AVATTO DMS16/ZDMS16

Contents

AVATTO Tuya WiFi/ZigBee Smart Dimmer Switch Module User Manual

Models: DMS16 / ZDMS16

1. Introduction

This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of your AVATTO Tuya WiFi/ZigBee Smart Dimmer Switch Module. This module allows for smart control of your lighting, including stepless dimming, via a smartphone application, voice commands, or traditional wall switches. Please read this manual carefully before installation and use to ensure proper function and safety.

2. Safety Warnings

  • Installation must be carried out by a qualified electrician in accordance with local regulations.
  • Keep the device out of reach of children.
  • Keep the device away from water, damp, or hot environments.
  • Install the device away from strong signal sources such as microwave ovens that may cause signal interruption, leading to abnormal operation of the device.
  • Obstruction by concrete walls or metallic materials may reduce the effective operation range of the device and should be avoided.
  • Do NOT attempt to disassemble, repair, or modify the device.

3. Technical Specifications

The AVATTO Smart Dimmer Switch Module comes in various configurations (WiFi/Zigbee, 1-gang/2-gang). Refer to the specific model for exact load capacities.

Product size diagram and detailed technical specifications table for AVATTO Smart Dimmer Module.

Figure 1: Product Dimensions and Technical Specifications

General Specifications
Attribute Value
Product Type Zigbee Dimmer Module / WiFi Dimmer Module
Model Number DMS16/ZDMS16
Voltage AC100-240V 50/60Hz
Operation Frequency 2.405GHz-2.480GHz (Zigbee) / IEEE 802.11b/g/n (WiFi)
Operation Temperature -10°C to +40°C
Protocol Zigbee 3.0 (for Zigbee models)
Operation Range <100m
Dimensions (WxDxH) 39x39x19.4 mm
IP Rating IP20
Certification CE, ROHS
Max. Load (1-Gang) LED (AC230V 150W) / (AC120V 80W)
Max. Load (2-Gang) LED (AC230V 2x100W) / (AC120V 2x60W)

4. Package Contents

The package typically includes:

  • AVATTO Smart Dimmer Switch Module (1-gang or 2-gang, WiFi or Zigbee version)
  • Instruction Manual (this document)
Four AVATTO dimmer modules, showing 1CH WiFi, 2CH WiFi, 1CH Zigbee, and 2CH Zigbee variants with their respective voltage and load ratings.

Figure 2: Different variants of the AVATTO Smart Dimmer Module

5. Installation

Important: Ensure the power supply is turned OFF before performing any electrical installation work.

5.1 Wiring Instructions and Diagrams

  1. Turn off the power supply before carrying out any electrical installation work.
  2. Connect wires according to the wiring diagram provided below.
  3. Insert the module into the junction box.
  4. Turn on the power supply and follow the switch module configuration instructions (see Section 6).

Notes: Your smartphone should be close to the switch module when configuring, and ensure you have a minimum of 50% Wi-Fi signal strength (for WiFi models).

Detailed wiring diagrams for 1-channel and 2-channel Zigbee dimmer modules, showing connections for L, N, L1, S1, and S2 terminals, both with and without an external switch.

Figure 3: Wiring Diagrams for 1CH and 2CH Dimmer Modules (with and without external switch)

The diagram illustrates the connections for Live (L), Neutral (N), Load (L1, L2), and Switch (S1, S2) terminals. Ensure correct polarity and connections for safe operation.

5.2 Physical Installation

Illustration showing the compact size of the dimmer module and how it fits into a standard wall switch installation box.

Figure 4: Easy installation into a standard junction box

The module is designed for easy installation and is compatible with 98% of standard installation boxes. Its compact size allows it to be placed behind your existing wall switch.

6. Device Setup and App Configuration

6.1 System Requirements

  • WiFi Router (for WiFi models)
  • ZigBee Gateway (Tuya Zigbee Hub Required for Zigbee models)
  • Smartphone: iPhone, iPad (iOS 7.0 or higher) or Android (4.0 or higher)
Diagram showing system requirements including a WiFi router, Zigbee gateway, and smartphone for app control.

Figure 5: System Requirements for Smart Dimmer Module

6.2 App Download and Registration

  1. Scan the QR code below or search for "Tuya Smart" or "Smart Life" in the App Store (iOS) or Google Play (Android) to download the application.
    QR codes for downloading Tuya Smart App on iOS and Android.

    Figure 6: App Download QR Codes

  2. Log in or register your account with your mobile number or e-mail address. Follow the in-app instructions to verify and set up your login password. Create a family to organize your smart devices.

6.3 Adding the Device to the App (Pairing)

  1. Reset the Device: After wiring the switch module, press the reset key (if available on the module) or press and hold the traditional dimmer switch (connected to the module) for 10 seconds or more. The connected light should flash quickly, or the indicator light inside the module should flash quickly, indicating it's in configuration mode.
  2. Open Gateway Control Panel: Open the control panel of your Zigbee gateway in the App. Ensure the Zigbee Gateway is already added and installed to your WiFi network and the product is within its range.
  3. Add Sub-device: In the App, click "+" (Add sub-device) to select the appropriate product gateway. Follow the on-screen instructions for pairing.
  4. Connection Process: The connection process may take 10-120 seconds depending on your network conditions. Ensure your router, mobile, and device are as close as possible during this process.
  5. Once successfully added, you can control the device via your mobile phone.
Screenshots illustrating the app registration process, opening the Zigbee gateway control panel, and the device pairing steps.

Figure 7: App Setup and Device Pairing Flow

7. Operation

7.1 Manual Override

The dimmer module terminal reserves access for manual override using a push-switch:

  • Short Push (<1s): Toggles permanent on/off function.
  • Long Push (>1s): Adjusts the brightness level (stepless dimming).

Notes:

  • Both adjustments made on the App and via the push switch can overwrite each other; the last adjustment remains in memory.
  • App control is synchronized with the manual switch.
  • The "S" terminals may be left unconnected if no manual control is required.

7.2 App Control (Stepless Dimming)

Use the Tuya Smart or Smart Life app to control the brightness of your lights from 0% to 100%.

Smartphone app interface showing a slider for stepless dimming of a lamp, with a dimmer module icon.

Figure 8: Stepless Dimming via App

This feature allows you to set the perfect ambiance for various scenarios like sleeping, working, watching movies, or parties.

7.3 Voice Control

The module supports voice control through smart assistants like Alexa, Google Home, and Yandex Alice when integrated with the Tuya Smart/Smart Life app and a compatible hub (for Zigbee models).

Diagram showing the Zigbee Smart Light Switch Module connected to a WiFi Router, Tuya Zigbee Hub, and controlled by Voice Control (Google Home) and a smartphone app.

Figure 9: Voice and App Control Integration

7.4 2-Way Control Function

The module supports a 2-way control function, allowing a single light to be controlled by two different switches.

Diagram illustrating a 2-way control setup where one light is controlled by two separate wall switches, with the dimmer module integrated.

Figure 10: 2-Way Control Function Diagram

8. User Tips

  • Compatibility: Works well with both halogen and LED lamps. Dimming is smooth with no buzzing.
  • Home Assistant Integration: For Home Assistant users, custom quirks might be needed for full functionality, which can often be found online.
  • External Switch Type: If using an external switch, ensure you select the correct type in the app settings for proper control.
  • App Pairing: If you encounter issues with pairing, ensure the device is powered on, your gateway is available and has good internet conditions, and your smartphone is close to the module with a strong Wi-Fi signal.

9. Troubleshooting (FAQ)

Q1: What should I do if I can't configure the dimmer module?
A:
  • Check if the device is powered on.
  • Make sure the Zigbee gateway is available (for Zigbee models).
  • Ensure good internet conditions.
  • Verify the password entered in the App is correct.
  • Make sure the wiring is correct.
Q2: What device can be connected to this Zigbee dimmer module?
A: Triac LED lights, incandescent lamps, or halogen lamps.
Q3: What happens if the WiFi goes off?
A: You can still control the light connected to the dimmer module with your traditional switch. Once WiFi is active again, the device connected to the module will automatically reconnect to your WiFi network.
Q4: What should I do if I change the WiFi network or change the password?
A: You will need to re-connect your Zigbee/WiFi dimmer module to the new Wi-Fi network according to the App User Manual (Section 6.3).
Q5: How do I reset the device?
A: Turn off the traditional button switch (the one connected to the Zigbee dimmer module). Then press and hold for 10 seconds or more until the lamp connected to the module flashes quickly for pairing.

10. Maintenance

The AVATTO Smart Dimmer Switch Module requires minimal maintenance. To ensure optimal performance and longevity:

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the module to extreme temperatures or humidity.
  • Do not use harsh chemicals or abrasive cleaners on the device.
  • Ensure all wiring connections remain secure. If you suspect any issues, consult a qualified electrician.

11. Warranty and Support

The product comes with a 2-year warranty as per the technical specifications. For any issues or support, please refer to the official AVATTO support channels or the seller from whom you purchased the product.

A detailed user manual in PDF format is also available for download: View User Manual (PDF).

© 2024 AVATTO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.