Dooya DM45RM 50/12

Contents

Dooya DM45RM 50/12 Tubular Motor

Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Dooya DM45RM 50/12 Tubular Motor. This motor is designed for electric rolling shutters, awnings, and sunshades, offering both manual control and RF433 remote control capabilities. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

Note: This manual is specifically for the DM45RM 50/12 Short Axis model. Differences may exist with other Dooya models like DM45RD.

2. Safety Information

  • Ensure all electrical connections are made by a qualified electrician and comply with local regulations.
  • Disconnect power before performing any installation, maintenance, or repair work.
  • Do not allow children to play with the motor or remote control.
  • Keep hands and loose clothing clear of moving parts during operation.
  • Do not operate the motor if it is damaged or malfunctioning.
  • Ensure the motor is correctly installed and secured to prevent accidents.

3. Package Contents

Please check that all items are present in your package:

  • Dooya DM45RM 50/12 Tubular Motor (Short Axis)
  • Power Cable
  • DC2760AM 2-Channel Remote Controller
  • Mounting Bracket
  • Drive Adapter (specific to your tube size)
  • Limit Adjustment Tool
  • Screws and Fasteners
Contents of the Dooya DM45RM 50/12 package
Figure 1: Contents of the Dooya DM45RM 50/12 package, including the motor, power cable, remote, mounting bracket, drive adapter, and fasteners.

4. Specifications

FeatureSpecification
Model NumberDM45RM 50/12 Short Axis
Product NameDooya Electric Tubular Motor
Torque50 Nm
Rolling Speed12 rpm
Power Supply220V/230V (Voltage range: 110-240V)
Frequency50/60Hz (RF: 433.92MHz)
Input Wattage205 W (Wattage: 8W)
Current0.89 A
Capacitor7µF/450V
Weight3.22 kg
Duty CycleS2 4min
IP RatingIP44
Insulation ClassH
Motor DiameterΦ45
Axis LengthApprox. 10mm (Short Axis Version)
Control MethodManual + Dooya RF433 Remote
CertificationCE
OriginMainland China
Product label for DM45RM-50/12 with detailed specifications and wiring diagram
Figure 2: Product label for DM45RM-50/12, detailing specifications and a wiring diagram.

5. Setup and Installation

5.1 Crown Installation

  1. Slide the crown onto the motor shaft.
  2. Ensure it is seated correctly and securely.
  3. Do not drill through the crown or inner gear wheel.
Dooya DM45RM 50/12 Tubular Motor, showing the short axis and included remote control
Figure 3: Dooya DM45RM 50/12 Tubular Motor, showing the short axis (AB=10mm) and included remote control.

5.2 Drive Adapter Installation

Select the appropriate drive adapter for your tube size (e.g., 55mm, 60mm, 63mm, 70mm, 80mm, 85mm, 90mm). Examples of drive adapters:

  • Drive adapter for 55mm Groove Tube
    55mm Groove Tube
  • Drive adapter for 60mm Octagonal Tube
    60mm Octagonal Tube
  • Drive adapter for 60mm Groove Tube
    60mm Groove Tube
  • Drive adapter for 63mm Groove Tube
    63mm Groove Tube
  • Drive adapter for 70mm Groove Tube
    70mm Groove Tube
  • Drive adapter for 80mm Round Tube (green)
    80mm Round Tube
  • Drive adapter for 85mm Groove Tube
    85mm Groove Tube
  • Drive adapter for 90mm Groove Tube
    90mm Groove Tube
  1. Attach the drive adapter to the motor.
  2. Ensure the adapter fits snugly into the tube.
  3. Use rivets or screws to install the drive adapter if necessary.
Rear view of the Dooya DM45RM 50/12 motor end, showing mounting plate
Figure 4: Rear view of the Dooya DM45RM 50/12 motor end, showing mounting plate.

5.3 Bracket Installation

  1. Securely mount the bracket to the desired surface.
  2. Attach the motor to the bracket, ensuring it is firmly held.
Image showing the motor installed correctly with a bracket (OK) versus an incorrect installation (NO)
Figure 5: Correct (OK) and incorrect (NO) motor installation with a bracket.

5.4 Circuit Installation (Wiring Diagram)

Connect the motor to the AC power supply according to the following diagram. Ensure power is off before wiring.

  • For 230V/50Hz (3x1.5mm²):
    • Blue = Neutral
    • Brown = Direction
    • Green/Yellow = Earth
  • For 120V/60Hz (3x18AWG):
    • White = Neutral
    • Black = Direction
    • Green = Earth
Wiring diagram on product label
Figure 6: Wiring diagram as shown on the product label.

5.5 Programming the Remote Control (First Transmitter)

Follow these steps to pair your DC2760AM 2-Channel Remote Controller with the motor:

  1. Power On: Turn on the power switch. The motor will emit a long beep.
  2. Enter Pairing Mode:
    • Press the P2 button on the back of the remote control once. The motor will rotate back and forth once.
    • Press the P2 button again. The motor will rotate back and forth once more.
  3. Confirm Pairing: Press the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.