Sbtool USB 3.1 OTG Adapter Type-C to USB-A 10Gbps

Contents

USB 3.1 OTG Adapter Type-C to USB-A 10Gbps User Manual

Model: USB 3.1 OTG Adapter Type-C to USB-A 10Gbps

Brand: Sbtool | Issue Date: 2026 | Version: V1.0

1. Important Safety Information

Please read all instructions carefully before use. Failure to comply with these instructions may result in product damage or personal injury.

  • WARNING: Keep the device and its cables out of reach of children under 3 years old.
  • The product must be kept away from children unless under adult supervision.
  • Do not use this product for any purpose other than its intended use.
  • Inspect the product thoroughly before each use; do not use the product if any damage is found.
  • Follow the installation and operation instructions strictly to avoid accidental injury.

2. Product Overview

The Sbtool USB 3.1 OTG Adapter is a compact and efficient solution for connecting USB-A devices to USB-C ports. It supports high-speed data transfer up to 10Gbps and fast charging capabilities. Its ultra-slim design allows for side-by-side use with other peripherals.

USB 3.1 OTG Adapter Type-C to USB-A 10Gbps
Figure 1: Overview of the USB 3.1 OTG Adapter.
Ultra Slim and Compact design with product dimensions
Figure 2: The adapter features an ultra-slim and compact design, measuring approximately 1.49 inches in length, 0.59 inches in width, and 0.27 inches in height.

3. Setup and Connection

To set up your USB 3.1 OTG Adapter, follow these steps:

  1. Verify Compatibility: Ensure that the device you are connecting to (e.g., laptop, smartphone) has a USB-C port, and the peripheral you wish to use (e.g., USB flash drive, USB charger) has a USB-A connector.
  2. Insert Adapter: Insert the USB-C end of the adapter firmly into the USB-C port of your host device.
  3. Connect Peripheral: Insert the USB-A connector of your peripheral device into the USB-A port of the adapter.
  4. Secure Connection: Ensure both connections are tight and secure for optimal performance.
Adapter connected to a laptop with a USB flash drive
Figure 3: The adapter supports double-sided 10Gbps transfer speed when connected to a compatible device and USB flash drive.

4. Operating Instructions

4.1. Charging and Data Transmission

Once connected, the adapter automatically recognizes the connection. You can then proceed to charge your device or transfer files, pictures, and videos without requiring any additional settings or drivers.

Adapter providing stable and efficient charging to a smartphone
Figure 4: The adapter provides stable and efficient charging, supporting up to 5V/3A or 9V/2A.

4.2. Audio and Video Transmission

To transmit audio and video, connect your playback device (e.g., mobile phone, computer) to a display or playback device (e.g., TV, speakers) using the adapter. Switch the signal source on your display/playback device to the corresponding input interface to enjoy high-definition audio and video.

Multiple usage scenarios including charging a phone, connecting to a laptop, and charging in a car
Figure 5: The adapter supports various usage scenarios, including fast charging for phones, connecting to laptops for data transfer, and in-car charging.

5. Wide Compatibility

The adapter is designed for wide compatibility with various devices:

Compatibility diagram for USB 3.1 Gen 2 Male Port and Type C Female Port
Figure 6: The adapter's USB 3.1 Gen 2 Male Port is compatible with USB Chargers, Laptops, USB Power Banks, USB Car Chargers, USB Hubs, and Desktops. Its Type-C Female Port is compatible with VR headsets, Cellphones, Type-C Headphones, Tablets, USB-C Hard Disks, and USB-C Flash Disks.

6. Maintenance and Upkeep

  • Cleaning: Regularly clean dust from the adapter's interfaces using a dry, soft cloth. Do not use liquid cleaners.
  • Storage: When storing, gently wind any connected cables to avoid excessive bending, which can damage the wire core and extend service life.
  • Damage Inspection: If the adapter or any connected wire shows signs of damage or copper leakage, immediately stop using it and replace it with a new one.

7. Troubleshooting

  • Poor Connection/No Data Transfer: If you experience poor connection or inability to transmit data, check that the adapter and connected devices are securely plugged in. Inspect for any dust or foreign objects in the ports and clean if necessary.
  • Overloading: This adapter is designed for compliant devices. Avoid using it with high-power equipment that exceeds its specifications, as this may cause damage due to overloading.
  • Environmental Factors: Do not forcefully pull or bend the adapter or connected cables. Avoid placing the adapter in high-temperature, humid, or dusty environments.
  • Liquid Exposure: Keep the adapter away from liquids to prevent water from entering and causing a short circuit.
  • Unauthorized Modification: Do not disassemble or modify the product without authorization.

8. Specifications

Feature Detail
Item Type USB Adapter
Gender Male (USB-A to USB-C)
Data Transfer Speed Up to 10Gbps (USB 3.1 Gen 2)
Power Delivery Up to 3.0A (5V/3A, 9V/2A)
Casing Material High-precision aluminum alloy for fast heat dissipation
Dimensions (L x W x H) Approx. 1.49 x 0.59 x 0.27 inches (3.78 x 1.50 x 0.69 cm)
Package Weight 0.029 kg
Certifications CE, FCC, RoHS
Advanced USB 3.1 Transfer Speed diagram
Figure 7: Internal components and performance metrics, including a 56kΩ Pull-Up Resistor and 3.1 Chip for 10Gbps. Data transfer is 800% faster than USB 2.0 (up to 10Gbps), and power supply is 50% faster than USB 2.0 (up to 3.0A).

9. User Tips

  • For optimal performance, ensure both your host device and peripheral support USB 3.1 Gen 2 speeds.
  • Always insert the adapter and cables gently to avoid bending or damaging the connectors.
  • If experiencing slow speeds, try connecting the adapter directly to your device's USB-C port, avoiding additional hubs if possible.

10. Manufacturer and Support Information

10.1. Manufacturer

Company Name: Dongguan Yuanrongchuang Technology Co., Ltd.
Address: No. 607, Room 1209, Chang'an Section, Ta'an Road, Chang'an Town, Dongguan City, Guangdong Province, China
Email: 3667505107@qq.com
Telephone: +86 17879355792

10.2. EU Authorized Representative

Company Name: PROCONSEIL FR
Address: 8 bis rue Abel, 75012 Paris, France
Email: SophieDupont@proconseilfr.com
Telephone: +33 780843245

For further details or a downloadable version of this manual, please refer to the official user manual PDF: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.