tedeligo 2202RF+KT15272A

Contents

Tedeligo 433Mhz Universal Wireless Remote Control Relay Module

Model: 2202RF+KT15272A

Brand: tedeligo

1. Product Overview

The Tedeligo 433Mhz Universal Wireless Remote Control Relay Module is designed for versatile control of various AC and DC devices. It consists of a 2-channel receiver module and an AB transmitter remote control, operating on a 433MHz RF frequency. This system allows for remote operation of devices in multiple modes, offering flexibility for different applications.

Key Applications:

  • Doors & Gates: Garage doors, electric doors, house doors, shutter doors, expansion doors, gate doors, road gates.
  • Lighting: Lamps, LED lights, stage lighting.
  • Motors: Motor positive and negative rotation, motor switches, fans, water pumps.
  • Other Devices: Electric curtains, ventilation devices, signal transmission, DIY projects.
Tedeligo 433Mhz Universal Wireless Remote Control Relay Module with two remotes
Product overview showing the receiver module and two remote controls, highlighting power options (AC 90-250V, USB 5V).
Various application scenarios for the remote control system
Illustrations of various application scenarios including gates, doors, and lighting.

2. Specifications

2.1. Relay Receiver Board Parameters

Feature Specification
Working Voltage AC 90V-250V or USB Type-C 5V-0.5A
Input/Output Voltage 1V-250V
Quiescent Current <5mA
Max Current 10A
Max Load 2200W
RF Frequency 433MHz
Pin Configuration NO / COM / NC
Working Temperature -30°C to +80°C
Receiving Sensitivity >97dbm
Storage Remote Controls Up to 20 pieces
Support Encoding 1527 Learning code / 2262 Fixed code
RF Operating Mode ASK superheterodyne wireless reception
Receiving Range Up to 100m (in open space)
Remote Operating Modes Momentary, Toggle, Latched, Mix Mode, Motor Toggle Mode

2.2. Remote Control Parameters

Feature Specification
RF Frequency 433MHz
Support Encoding 1527 Learning code
Transmitting Range Up to 1000m (theoretical distance)
Battery 27A 12V*1 (included)

3. Setup and Operating Modes

Important: Signal pairing is required before first use or after a reset.

3.1. Momentary Mode

Operation: The relay is active only while the remote button is pressed.

  1. Press and hold button "A" on the remote: Relay "1" will turn on.
  2. Release button "A": Relay "1" will turn off.

Setup:

  1. Press the learning button on the receiver 1 time.
  2. Wait for 3 seconds.
  3. Press button "A" on the remote control.
  4. Wait for 3 seconds.
  5. Press button "B" on the remote control. Pairing is successful.

3.2. Toggle Mode

Operation: Each press of the remote button toggles the relay state (on/off).

  1. Press button "A" on the remote: Relay "1" will turn on.
  2. Press button "A" again: Relay "1" will turn off.

Setup:

  1. Press the learning button on the receiver 2 times.
  2. Wait for 3 seconds.
  3. Press button "A" on the remote control.
  4. Wait for 3 seconds.
  5. Press button "B" on the remote control. Pairing is successful.

3.3. Latched Mode

Operation: Pressing one button turns on a relay and turns off another. Requires at least 3 buttons on the remote.

  1. Press button "A" on the remote: Relay "1" will turn on.
  2. Press button "B" on the remote: Relay "2" will turn on, and simultaneously, Relay "1" will turn off.

Setup:

  1. Press the learning button on the receiver 3 times.
  2. Wait for 3 seconds.
  3. Press button "A" on the remote control.
  4. Wait for 3 seconds.
  5. Press button "B" on the remote control. Pairing is successful.

3.4. Mix Mode

Operation: Combines momentary and toggle actions for different relays.

  1. Press and hold button "A": Relay "1" will turn on. Release button "A": Relay "1" will turn off.
  2. Press button "B": Relay "2" will turn on. Press button "B" again: Relay "2" will turn off.

Setup:

  1. Press the learning button on the receiver 4 times.
  2. Press button "A" on the remote control 1 time.
  3. Press button "B" on the remote control 1 time. Pairing is successful.

3.5. Motor Toggle Mode

Operation: Designed for motor control, ensuring only one direction is active at a time.

  1. Press button "A": Relay "1" turns on. Press button "B": Relay "2" turns on, Relay "1" turns off. Press button "B" again: Relay "2" turns off.
  2. Alternatively, press button "B": Relay "2" turns on. Press button "A": Relay "1" turns on, Relay "2" turns off. Press button "A" again: Relay "1" turns off.

Setup:

  1. Press the learning button on the receiver 5 times.
  2. Press button "A" on the remote control 1 time.
  3. Press button "B" on the remote control 1 time. Pairing is successful.

3.6. Resetting the Receiver

To clear all paired remote controls and reset the receiver to its default state:

  1. Press the learning button on the receiver 8 times.
  2. All previously paired remote controls will no longer function and will need to be re-paired.

4. Wiring Diagrams

The following diagrams illustrate common wiring configurations for the receiver module with various devices. Ensure all connections are made correctly and safely according to local electrical codes.

Comprehensive wiring diagrams for AC Motor, AC Device, DC Motor, and USB power
Detailed wiring diagrams for different applications: AC Motor, AC Device, DC Motor, and 1V-250V/USB 5V-0.5A power input.
  • AC Motor: Shows connections for controlling an AC motor with Up/Down functionality.
  • AC Device: Illustrates wiring for a standard AC device, such as a light.
  • DC Motor: Provides connections for controlling a DC motor (e.g., 12V, 24V, 36V).
  • 1V-250V / USB 5V-0.5A: Demonstrates wiring for devices powered by 1V-250V and the option to power the receiver via USB Type-C 5V-0.5A.

5. Maintenance

  • Remote Battery Replacement: Replace the 27A 12V battery in the remote control promptly when its voltage is low to ensure consistent and strong signal transmission.
  • Antenna Adjustment: For optimal signal reception, slightly stretch the antenna on the receiver module.

6. Troubleshooting

  • Remote Control Not Responding: If the remote control is not working, ensure it has been properly paired with the receiver. If the operating mode was recently changed, a reset and re-pairing might be necessary.
  • After Reset: Remember that performing a reset on the receiver will clear all paired remote controls. You will need to re-pair them according to the instructions for your desired operating mode.
  • Weak Signal: If you experience weak or inconsistent signal reception, check the remote control's battery level and replace it if low. Also, ensure the receiver's antenna is slightly stretched and unobstructed.
  • Latched Mode Issues: For Latched mode functionality, ensure your remote control has at least three buttons. Remotes with fewer buttons may not support this mode correctly.
  • Initial Setup: Always ensure signal pairing is completed before attempting to use the system for the first time.

7. User Tips

  • Mode Changes: Always perform a full reset of the receiver before attempting to change the operating mode of a remote control to avoid unexpected behavior.
  • Battery Life: Keep a spare 27A 12V battery for your remote control. A fresh battery ensures maximum transmitting range and reliability.
  • Antenna Positioning: Experiment with the receiver's antenna position to find the best signal reception, especially in environments with obstacles.
  • Remote Button Count: If you plan to use the Latched mode, verify that your remote control has at least three distinct buttons for proper configuration.

8. Warranty and Support

For further assistance or inquiries, please contact the manufacturer directly:

  • Manufacturer: Huizhou Wenqiao Electronic Technology Co., Ltd.
  • Address: Room 03, 12th Floor, Building 119, East Coast Garden, Fangzhilonghuwan, No. 27, Sanhuan South Road, Huicheng District, Huizhou City, Guangdong Province, China 516001
  • WhatsApp: +86 181 3880 5271 / +86 135 0227 8583
  • Email: dieseelectronic@163.com

A detailed user manual in PDF format is also available for download. Please refer to the seller's product page for the direct link to the PDF document.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.