Introduction
This manual provides detailed instructions for the operation and maintenance of your NJTY Digital Sport Stopwatch, Model YS-728L. This professional-grade chronometer offers 0.01-second accuracy and a range of functions including stopwatch, countdown timer, alarm, and clock with calendar. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your device.
For a downloadable PDF version of this manual, please refer to the official product page or click here.
Product Overview
The NJTY YS-728L stopwatch features a large LCD display and intuitive button controls. It is designed for various timing needs, from sports to daily tasks.
Button Functions
- M (Mode) Button: Used to switch between different operating modes (Clock, Stopwatch, Countdown, Alarm). Also used to save settings.
- S (Start/Stop/Select) Button: Starts and stops timing in Stopwatch mode, increases values during setting, and confirms selections.
- L (Lap/Reset/Light) Button: Records lap times or resets values in Stopwatch mode, shifts setting items, and activates the backlight.
- Light (Y) Button: Activates the backlight for 4 seconds.
Setup
Battery Installation
The stopwatch comes with a pre-installed CR2032 battery. If the display is dim or unresponsive, the battery may need replacement. To replace the battery:
- Carefully unscrew the back cover of the stopwatch.
- Remove the old CR2032 battery.
- Insert a new CR2032 battery with the positive (+) side facing up.
- Replace the back cover and secure the screws.
Initial Time and Date Setting (Clock Mode)
Upon first use or after battery replacement, you may need to set the current time and date.
- Ensure the stopwatch is in Clock Mode (indicated by the absence of other mode icons). If not, press the M button repeatedly until you are in Clock Mode.
- Press and hold the L button for approximately 1 second to enter the time setting state. The hour digit will start flashing.
- Press the S button to increase the value of the flashing item. Hold S to increase rapidly.
- Press the L button to cycle through the setting items: Hour → Minute → Second → Month → Day → Week.
- Once all settings are adjusted, press the M button to save the values and exit the setting mode.
Operating Instructions
Switching Modes
Press the M button repeatedly to cycle through the modes in the following order: Clock Mode → Stopwatch Mode → Countdown Mode → Alarm Mode.
Clock Mode
In Clock Mode, the display shows the current time and day of the week. To check the date, press the S button to toggle between time and date display.
Stopwatch Mode
In Clock Mode, press the M button once to enter Stopwatch Mode (indicated by a stopwatch icon on the left). The maximum timing is 29 hours, 59 minutes, and 59 seconds.
- Start Timing: Press the S button.
- Stop Timing: Press the S button again.
- Reset: While timing is paused, press the L button to clear the record to 0:00:00.
- Accumulative Timing: After stopping, press S again to resume timing from where it left off.
- Split Timing: While timing is active, press the L button to record a split time. The display will show the first split time. Press L again to view the next split time. Press S to stop timing, then L to clear records.
Countdown Mode
In Clock Mode, press the M button twice to enter Countdown Mode (indicated by a countdown icon on the left). The maximum countdown time is 29 hours, 59 minutes, and 59 seconds.
- Setting Countdown Time: In Countdown Mode, press and hold the L button for 1 second. The hour digit will flash.
- Press the S button to increase the flashing value. Hold S for rapid increase.
- Press the L button to cycle through setting items: Hour → Minute → Second → Single Countdown (C1) → Cycle Countdown (S1) → Reminder Duration.
- Start Countdown: After setting, press the S button to start.
- Pause Countdown: Press the S button during countdown.
- Reset Countdown: While paused or before starting, press L to reset. If not started or paused, press L and S simultaneously to clear.
- Alarm Prompt: When a single countdown ends, an alarm will sound, and the stopwatch will begin positive counting. Press any button to stop the alarm and restore the set value.
- Cycle Countdown: If S1 (Cycle Countdown) is selected, the countdown will automatically restart after it finishes.
Alarm Function
In Clock Mode, press the M button three times to enter Alarm Mode (indicated by "WE" flashing for the week).
- Setting Alarm Time: In Alarm Mode, press and hold the L button for 1 second. The hour digit will flash.
- Press the S button to increase the flashing value. Hold S for rapid increase.
- Press the L button to cycle through setting items: Hour → Minute.
- Press the M button to save the settings.
- Activate/Deactivate Alarm: Press the S button to turn the alarm ON or OFF. When ON, an alarm icon and "on" will appear on the display.
Hourly Chime Function
To activate or deactivate the hourly chime, press the L and S buttons simultaneously in Clock Mode.
Backlight
Press the Light (Y) button to illuminate the display for approximately 4 seconds, useful in low-light conditions.
Mute Function (Key Sounds)
To turn the key sounds ON or OFF, press and hold the S button for 3 seconds in Clock Mode. When muted, a mute icon will appear on the display.
Power On/Off
To turn the device ON or OFF, press and hold the M button for 3 seconds in Clock Mode. When powered off, the screen is disabled, but the internal clock continues to run, preserving time settings.
Maintenance
Cleaning
Wipe the stopwatch with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the casing or display.
Storage
Store the stopwatch in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, consider removing the battery to prevent leakage.
Water Resistance
This stopwatch is not waterproof. Avoid exposing it to water or high humidity to prevent damage to internal components.
Troubleshooting
- Display is dim or blank: Check the battery. Replace with a new CR2032 battery if necessary. Ensure the battery is inserted correctly.
- Buttons are unresponsive: Try turning the device off and on again. If the issue persists, check the battery.
- Time/Date is incorrect: Re-enter the time and date settings as described in the "Initial Time and Date Setting" section.
- Stopwatch/Countdown not working: Ensure you are in the correct mode. If the display is frozen, try resetting the device by removing and reinserting the battery.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | NJTY |
| Model Number | YS-728L |
| Theory | Digital |
| Type | Mini, Multifunctional |
| Stopwatch Accuracy | 0.01 seconds |
| Max Stopwatch Time | 29 hours, 59 minutes, 59 seconds |
| Max Countdown Time | 29 hours, 59 minutes, 59 seconds |
| Clock Calendar | 24-hour system, 2000-2099 year range |
| Alarm Duration | 30 seconds |
| Backlight | Yes (4-second illumination) |
| Battery Type | CR2032 (included) |
| Package Dimensions (L x W x H) | 17 cm x 12 cm x 3 cm |
| Package Weight | 0.06 kg |
User Tips
- Silent Operation: Utilize the mute function (press and hold S for 3 seconds in Clock Mode) for silent use in environments where key sounds might be disruptive.
- Battery Saving: The power-off feature (press and hold M for 3 seconds in Clock Mode) disables the screen but keeps the internal clock running, preserving your time settings while saving battery life.
- Low-Light Visibility: The night light display is very useful. Remember to press the Light (Y) button for a quick 4-second illumination.
Frequently Asked Questions (FAQ)
- Q: How do I turn off the timer?
- A: To stop the stopwatch, press the S button. To stop the countdown timer, press the S button. To completely clear a paused stopwatch record, press the L button. For countdown, if not started or paused, press L and S simultaneously to clear the records.
- Q: Does this stopwatch have a vibration function?
- A: No, based on the product specifications and functional descriptions, this stopwatch does not feature a vibration function. It uses an audible alarm for alerts.
Warranty and Support
For any issues not covered in this manual or for further assistance, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.