1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your RACBOX 2.5 Inch Bi LED Headlight Projector Lenses. Please read this manual thoroughly before installation and use to ensure proper function and safety.
These LED headlight bulbs are auxiliary accessories designed for the normal replacement and upgrade of original car lights. They are not intended for illegal modification or unauthorized use. The products comply with relevant national automotive lighting industry standards and have undergone strict quality testing.
2. Specifications
| Feature | Detail |
|---|---|
| Product Type | LED 2.5 inch Headlight Projector Lens |
| Compatible Adapters | H4, H7, 9005, 9006 |
| Input Voltage | DC 12V-15V |
| Light Color | 6000K White |
| Beam Type | High Low Beam |
| Light Source | Top 3570 Big LED Chip (ET13570) |
| Luminous Flux | 10000LM/piece, 20000LM/pair |
| Lens Materials | Aluminum Housing, High Clear HD Glass |
| Shroud Materials | Plastic |
| Waterproof Rate | IP67 Grade |
| Working Temperature | -40°C to +85°C |
| Heat Dissipation | 12000RPM Fan, Metal Cooling Fins |
| Package Dimensions (approx.) | Length: 17 cm, Width: 13 cm, Height: 11 cm |
| Package Weight (approx.) | 0.92 kg |
3. Safety & Warnings
Important Safety Information:
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
4. Setup and Installation
Professional installation is highly recommended for this product.
4.1 Pre-Installation Checks
- Ensure the vehicle's engine is turned off.
- Verify that the original lamp is cool to the touch before handling.
- Confirm the light size and lighting mode are compatible with your vehicle before proceeding with installation.
- Determine if your vehicle is Left-Hand Drive (LHD) or Right-Hand Drive (RHD) to select the correct projector lens type if applicable. LHD vehicles (e.g., Russia, USA, Germany) have the steering wheel on the left. RHD vehicles (e.g., UK, AU, Japan) have the steering wheel on the right.
4.2 Installation Steps
- Disconnect the power connector of the original bulb.
- Remove the factory halogen bulb from the headlight housing.
- Install the LED bulb into the headlight housing. Use the appropriate adapter (H4, H7, 9005/9006) and silicone spacer as needed to secure the bulb.
- Connect the LED driver and fix it properly, ensuring it is securely mounted and not interfering with other components.
- Reconnect the power to the headlight assembly.
- Test the light function (low beam and high beam).
- Reassemble the headlight assembly, ensuring all covers and seals are correctly in place.
Note: If the light does not turn on after installation, please reverse the plug polarity and retest.
4.3 Wiring Connection
Ensure correct wiring for proper high and low beam functionality.
5. Operating Instructions
Once installed, the Bi LED Headlight Projector Lenses operate like standard vehicle headlights, providing both low beam and high beam functionality.
- Low Beam: Provides a wide, flat light pattern suitable for general driving and preventing glare to oncoming traffic.
- High Beam: Provides a more focused and intense light pattern for maximum visibility when driving in dark conditions without oncoming traffic.
6. Maintenance
To ensure optimal performance and longevity of your Bi LED Headlight Projector Lenses, follow these general maintenance guidelines:
- Cleaning: Regularly clean the outer lens surface with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners that could scratch the lens.
- Inspection: Periodically inspect the wiring connections and mounting for any signs of wear, damage, or looseness.
- Cooling System: Ensure the cooling fan and fins are free from obstructions to maintain efficient heat dissipation.
- Avoid Harsh Conditions: While rated IP67 waterproof, prolonged exposure to extreme conditions or direct high-pressure water jets should be avoided.
7. Troubleshooting
- Light does not turn on: If the LED headlight does not illuminate after installation, first check all wiring connections for proper seating. If connections are secure, try reversing the plug polarity. LED lights are polarity sensitive, and incorrect polarity will prevent them from lighting up.
- Flickering or intermittent light: Check for loose connections in the wiring harness or at the LED driver. Ensure the vehicle's electrical system is providing stable voltage (DC 12V-15V).
- Dim light output: Verify that the lens surface is clean. Ensure the cooling system (fan and fins) is not obstructed, as overheating can reduce light output.
- Difficulty with installation: If you encounter significant difficulties during installation, it is highly recommended to seek assistance from a qualified automotive professional.
8. User Tips
- Wiring Clarity: Pay close attention to the wiring diagram provided, especially for the 4 cables (High beam Positive, High beam Negative, Low beam positive, Negative) to ensure correct functionality. Refer to the 'Wiring Connection' diagram in Section 4.3.
- Professional Installation: While DIY installation is possible for experienced individuals, professional installation is strongly advised to prevent potential issues and ensure optimal performance.
- Compatibility Check: Always double-check the dimensions and compatibility with your vehicle's headlight housing before purchasing and attempting installation.
9. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the manufacturer or authorized representative:
- Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No. 1489, Fanghua Road Baiyun Guangzhou
- EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND
- Email: info@apex-ce.com
For a digital copy of this user manual, please refer to the official product page or download the PDF document: User Manual (PDF)