1. Introduction
Get a deeper understanding of your body, your health, and your progress with Fitbit Charge 3. This manual provides comprehensive instructions on how to set up, operate, and maintain your device.
The Fitbit Charge 3 is not intended to provide medical or scientific data.
2. What's in the Box
Your Fitbit Charge 3 package includes:
- Tracker with small band (color and material may vary)
- Charging cable
- Additional large band (color and material may vary)
The detachable bands on Charge 3 come in a variety of colors and materials, sold separately.

3. Setup
3.1. Charge Your Tracker
A fully-charged Charge 3 has a battery life of up to 7 days. Battery life and charge cycles vary with use and other factors.
- Plug the charging cable into a USB port on your computer, a UL-certified USB wall charger, or another low-energy charging device.
- Clip the other end of the charging cable to the port on the back of Charge 3. The pins on the charging clip must lock securely with the gold contacts on the back of the tracker. Charge 3 vibrates, and a battery icon appears on the screen.

Charging fully takes about 1-2 hours. While charging, you can press the buttons to check the battery level. A fully-charged tracker shows a solid battery icon with a smile.
3.2. Set Up with Your Phone
Set up Charge 3 with the Fitbit app for iPhones and iPads or Android phones. The Fitbit app is compatible with most popular phones.
- Download the Fitbit app from the Apple App Store (for iPhones) or Google Play Store (for Android phones).
- Install the app and open it.
- Tap 'Sign in with Google' and follow the on-screen instructions to set up your device.
After setup, open the Fitbit app on your phone to see your health metrics, activity and sleep data, choose a workout or mindfulness session, and more.
3.3. Wear Charge 3
Wear Charge 3 around your wrist. If you need to attach a different size band, or if you purchased another band, see the instructions in section 3.4.
Placement for All-Day Wear vs. Exercise
When not exercising, wear Charge 3 a finger's width above your wrist bone.
It's important to give your wrist a break regularly by removing your tracker for about an hour after extended wear. We recommend removing your tracker while showering to reduce exposure to soaps, shampoos, and conditioners, which can cause long-term damage or skin irritation.
For optimized heart-rate tracking while exercising:
- Experiment with wearing your tracker a bit higher on your wrist for an improved fit. Many exercises, such as bike riding or weight lifting, can interfere with heart-rate signal if the tracker is too low.
- Wear your tracker on top of your wrist, ensuring the back of the device is in contact with your skin.
- Consider tightening your band before a workout and loosening it afterwards. The band should be snug but not constricting, as a tight band restricts blood flow and can affect the heart-rate signal.
Handedness
For greater accuracy, specify whether you wear Charge 3 on your dominant or non-dominant hand. Your dominant hand is the one you use for writing and eating. By default, the Wrist setting is non-dominant. To change this, in the Fitbit app, go to the Today tab, tap the icon in the top left, then 'Charge 3 tile' > 'Wrist' > 'Dominant'.
Wear and Care Tips
- Clean your band and wrist regularly with a soap-free cleanser.
- If your tracker gets wet, remove and dry it completely after your activity.
- Take your tracker off from time to time.
3.4. Change the Band
Charge 3 comes with a small band attached and an additional large, bottom band in the box. Both the top and bottom bands can be swapped with accessory bands.
Remove a Band
- Turn over Charge 3 and find the band latches.
- To release the latch, press down on the flat button on the band.
- Gently pull the band away from the tracker to release it.
- Repeat on the other side.
Attach a New Band
To attach a new band, press it into the end of the tracker until you feel it snap into place. If you have trouble attaching the band or if it feels loose, gently move the band back and forth to make sure it's attached securely.
4. Operating Your Fitbit Charge 3
4.1. Basics
Charge 3 has an OLED touchscreen display and one button. Navigate by tapping the screen, swiping side to side and up and down, or pressing the button. To preserve battery, the screen turns off when not in use.
Basic Navigation
The home screen is the clock.
- Swipe down to see notifications.
- Swipe up to see your daily stats.
- Swipe left to see the apps on your tracker.
- Press the button to go back to a previous screen or return to the clock face.

Quick Settings
Press and hold the button and swipe left on Charge 3 for faster access to certain settings. Tap a setting to turn it on or off. When off, the icon appears dim with a line through it.
| Setting | Description |
|---|---|
| DND (Do not disturb) | Mutes notifications, goal celebrations, and reminders. The DND icon illuminates in quick settings. You cannot use DND and Sleep Mode simultaneously. |
| Sleep Mode | Mutes notifications and reminders, dims the screen brightness, and keeps the screen dark when you turn your wrist. Sleep mode turns off automatically based on your schedule. You cannot use DND and Sleep Mode simultaneously. |
| Screen Wake | When enabled, turning your wrist towards you will turn on the screen. |
| Brightness | Adjust the screen's brightness. |
| Do Not Disturb | Turn off all notifications or automatically turn on DND during exercise. |
| Heart Rate | Turn heart-rate tracking on or off. |
| Screen Timeout | Choose how long the screen stays on after you stop interacting with your tracker. |
| Vibrations | Adjust your tracker's vibration strength. |
Check Battery Level
From the clock face, swipe up. The battery level is at the top of the screen.
4.2. Change the Clock Face
The Fitbit Gallery offers a variety of clock faces to personalize your tracker.
- From the Today tab in the Fitbit app, tap the icon in the top left > Charge 3 tile.
- Tap 'Gallery' > 'Clocks' tab.
- Browse available clock faces. Tap a clock face for a detailed view.
- Tap 'Install' to add the clock face to Charge 3.
4.3. Notifications from Your Phone
Charge 3 can show call, text, calendar, and app notifications. Keep your tracker within 30 feet of your phone to receive notifications.
Set Up Notifications
Ensure Bluetooth is on and your phone can receive notifications.
- From the Today tab in the Fitbit app, tap the icon in the top left > Charge 3 tile.
- Tap 'Notifications'.
- Follow on-screen instructions to pair your tracker if not already done. Call, text, and calendar notifications are turned on automatically.
- To turn on notifications from other apps, tap 'App Notifications' and select the desired apps.
Note: iPhone users see notifications from all calendars synced to the Calendar app. Android users see notifications from the chosen calendar app during setup.
See Incoming Notifications
A notification causes your tracker to vibrate. If you miss it, swipe down from the top of the screen to check it later.
Manage Notifications
Charge 3 stores up to 10 notifications. Older ones are replaced as new ones arrive.
- Swipe down from the top of the screen to see notifications and tap to expand.
- To delete a notification, expand it, swipe to the bottom, and tap 'Clear'.
- To delete all notifications, swipe to the top and tap 'Clear All'.
Turn Off Notifications
Turn off specific notifications in the Fitbit app, or all notifications in quick settings on Charge 3. If all are off, your tracker won't vibrate or light up for notifications.
To turn off certain notifications:
- From the Today tab in the Fitbit app, tap the icon in the top left > Charge 3 tile > 'Notifications'.
- Turn off the notifications you no longer want.
To turn off all notifications: Press and hold the button on your tracker and swipe left to quick settings. Tap DND to turn it on. The DND icon will illuminate.
If you use DND on your phone, you won't receive notifications on your tracker until you turn it off on your phone.
Answer or Reject Phone Calls
If paired with an iPhone or Android phone, Charge 3 allows you to accept or reject incoming calls. Older Android OS versions only allow rejection.
- To accept a call, tap the check mark on your tracker's screen. (You cannot speak into the tracker; accepting answers the call on your phone).
- To reject a call, tap the 'X' icon on your tracker's screen.
Respond to Messages (Android Phones Only)
If paired with an Android phone, Charge 3 lets you respond directly to text messages and notifications from certain apps with preset quick replies.
To respond to a message:
- Open the notification.
- Tap 'Reply'. (If no reply option, replies are not available for that app).
- Choose a text reply from the list or tap the emoji icon to choose an emoji.
4.4. Timekeeping
Alarms vibrate to wake or alert you. Set up to 8 alarms for one-time or recurring days. You can also time events with the stopwatch or set a countdown timer.
Set an Alarm
Set one-time or recurring alarms with the Alarms app. When an alarm goes off, your tracker vibrates.
When setting an alarm, turn on Smart Wake. This allows your tracker to find the best time to wake you, starting 30 minutes before your set alarm time. It avoids waking you during deep sleep, helping you feel refreshed. If Smart Wake can't find a good time, it will alert you at the set time.
Use the Timer or Stopwatch
Time events with the stopwatch or set a countdown timer using the Timers app on your tracker. You can run both simultaneously.
4.5. Activity and Wellness
Charge 3 continuously tracks various stats and automatically syncs with the Fitbit app.
See Your Stats
Swipe up from the clock face to see daily stats:
| Stat Category | Description |
|---|---|
| Core stats | Steps taken today, distance covered, floors climbed, calories burned, and active minutes. |
| Exercise | Number of days you met your exercise goal this week. |
| Heart rate | Current heart rate and heart-rate zone, and resting heart rate. |
| Hourly steps | Steps taken this hour, and the number of hours you met your hourly activity goal. |
| Cycle track | Information on the current stage of your menstrual cycle, if applicable. |
| Sleep | Sleep duration and sleep score. |
Find your complete history and other information in the Fitbit app.
Track a Daily Activity Goal
Charge 3 tracks your progress toward a daily activity goal. When you reach your goal, your tracker vibrates and shows a celebration. The default goal is 10,000 steps per day, which can be customized.
Track Your Hourly Activity
Charge 3 helps you stay active by tracking stationary periods and reminding you to move. Reminders nudge you to walk at least 250 steps each hour. You'll feel a vibration and see a reminder 10 minutes before the hour if you haven't met the goal. Meeting the goal after a reminder triggers a second vibration and a congratulatory message.
Track Your Sleep
Wear Charge 3 to bed to automatically track basic sleep stats, including time asleep, sleep stages (REM, light, deep sleep), and sleep score (quality of sleep).

Charge 3 also tracks estimated oxygen variation and skin temperature throughout the night. To see sleep stats, sync your tracker and check the Fitbit app or swipe up from the clock face.
Set a Sleep Goal
The default sleep goal is 8 hours per night. Customize this goal in the Fitbit app.
Learn About Your Sleep Habits
With a Fitbit Premium subscription, you can access more details about your sleep score and compare your habits with peers to improve your sleep routine.
See Your Heart Rate
Charge 3 tracks your heart rate throughout the day. Swipe up from the clock screen to see your real-time heart rate and heart-rate zone. During a workout, Charge 3 shows your heart-rate zone to help target training intensity.
Practice Guided Breathing
The Relax app on Charge 3 provides personalized guided breathing sessions. All notifications are disabled during the session.
- On Charge 3, open the Relax app.
- The 2-minute session is the first option. Swipe left for the 5-minute session.
- Tap the play icon to start and follow on-screen instructions.
After the session, a summary shows your alignment, heart rate at start/end, and how many days you completed a session this week.
4.6. Exercise and Heart Health
Track Your Exercise Automatically
Charge 3 automatically recognizes and records high-movement activities lasting at least 15 minutes. See basic stats about your activity in the Fitbit app on your phone.
Track and Analyze Exercise with the Exercise App
Track specific exercises with the Exercise app on Charge 3 to see real-time stats, including heart-rate data, calories burned, elapsed time, and a post-workout summary. For complete workout stats and intensity map (if GPS was used), tap the Exercise tile in the Fitbit app.
GPS Requirements
Charge 3 uses the GPS sensors on your nearby phone to capture GPS data.
- Turn on Bluetooth and GPS on your phone.
- Ensure Charge 3 is paired to your phone.
- Ensure the Fitbit app has permission to use GPS or location services.
To track an exercise:
- On Charge 3, open the Exercise app and swipe up to find an exercise.
- Tap the exercise to choose it.
- Tap 'Start' or 'Set Goal'. If setting a goal, press the button to go back and tap 'Start'.
- Tap the play icon to begin. If GPS is used, you can wait for the signal to connect or start the exercise and GPS will connect when available. GPS may take a few minutes to connect.
- Tap the middle of the screen to scroll through real-time stats.
- When done or pausing, press the buttons.
- To end the workout, press the buttons again and tap 'Finish'. Swipe up to see your workout summary. Tap the check mark to close.
- To see GPS data, tap the Exercise tile in the Fitbit app.
Notes:
- If you set an exercise goal, your tracker alerts you at halfway and when you reach the goal.
- If GPS is used, an icon appears in the top left as your tracker connects to your phone's GPS sensors. When the screen says "connected" and Charge 3 vibrates, GPS is connected.
Customize Exercise Settings and Shortcuts
Customize settings for each exercise type and reorder shortcuts in the Fitbit app. For example, turn connected GPS and cues on/off or add a yoga shortcut.
To customize an exercise setting:
- From the Today tab in the Fitbit app, tap the icon in the top left > Charge 3 tile > 'Exercise Shortcuts'.
- Tap an exercise and adjust settings.
Check Your Workout Summary
After a workout, Charge 3 shows a summary of your stats. Check the Exercise tile in the Fitbit app for additional stats and a workout intensity map if GPS was used.
Check Your Heart Rate
Heart-rate zones help target training intensity. See your current zone and progress toward your maximum heart rate on your device. In the Fitbit app, see time spent in zones. Three zones (Fat Burn, Cardio, Peak) are based on American Heart Association recommendations, or you can create a custom zone.
Charge 3 personalizes heart-rate zones using your heart rate reserve. It notifies you when you enter a heart-rate zone.
Default Heart-Rate Zones
Default heart-rate zones are calculated using your estimated maximum heart rate (220 minus your age).
| Zone | Calculation | Description |
|---|---|---|
| Below Zone | Below 50% of your maximum heart rate | Your heart beats at a slower pace. |
| Fat Burn Zone | Between 50% and 69% of your maximum heart rate | Moderate activity, such as a brisk walk. Heart rate and breathing might be elevated, but you can still converse. |
| Cardio Zone | Between 70% and 84% of your maximum heart rate | Vigorous activity, such as running or spinning. |
| Peak Zone | Greater than 85% of your maximum heart rate | Short, intense activity that improves performance and speed, such as sprinting or high-intensity interval training. |
Custom Heart-Rate Zones
You can create a custom heart-rate zone in the Fitbit app to target a specific heart-rate range.
Share Your Activity
After a workout, open the Fitbit app to share your stats with friends and family.
4.7. Contactless Payments (Special Editions Only)
Some Charge 3 editions include a built-in NFC chip for contactless payments. To check if your Charge 3 supports Fitbit Pay, remove the bottom band and look for "Fitbit Pay" printed on the end of the tracker.
Use Credit and Debit Cards
Set up Fitbit Pay in the Fitbit app to make purchases in stores that accept contactless payments. Check fitbit.com/fitbit-pay/banks to see if your payment card works.
Set Up Contactless Payments
To use contactless payments, add at least one credit or debit card from a participating bank to the Fitbit app. The app is where you add/remove cards, set a default card, edit payment methods, and review purchases.
- From the Today tab in the Fitbit app, tap the icon in the top left > Charge 3 tile.
- Tap the 'Wallet' tile.
- Follow on-screen instructions to add a payment card. You may need additional verification or to set a 4-digit PIN code for your tracker. Ensure passcode protection is enabled for your phone.
- After adding a card, follow on-screen instructions to turn on notifications for your phone (if not already done) to complete setup.
Make Purchases
You can add up to 5 payment cards to the Wallet and choose a default. To make purchases, look for the contactless payment symbol on the payment terminal.
For all customers except those in Australia:
- If prompted, enter your 4-digit tracker PIN code. Your default card appears.
- To pay with your default card, hold your wrist near the payment terminal. To pay with a different card, tap to find the card you want and hold your wrist near the terminal.
When payment succeeds, your tracker vibrates and shows confirmation.
If the terminal doesn't recognize your Fitbit device, ensure the tracker face is near the reader and the cashier knows you're using contactless payment.
For added security, you must wear Charge 3 on your wrist to use contactless payments.
Pay for Transit
Use contactless payments to tap on and off at transit readers. Pay with the same card on your Fitbit tracker when tapping on and off. Ensure your device is charged before your trip.
4.8. Weather
See the weather in your current location and two additional locations you choose in the Weather app on your tracker.
If weather doesn't appear, check that location services are on for the Fitbit app. If you change locations or don't see updated data, sync your tracker.
Choose your unit of temperature in the Fitbit app.
To add or remove a city:
- From the Today tab in the Fitbit app, tap the icon in the top left > Charge 3 tile.
- Tap 'Gallery'.
- Tap the 'Weather' app. You might need to swipe up to find it.
- Tap 'Settings' > 'Add city' to add up to 2 additional locations or tap 'Edit' > the 'X' icon to delete a location. You cannot delete your current location.
4.9. Agenda
Connect your phone's calendar in the Fitbit app to see upcoming calendar events for today and tomorrow in the Agenda app on your tracker.
5. Troubleshooting
5.1. Restart Charge 3
If you can't sync Charge 3, have trouble tracking stats, or receiving notifications, restart your tracker from your wrist:
Open the Settings app and tap 'About' > 'Reboot Device'.
If Charge 3 is unresponsive:
- Connect Charge 3 to the charging cable.
- Press and hold the buttons on your tracker for 8 seconds. Release the buttons. When you see a smiley face and Charge 3 vibrates, the tracker has restarted.
Restarting your tracker does not delete any data.
Important: Charge 3 has a small hole (altimeter sensor) on the back. Do not insert any items, such as paper clips, into this hole as you can damage your tracker.
5.2. Erase Charge 3
If you want to give Charge 3 to another person or return it, first clear your personal data:
On Charge 3, open the Settings app > 'About' > 'Clear User Data'.
5.3. Update Charge 3
Update your tracker to get the latest features and product updates. When an update is available, a notification appears in the Fitbit app. Follow the progress bars on Charge 3 and in the Fitbit app until complete. Keep your tracker and phone close during the update.
Updating Charge 3 takes several minutes and can be demanding on the battery. We recommend plugging your tracker into the charger before starting the update.
5.4. Heart-Rate Signal Missing
If your heart-rate sensor has difficulty detecting a signal, dashed lines appear.
If your tracker doesn't detect a heart-rate signal, first ensure heart-rate tracking is on in the Settings app. Next, ensure you're wearing your tracker correctly (move it higher or lower on your wrist, tighten/loosen the band). Charge 3 should be in contact with your skin. After holding your arm still and straight for a short time, your heart rate should reappear.
5.5. GPS Signal Missing
Environmental factors (tall buildings, dense forest, steep hills, thick cloud cover) can interfere with your phone's ability to connect to GPS satellites. If your phone is searching for a GPS signal during an exercise, "connecting" appears at the top of the screen. For best results, wait for your phone to find the signal before starting your workout.
5.6. Other Issues
If you experience any of the following, restart your tracker:
- Won't sync
- Won't respond to taps, swipes, or button press
- Won't track steps or other data
- Won't show notifications
6. General Info and Specifications
6.1. Sensors and Components
Fitbit Charge 3 contains the following:
- Optical heart-rate tracker
- Altimeter (tracks altitude changes)
- 3-axis accelerometer (tracks motion patterns)
- Vibration motor
6.2. Materials
The housing and buckle are made of anodized aluminum. While anodized aluminum can contain traces of nickel, the amount in all Fitbit products meets the European Union's stringent Nickel Directive.
The classic band is made of a flexible, durable elastomer material similar to that used in many sports watches.
6.3. Wireless Technology
Charge 3 contains a Bluetooth 4.0 radio transceiver. Fitbit Pay-enabled devices also contain an NFC chip.
6.4. Haptic Feedback
Charge 3 contains a vibration motor for alarms, goals, notifications, and reminders.
6.5. Battery
Charge 3 contains a rechargeable lithium-polymer battery.
Battery Warning: This device uses a lithium-ion battery. If the following guidelines are not followed, the life of the lithium-ion battery may be shortened or there is a risk of damage to the device, fire, chemical burn, electrolyte leakage, and/or injury.
- Do not disassemble, puncture, or damage the device or battery.
- Do not remove or try to remove the battery that the user cannot replace.
- Do not expose the battery to flames, explosions, or other hazards.
- Do not use sharp objects to remove the battery.
6.6. Memory
Charge 3 stores your data, including daily stats, sleep information, and exercise history, for 7 days. See your historical data in the Fitbit app.
6.7. Display
Charge 3 has an OLED display.
6.8. Band Size
Band sizes are shown below. Accessory bands sold separately may vary slightly.
| Band Type | Circumference |
|---|---|
| Small band | Fits a wrist between 5.5 - 7.1 inches (140 mm - 180 mm) |
| Large band | Fits a wrist between 7.1 - 8.7 inches (180 mm - 220 mm) |
6.9. Environmental Conditions
| Condition | Range |
|---|---|
| Operating temperature | 14° to 113° F (-10° to 45° C) |
| Non-operating temperature | -4° to 14° F (-20° to -10° C) 113° to 140° F (45° to 60° C) |
| Maximum operating altitude | 30,000 feet (9,144 m) |
7. Regulatory and Safety Notices
Regulatory content for certain regions can be viewed on your device: Settings > About > Regulatory Info.
7.1. USA: Federal Communications Commission (FCC) Statement
Models FB409 and FB410 comply with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
7.2. Canada: Industry Canada (IC) Statement
Models FB409 and FB410 comply with Industry Canada license-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
7.3. European Union (EU) Declaration of Conformity
Fitbit, Inc. declares that radio equipment type Model FB410 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at www.fitbit.com/safety.
7.4. Safety Statement
This equipment has been tested to comply with safety certification in accordance with the specifications of EN Standard: EN60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 & EN62368-1:2014 + A11:2017.
8. Warranty and Support
For more information about your tracker, how to track your progress in the Fitbit app, and how to build healthy habits with Fitbit Premium, visit help.fitbit.com.
Find warranty information and the fitbit.com return policy on the official Fitbit website.