFi) vs. 2.4G WiFi Camera Version (requires WiFi connection, no 4G).

  1. Press 'Add Family', then set the room or position as per reminders.
  2. Enter your family name and then press 'Next'.
  3. Press 'Add a device' to add a smart device.
  4. Connect the device with a power supply, and make sure your mobile phone is connected to an available Wi-Fi network. Then press 'Setup device'.
  5. After powering on the device, wait for the device's blue LED to blink, which means your device is in pairing mode. If the blue LED is not blinking, press the power/call key to wake up the device, then hold and press the RESET button. The device will reboot and enter the pairing state.
  6. The app will automatically input the Wi-Fi name. Please input the correct Wi-Fi Password. Then you can choose either QR code configuration or Soundwave configuration.
  7. For QR code configuration: Select the QR code configuration, then the mobile phone will display a QR code. Use the device to scan the QR code from about 10cm away from the mobile phone.
  8. The device will automatically enter the device list. Setup successful! The device is ready to use.

2.4. Camera Connection (4G Version)

  1. Press 'Add Family', then set the room or position as per reminders.
  2. Enter your family name and then press 'Next'.
  3. Insert the SIM card into the device, then put the battery into the device. Some models may require antenna installation.
  4. After powering on the device, wait for approximately 1 minute for the device's blue LED to light up, then press 'Next'. If the blue LED does not light up, refer to the troubleshooting section.
  5. The app will search for the device. This may take 5-50 seconds.
  6. Find the device's UID QR code and use the app to scan it.
  7. Select the name and device location, then press 'Done'.
  8. The device will automatically enter the device list. Setup successful! The device is ready to use.
App screenshot showing SIM card insertion instruction

Figure 5: App instruction for inserting the SIM card and powering on the device for 4G connection.

2.5. Physical Installation

The camera can be installed using the provided bracket and screws. It supports side, normal, or stick installation. Ensure the camera is placed in a location with good Wi-Fi or 4G signal strength, depending on your model.

Video 1: Product overview, unboxing, and demonstration of bracket installation.

3. Operating Instructions

3.1. Using the UBox App

The UBox app is your primary interface for controlling and monitoring your camera. Key functions include:

  • Preview Section: Enter to view live feed.
  • Push Notifications: Turn on/off alerts.
  • Settings: Access sharing options, cloud storage, smart device settings (PIR detection, environmental model, LED indicator, device ID, model, FW version).
  • Screenshot: Capture still images from the live feed.
  • Playback: Access recorded videos from Micro SD memory or cloud storage. Click the 'Calendar' icon on the right top corner, then choose the date to playback videos.
  • Microphone: Speak through the camera to the device side (two-way audio).

3.2. PIR Humanoid Detection Alarm

The camera features PIR (Passive Infrared) Humanoid Detection. When a moving object is detected, the camera starts recording and can send phone alarms. You can adjust the PIR detection sensitivity in the device settings:

  • Disabled: PIR detection is off.
  • Low: Reduces device wake-up frequency, saving battery power.
  • Medium: Standard detection.
  • High: Increased sensitivity for detection.
PIR Humanoid Detection Alarm illustration

Figure 6: Illustration of PIR Humanoid Detection Alarm triggering video storage, phone alarm, and human detection.

3.3. Two-way Audio

The camera includes a built-in microphone and Hi-Fi speakers, enabling two-way audio communication. You can speak through the app and hear audio from the camera's location.

Two-way Audio feature illustration

Figure 7: Illustration of the camera's two-way audio feature.

3.4. Day and Night Vision

The camera provides clear HD image quality during the daytime and automatically switches to infrared night vision in low-light conditions for continuous surveillance.

Daytime HD Image Quality vs Night Infrared Night Vision

Figure 8: Comparison showing clear daytime HD image quality and effective infrared night vision.

3.5. Storage Options

The camera supports both cloud storage and local storage via a TF (Micro SD) card. It offers one month of free cloud storage and face recognition services. After the trial period, value-added services can be purchased through the app.

Built-in battery and USB charging port

Figure 9: Diagram showing the 3800mAh built-in battery and USB charging port, along with storage capacity icons.

4. Maintenance

4.1. Battery Management

The device is equipped with rechargeable lithium batteries. Battery life is affected by monitoring frequency. In crowded environments, it is recommended to turn off the device or set PIR detection to 'Low' sensitivity to reduce device wake-up and extend battery life.

The camera is a delicate device with a low power consumption design. Each time the device is awakened, it will work for a few seconds, then enter standby mode to save power. You can set the work time in the app settings.

4.2. Connectivity

Place the device within the signal range of your Wi-Fi router. If there are thick or insulated objects between the device and the Wi-Fi router, this may cause weak Wi-Fi signals. Ensure the Wi-Fi signal is at a good level when using the device.

4.3. Cleaning

To clean the camera lens and body, use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the camera.

5. Troubleshooting

  • Camera not powering on or blue LED not lighting up: Ensure the battery is charged and correctly inserted. If the blue LED is not blinking (for WiFi) or not lit (for 4G) after powering on, press the power/call key to wake up the device, then hold and press the RESET button. The device will reboot and enter the pairing state.
  • Connectivity issues (WiFi): Ensure your mobile phone is connected to a 2.4GHz Wi-Fi network (5GHz is not supported). Verify the Wi-Fi password. Check the camera's proximity to the router and remove any obstructions.
  • Connectivity issues (4G): Ensure the SIM card is correctly inserted and activated with a data plan. Verify that your local 4G network bands are compatible with the camera. Some users have reported varying SIM card compatibility.
  • Poor audio quality (static/distortion): This may indicate a faulty unit or environmental interference. Try moving the camera to a different location or contacting support if the issue persists.
  • Recording issues: Ensure a compatible TF card is inserted and has sufficient free space, or that your cloud storage subscription is active. Some SD cards may not be compatible.
  • App not responding: Close and restart the UBox app. If the issue persists, try reinstalling the app.

6. Specifications

FeatureSpecification
Model NumberLS-BC1
Megapixels5 MP
High Definition5.0 Megapixels
Lens (mm)3.26 MM
Viewing Angle100°
IR Distance (m)10m
Video Compression FormatH.264, H.265
Connectivity4G (for 4G version), WiFi (for WiFi version)
Power Supply (V)5V 2A
Power ModeBattery Powered
Rechargeable BatteryBuilt-in 3800mAh
Operating Temperature-10°C to 60°C
SensorCMOS
AI FunctionsHuman Detection
Color Night VisionNo
App NameUBOX
Internal StorageSupports up to 128G TF Card (not included)
InstallationSide, Normal, Stick
Dimensions (L x W x D)40*40*58mm
Shell MaterialPlastic
CertificationCE, RoHS
Alarm TypeTelefon Alarm, Local Alarm
Supported Mobile SystemsAndroid, iOS
Applicable OccasionHome, Car, Warehouse, etc

7. Warranty and Support

For detailed warranty information, please refer to the product documentation provided at the time of purchase or contact your retailer. If you encounter any issues not covered in this manual, you can reach out to LS VISION customer service through the UBox app or your seller for assistance.

A comprehensive user manual in PDF format is available for further reference: View User Manual (PDF)

8. User Tips

  • SD Card Compatibility: Setting up the camera may take some time, and some SD cards might not be compatible. Ensure you use a high-quality, compatible Micro SD card for local storage. Verify the actual storage capacity of any purchased cards.
  • Audio Quality: While the camera features two-way audio, some users have noted that microphone and speaker quality can be limited, sometimes resulting in static or distortion. Manage expectations for audio performance.
  • Connectivity Choice: If you specifically require 4G connectivity for locations without Wi-Fi, ensure you purchase the 4G version and confirm SIM card compatibility with your local network provider. If Wi-Fi is available, the WiFi version is generally simpler to set up.
  • SIM Card Testing: If using the 4G version, test with different local SIM card providers if you encounter connectivity issues, as compatibility can vary.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.