ICAR Car Key Case Cover Fob

Contents

ICAR Car Key Case Cover Fob User Manual

Model: Car Key Case Cover Fob

Brand: ICAR

1. Introduction

This manual provides essential instructions for the safe and effective use of your ICAR Car Key Case Cover Fob. Please read this manual thoroughly before installation and use, and retain it for future reference.

2. Safety Information

Warning:

  • Not suitable for children under 3 years.
  • To be used under the direct supervision of an adult.

3. Product Specifications

Feature Detail
Brand Name ICAR
Origin Mainland China
Material Plastic
Compatibility (OEM NO.) For TOYOTA Corolla C-HR CHR car key case cover fob (also compatible with Prius, Camry, RAV4, Prado models as per product title)
Quality High Quality
High-concerned chemical None
Package Length 10 cm
Package Width 10 cm
Package Height 3 cm
Package Weight 0.08 kg
Product dimensions diagram showing length 8.3cm, width 4.5cm, and height 3cm for the car key case.
Figure 1: Product Dimensions. The key case measures approximately 8.3cm in length, 4.5cm in width, and 3cm in height.

4. Package Contents

The package typically includes:

  • 1 x Car Key Case Cover Fob (in selected color/style)
  • 1 x Keychain attachment (e.g., carabiner or circular ring)
  • 1 x Small screwdriver (for ABS/metal material cases, if applicable)
Contents of the key case package including a black car-shaped key case, three compatible key fobs, a small screwdriver, and a carabiner keychain.
Figure 2: Typical Package Contents. This image shows a black key case, compatible key fobs, a screwdriver, and a keychain.

5. Setup and Installation

  1. Before First Use: Remove all protective films from the key case device.
  2. Installing Your Key Fob:
    • For TPU (Thermoplastic Polyurethane) Material Cases: Simply slip your car key fob into the case. Ensure it fits snugly and all buttons align correctly.
    • For ABS (Acrylonitrile Butadiene Styrene) or Metal Material Cases:
      1. Use the provided small screwdriver to carefully remove the screws on the key case.
      2. Gently separate the two halves of the key case.
      3. Insert your car key fob into one half of the case, ensuring it is properly seated.
      4. Align the other half of the case and carefully close it.
      5. Re-insert and tighten the screws using the screwdriver until secure. Do not overtighten.
  3. Attaching the Keychain: The keychain can be attached using either a small circular connection or a D-ring connection point on the key case.
Video 1: Key Case Installation Demonstration. This video illustrates the process of inserting a key fob into the case and attaching the keychain.
Image showing a white car-shaped key case, a black key case with a key fob inserted, and three compatible key fobs, demonstrating compatibility and fit.
Figure 3: Key Fob Compatibility. This image highlights the types of key fobs that fit into the car-shaped key cases.

6. Operation

Once your car key fob is securely installed in the case, operate your car's remote functions as usual. The case is designed to protect your key fob without interfering with its signal or button functionality.

A hand holding a black car key case, alongside two car-shaped key cases (black and white) and three compatible key fobs, illustrating the product's appearance and function.
Figure 4: Product in Use. The key case provides protection while allowing full functionality of the key fob.

7. Maintenance

  • Cleaning: Wipe the key case with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the material or finish.
  • Inspection: Periodically check the key case for any signs of wear or damage. Ensure all screws (if applicable) remain tight.
  • Storage: Store the key case in a cool, dry place away from direct sunlight and extreme temperatures when not in use.

8. Troubleshooting

  • Key Fob Not Fitting: Double-check the compatibility of your key fob with the specific model of the key case. Ensure you are using the correct installation method for the material (slip-on for TPU, screw-together for ABS/metal).
  • Buttons Not Responding: Ensure the key fob is correctly seated within the case and that the case is not obstructing any buttons. For screw-together cases, ensure it is assembled correctly.
  • Keychain Detaching: Verify that the keychain is securely attached to the designated connection point. For D-rings or circular connections, ensure they are fully closed.

9. User Tips

  • For screw-type cases, apply gentle pressure when tightening screws to avoid stripping the threads.
  • If your key fob has a physical key, ensure the case design allows for its easy access or removal if needed.
  • Consider the "With Light" or "No Light" options based on your preference for visual indicators on the key case.

10. Warranty and Support

For any product-related inquiries, support, or warranty claims, please contact the manufacturer directly:

Manufacturer:

Company Name: Shenzhen Aoyefeng Foreign Trade Center

Address: Room 1302, Lane 1, Mabu New Village, Mabu Community, Xixiang Street, Baoan District, Shenzhen, Guangdong, China

Email: 1665502040@qq.com

Telephone: 86-13530430519

Website: https://www.aliexpress.com/store/1103204845

EU Authorized Representative:

Company Name: Synertrade FR SAS

Address: 9 rue du Bat d'Argent, 69001 Lyon, France Rhone Auvergne-Rhone-Alpes, France

Email: info@syner-sarl.cn

Telephone: 33-774555006

For the full user manual in PDF format, please refer to the official document available at the seller's store or contact support. (Reference: User manual (PDF))

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.