hippcron M616 Universal Keyless Entry System

Contents

Hippcron M616 Universal 12V Car Remote Central Kit Keyless Entry System User Manual

Model: M616

1. Product Overview

The Hippcron M616 is a universal 12V car remote central kit keyless entry system designed to provide convenient remote locking/unlocking and enhanced security features for your vehicle. This system includes a main control unit, wiring harness, and two remote controls, offering functions such as remote central locking, trunk release, window closing control, and car search.

Hippcron M616 Keyless Entry System Components
Image 1: Main components of the Hippcron M616 Keyless Entry System, including the control box, wiring, and two remote controls.

2. Components Included

  • 1 x Main Control Unit
  • 1 x Wiring Harness
  • 2 x Remote Controls
  • 1 x Instruction Manual (this document)

3. Specifications

Main Control Unit

  • Working Voltage: DC 12V
  • Static Current: 8.5mA
  • Output Current (Turning Light): 7.5A x 2
  • Output Current (Central Locking): 10A
  • Working Frequency: 315-316MHz / 433.92MHz

Remote Control

  • Working Voltage: DC 12V
  • Average Static Current: 0mA
  • Battery Type: 23/27A/12V (Fastener battery: CR2016)

4. Setup and Installation

Important: Installation of this keyless entry system requires professional car electrician knowledge. It is suitable for 12V vehicles. Incorrect installation can damage your vehicle's electrical system or the product itself.

4.1 Wiring Diagram

Refer to the detailed wiring diagram below for proper connections. The diagram illustrates connections for electronic and pneumatic door locks, parking lights, power windows, trunk release, battery, siren, and LED indicator.

Detailed Wiring Diagram for Car Remote Central Kit
Image 2: Comprehensive wiring diagram for the keyless entry system. This diagram shows connections for various vehicle functions and power sources.

Wiring Connections Explained:

Wire ColorFunctionNotes
Green/GrayTo original central door lock wiring methodSee detailed schemes below
Yellow/GreenTo original central door lock wiring methodSee detailed schemes below
Orange/GrayTo original central door lock wiring methodSee detailed schemes below
Orange/WhiteTo original central door lock wiring methodSee detailed schemes below
Black/WhiteTo original central door lock wiring methodSee detailed schemes below
Yellow/BlackTo original central door lock wiring methodSee detailed schemes below
GrayParking Lights
Blue/BlackPower Windows Output (-25S)
Green/BlackTrunk Release (-12V)
BlackBattery -12V (Ground)
RedBattery +12V
GrayParking Lights
PurpleSiren +12V(Default without Siren/Horn)

Internal Working Schemes for Central-Locking:

  1. If the car is originally equipped with a central-locking system and the driver's door has an electric motor: The wiring can be made as per Figure A in the diagram.
  2. If the car is originally equipped with a central-locking system and the driver's door has only one switch: A two-wire actuator should be installed. Wiring as per Figure B (positive trigger wiring diagram).
  3. If the car is originally equipped with a central-locking system (including in the driver's door): Wiring as per Figure D (positive trigger wiring diagram).
  4. If the car is originally equipped with a pneumatic central-locking system: Wiring as per Figure E (positive electric circuit installation) or Figure F (pneumatic circuit installation). When wiring as per this diagram, cut the jumper at the main unit. The central-controlling time is 4 seconds.

4.2 Antenna Installation

Ensure the antenna is inserted firmly into the control box to prevent it from falling off during operation.

Antenna Insertion into Control Box
Image 3: Illustration showing the firm insertion of the antenna into the control box for optimal signal reception.

5. Operating Instructions

The system offers a variety of functions accessible via the remote controls. The remote control features a key embryo, tail box button, unlock key, and a general press key.

Remote Control Key Layout
Image 4: Diagram of the remote control key, highlighting the key embryo, tail box button, unlock key, and general press key.

5.1 Key Functions

Table of Rich Functions
Image 5: Table summarizing the various functions of the keyless entry system and how to activate them.
  • LOCK: Press the lock button on the remote once. The parking lights will flash once, the siren will sound once (if connected), and the central door lock will activate automatically. The LED indicator will flash once per second. (Default: no siren sound).
  • UNLOCK: Press the unlock button on the remote once. The parking lights will flash twice, the siren will sound twice (if connected), and the central door lock will unlock automatically. The LED indicator will turn off.
  • CAR SEARCH: Press the car search button on the remote once. The parking lights will flash for 30 seconds, and the siren will sound (if connected). Press the same button again to stop the function. This function is only available if your keys have a 4-button car searching function.
  • POWER WINDOW OUTPUT (-25S): Press the lock button once. The turning lights flash once, and the door locks. The power window signal will output a negative trigger for 25 seconds. This function depends on the car circuit's delay.
  • TRUNK RELEASE (-3s, 50mA): Press the trunk release button on the remote transmitter for 3 seconds to release the trunk. The parking lights will flash three times. This function is assisted by an actuator and a relay.

5.2 Code Learning

To program a new remote control or re-program an existing one:

  1. Press the learning switch on the main control unit once.
  2. The turning lights will flash once.
  3. Within a few seconds, press any button on the remote control you wish to program.
  4. The code will be learned. If you need to program more remotes, repeat the process for each remote.

5.3 Clear Code

To clear all programmed remote control codes:

  1. Press and hold the learning switch on the main control unit for 3 seconds.
  2. The turning lights will flash three times, indicating that all codes have been cleared.

6. Maintenance

  • Remote Control Battery: If the remote control range decreases or it stops responding, replace the battery (CR2016).
  • Cleaning: Keep the main control unit and remote controls clean and dry. Avoid exposure to water or excessive moisture.
  • Wiring Inspection: Periodically check the wiring connections for any signs of wear, corrosion, or loose connections.

7. Troubleshooting

  • System Not Responding:
    • Check the remote control battery.
    • Ensure the main control unit is receiving power (check battery connections).
    • Verify all wiring connections are secure and correct according to the diagram.
    • Try re-learning the remote control code (see Section 5.2).
  • Remote Control Range is Poor:
    • Replace the remote control battery.
    • Ensure the antenna is firmly inserted into the control box and not obstructed.
    • Environmental factors (e.g., strong radio interference) can affect range.
  • Specific Function (e.g., Trunk Release, Window Closing) Not Working:
    • Confirm that your vehicle supports this function and that the system is correctly wired for it.
    • For window closing, ensure your car has a power window closer.
    • For trunk release, ensure your car has an electronic trunk lock and the function is assisted by an actuator and relay.
  • Alarm Functionality: This system is an Anti-Theft Device One-Way, primarily providing remote central locking and basic light/sound signals upon lock/unlock. It is not a full-featured car alarm system with advanced sensors.

8. User Tips

  • Professional Installation: Many users recommend professional installation to ensure correct wiring and optimal performance, especially given the complexity of vehicle electrical systems.
  • Spare Remotes: If you need additional remote controls or replacement cases, contact the seller or manufacturer for compatible parts.
  • Code Learning: Familiarize yourself with the code learning process (Section 5.2) in case you need to program new remotes or resolve connectivity issues.

9. Warranty and Support

9.1 Warranty Terms

  • The warranty remains valid for one year from the purchasing date.
  • Within the warranty period, all manufacturing defects can be repaired by authorized service agents with the support of this warranty and the purchase invoice.
  • Repair of damages resulting from unjustified causes will be subject to a charge at actual cost level.

9.2 Exclusions of the Warranty

  • Failure of warning siren, remote control, shocking sensor, or main unit caused by water ingress.
  • Normal wear of the battery.
  • Damages resulting from tampering, unapproved disassembling, rebuilding, and improper use.

9.3 Additional Resources

For a more detailed user manual, you may refer to the official PDF document: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.