1. Introduction
The Coolmoon Diamond 5V 3Pin PWM ARGB Fan is designed to provide efficient cooling and vibrant customizable lighting for your PC case, CPU cooler, or radiator. Featuring PWM control for automatic speed adjustment and 5V ARGB synchronization, these fans enhance both the performance and aesthetics of your computer system.
Video demonstrating the Coolmoon ARGB fans and controller with various lighting effects.
2. Safety Information
- Ensure all power is disconnected from your computer before installation or maintenance.
- Handle components with care to avoid damage.
- Do not plug in the wrong power supply interface; incorrect connections can damage the equipment.
- Keep out of reach of children.
- This product is designed for internal computer use only.
3. Package Contents
Depending on the purchased variant, your package may include:
- Coolmoon Diamond ARGB Fans (1pc, 2pcs, 3pcs, 4pcs, 5pcs, or 6pcs)
- Controller (White Hub, Black Hub, White Music Hub, or Black Music Hub)
- Remote Control
Image: Coolmoon Diamond ARGB Fans with Controller and Remote, illustrating typical package components.
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | Diamond 5V 3Pin PWM Fan |
| Fan Size | 120mm x 120mm x 25mm |
| Voltage | DC 12V + 5V |
| Current | 0.25A ±10% |
| Fan Speed | 800 - 1700 RPM ±10% |
| Air Volume | 66 CFM ±10% (Max) |
| Noise Level | 30 dBA ±10% |
| Bearing Type | Fluid Bearing (Hydraulic bearing) |
| Power Interface | 4PIN (PWM) + 3PIN (5V ARGB) |
| Fan Life | 50,000 hours |
| Blade Quantity | 11 |
| Weight | 0.135KG ±3% |
| Certification | CE |
Image: Detailed technical parameters for the Coolmoon Diamond ARGB fan.
5. Setup and Installation
Follow these steps to install your Coolmoon Diamond ARGB Fans:
5.1 Physical Installation
- Prepare your PC: Ensure your computer is powered off and unplugged from the wall socket. Open your PC case.
- Mount the Fans: Install the fans in your desired locations (e.g., CPU radiator, water cooler, or PC case fan mounts). The fans are 120mm and designed for standard mounting points.
- Reduce Vibration: The fans are equipped with 8 rubber pads to reduce vibration and noise. Ensure these are properly seated during installation.
Image: Coolmoon fan highlighting 8 rubber pads designed to reduce noise and vibration.
Image: Example of a Coolmoon fan installed on a CPU cooler.
Image: Example of multiple Coolmoon ARGB fans installed inside a computer case.
5.2 Wiring Connections
Refer to the wiring diagram below for proper connection of the fans and controller.
Image: Detailed wiring diagram for connecting Coolmoon ARGB fans and controller to a motherboard and power supply.
- Connect Fans to Controller: Connect the 4PIN PWM cables from the fans to the 4PIN temperature control ports on the controller. Connect the 5V 3PIN ARGB cables from the fans to the 3PIN 5V ARGB SYNC light ports on the controller. The controller supports 8x 4PIN PWM ports and 10x 3PIN 5V ARGB ports.
- Connect Controller to Motherboard (ARGB Sync): If your motherboard supports 5V ARGB lighting synchronization (e.g., AURA SYNC, Gigabyte RGB FUSION, MSI Mystic Light Sync), connect the 5V ARGB interface cable from the controller to the corresponding 5V 3PIN ARGB header on your motherboard. This allows software control of the lighting.
- Connect Controller to Motherboard (PWM Control): Connect the 4PIN PWM interface cable from the controller to the CPU FAN interface on your motherboard. This enables automatic fan speed adjustment based on CPU temperature.
- Power Connection: Connect the SATA power cable from the controller to your power supply unit (PSU).
- Optional: Computer Restart Button: The light mode can be switched by connecting the computer restart button to the controller. This is an optional connection.
WARNING: Do not plug in the wrong power supply interface, otherwise it will burn out equipment!
Image: Coolmoon multi-interface controller showing its 4PIN PWM and 3PIN 5V ARGB ports.
Image: Diagram illustrating how to connect the ARGB cable for motherboard synchronization (AURA SYNC, RGB FUSION, MSI Mystic Light Sync).
6. Operating Instructions
6.1 Fan Speed Control (PWM)
The fans support PWM (Pulse Width Modulation) control. When connected to the CPU FAN header on your motherboard, the fan speed will automatically adjust between 800 and 1700 RPM based on the CPU temperature. This ensures optimal cooling performance while saving energy and reducing noise when not under heavy load.
Image: Coolmoon fan illustrating the 4PIN PWM interface and the 800-1700 RPM speed range.
6.2 ARGB Lighting Control
The fans feature 5V 3PIN addressable RGB (ARGB) lighting, allowing for customization of 16 million colors. You can control the lighting in two ways:
- Motherboard Software Synchronization: If connected to a compatible 5V 3PIN ARGB header on your motherboard, you can use your motherboard's RGB software (e.g., ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync) to program and customize the lighting effects.
- Remote Control: Use the included remote control to switch light modes, adjust colors, and control lighting speed.
Image: Coolmoon fan showcasing its vibrant ARGB lighting capabilities with 16 million customizable colors.
Image: Coolmoon PWM and ARGB controller with its remote control, used for managing fan speed and lighting effects.
7. Maintenance
- Cleaning: Periodically clean the fan blades and housing to prevent dust buildup, which can reduce cooling efficiency and increase noise. Use a soft brush or compressed air. Ensure the computer is powered off and unplugged before cleaning.
- Check Connections: Regularly inspect all cables and connections to ensure they are secure and free from damage.
- Bearing Longevity: The fluid bearing design provides a long lifespan of approximately 50,000 hours and requires no lubrication.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan not spinning | No power, incorrect connection, faulty fan. | Check SATA power cable connection to PSU. Ensure 4PIN PWM cable is securely connected to motherboard. Test with another fan or port if possible. |
| ARGB lights not working | Incorrect ARGB connection, faulty controller/remote, software issue. | Verify 5V 3PIN ARGB cable is correctly connected to motherboard or controller. Check remote control battery. Ensure motherboard RGB software is updated and configured correctly. |
| Excessive noise | Loose mounting, dust buildup, high fan speed, faulty bearing. | Ensure fans are securely mounted with rubber pads. Clean fan blades. Adjust fan speed settings in BIOS/UEFI or software. If noise persists, the bearing may be faulty. |
9. User Tips
- Effective Cooling: These fans provide good airflow, contributing to effective system cooling. Ensure proper fan orientation for optimal air intake and exhaust.
- Noise Consideration: While designed to be quiet, some users have noted that the fans can produce noticeable noise, especially at higher RPMs. Consider adjusting fan curves in your motherboard's BIOS/UEFI or using fan control software to balance cooling performance with noise levels.
10. Warranty and Support
For detailed warranty information, product support, and further documentation, please refer to the official user manual PDF provided by the manufacturer. This document includes the Declaration of Conformity, confirming adherence to Electromagnetic Compatibility Directive 2014/30/EU and Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU.
The Declaration of Conformity was issued by Shenzhen Rong Shi Tai Electronic Co., Ltd., located at 2F C, NO.166 Longnan Road, Nanyue Community, Baolong Street, Longgang District, Shenzhen, China. The responsible person is ZHU MINGWEI. The EU Representative is eVatmaster Consulting GmbH, Bettinastr. 30, 60325, with contact information 6995179070.
A PDF version of the user manual is available for download: View User Manual (PDF)