1. Safety Information
- Do not use for live working to prevent electric shock.
- The module's metal casing may become warm during operation; handle with care.
- Keep fingers away from the electrical contacts during insertion or removal.
2. Setup and Installation
The ZoeRax SFP+ to RJ45 Copper Module is designed for easy plug-and-play installation without requiring additional software or complex configuration.
2.1. Package Contents Inspection
- Upon receipt, carefully inspect the SFP+ to RJ45 Copper Module for any physical damage.
- Ensure the module matches the ordered speed variant (1.25G, 2.5G, or 10G).
2.2. Compatibility
This module is widely compatible with various network devices that feature SFP or SFP+ optical ports. It supports major brands including Cisco, Ubiquiti, QNAP, Zyxel, D-Link, Netgear, Fortinet, TP-Link, Brocade, Broadcom, and MikroTik.

Figure 1: Wide Compatibility with Major Network Brands
2.3. Installation Steps
- Ensure your network device (switch, router, firewall) is powered off or the SFP/SFP+ port is disabled, if possible, to prevent accidental damage.
- Carefully insert the ZoeRax SFP+ to RJ45 Copper Module into an available SFP or SFP+ port on your network device until it clicks into place.
- Connect a standard RJ45 Ethernet cable (e.g., Cat5e, Cat6, Cat7 depending on speed requirements) from your network device to the RJ45 port on the SFP module.
- Power on your network device. The module should be automatically detected and configured.

Figure 2: Plug-and-Play Installation
Video 1: ZoeRax SFP Module Product Overview and Installation Demonstration
3. Operating Instructions
Once installed, the module will establish a link with the connected device. The module supports Digital Diagnostics Monitoring (DDM) for real-time monitoring of its operating parameters.
3.1. Speed Negotiation
The module is designed to auto-negotiate the speed with the connected device. It supports 1.25Gbps, 2.5Gbps, and 10Gbps depending on the specific module variant purchased.

Figure 3: ZoeRax SFP-RJ45 Module Speed Capabilities
4. Maintenance and Care
The ZoeRax SFP+ to RJ45 Copper Module is built with durable components for long-term reliability.
4.1. General Precautions
- Avoid exposing the module to extreme temperatures or humidity outside its specified operating range (0 to 70°C).
- Keep the module clean and free from dust. Use a soft, dry cloth for cleaning if necessary.
- Avoid physical shock or dropping the module, as this can damage internal components.

Figure 4: Designed for Rugged Environments (0°C to 70°C)
5. Troubleshooting
5.1. Common Issues and Solutions
- No Link Light / Unstable Network Connection:
- Ensure the module is fully seated in the SFP/SFP+ port.
- Check the RJ45 Ethernet cable for proper connection and integrity.
- Try restarting your router or network switch.
- Verify that the connected device's port is enabled and configured correctly.
- Speed Mismatch / Incorrect Speed:
- If auto-negotiation fails, try manually setting the port speed on your network device to match the module's capability (e.g., 2.5G Base-T).
- Ensure your Ethernet cable supports the desired speed (e.g., Cat6 for 10G up to 30m, Cat5e for 2.5G up to 100m).
- Abnormal Functionality:
- If the module exhibits unexpected behavior, try it in a different SFP/SFP+ port or with another compatible network device to isolate the issue.
- Contact customer support for further assistance.
6. Specifications
The ZoeRax SFP+ to RJ45 Copper Module is built with high-quality chips, thick gold fingers for enhanced corrosion resistance, and a durable zinc metallic casing for effective heat dissipation and reduced interference.

Figure 5: Product Features and Internal Components
6.1. General Specifications
- Brand Name: ZoeRax
- Model Number: SFP-10/2.5G/1.25GBASE-T
- Interface: RJ45
- Form Type: SFP / SFP+
- Protocols: MSA Compliant
- Temperature Range: 0 to 70°C (32 to 158°F)
- Size: Approximately 13.7 mm x 13.4 mm x 68.8 mm
- Certification: CE, RoHS, WEEE
6.2. Variant-Specific Specifications
| Parameter | Details |
|---|---|
| Product | SFP-1.25GBASE-T |
| Data Rate | 1.25Gbps (10/100/1000M) |
| Cable Distance | Up to 100 m |

| Parameter | Details |
|---|---|
| Product | SFP-2.5GBASE-T |
| Data Rate | 2.5Gbps |
| Cable Distance | Up to 100 m |

| Parameter | Details |
|---|---|
| Product | SFP+-10GBASE-T |
| Data Rate | 10/2.5/1.25Gbps |
| Cable Distance | Up to 30 m |

7. User Tips
- Heat Management: SFP modules, especially 10G copper modules, can run warm. This is normal. Some users apply small heatsinks to further reduce operating temperature, which can be beneficial in enclosed spaces.
- Manual Speed Setting: If you experience issues with auto-negotiation, particularly with 2.5G modules, try manually setting the port speed on your network switch or router to the desired rate (e.g., 2.5G Base-T).
- Device Compatibility: Users have reported successful operation with devices like Mikrotik Hex S, Asus QG-U1080 switch, Banana Pi R3, Unifi Dream Router 7 (for ONT connection), QNAP SFP+, and D-Link DGS-1510-28P.
8. Warranty and Support
ZoeRax stands by the quality of its products.
- Warranty: This product comes with a 12-month warranty.
- After-Sales Service: ZoeRax provides 3-year after-sales service for this module.
- Support: For any abnormal functionality, technical inquiries, or warranty claims, please contact ZoeRax customer support.

Figure 6: Quality Assurance and After-Sales Service