XOSS G2 / G2+

Contents

XOSS G2 / G2+ GPS Bike Computer

User Instruction Manual

1. Introduction

Thank you for choosing the XOSS G2 / G2+ GPS Bike Computer. This device is designed to provide accurate and comprehensive cycling data to enhance your riding experience. Please read this manual carefully before using the product to ensure proper operation and maintenance.

XOSS G2 and G2+ models side-by-side, showing their displays and the XOSS logo.

Figure 1: XOSS G2 and G2+ Models

Model Differences:

  • XOSS G2: Basic GPS bike computer, no connection to external sensors (heart rate monitor, speed/cadence sensors).
  • XOSS G2+: Advanced GPS bike computer, supports connection to ANT+ and BLE sensors (heart rate monitor, speed sensor, cadence sensor, speed/cadence sensor).

2. What's in the Box

Please check the contents of your package. If any items are missing or damaged, contact your retailer.

  • XOSS G2 or G2+ GPS Bike Computer x 1
  • Cycling Computer Mount x 1
  • Type-C USB Cable x 1
  • Protection Rubber Pad x 1
  • Rubber Band x 2
  • User Manual x 1
XOSS G2+ bike computer with all included accessories: silicone cover, screen film, lanyard, USB cable, mount, and rubber rings.

Figure 2: Package Contents (G2+ shown)

3. Product Overview

Device Layout and Buttons:

  • Left Button:
    • Long Press: End recording
    • Short Press: Start / Pause / Resume recording
  • Right Button:
    • Long Press: Power On / Off
    • Short Press: Switch data display pages

Display Features:

The XOSS G2 / G2+ features a clear display that can show up to 10 data items on one page (G2+). It includes an auto-backlit function for visibility in low-light conditions.

XOSS G2+ display showing 10 data fields: Clock, Speed, Heart Rate, Time, Calorie, Temperature, Grade, Cadence, Distance, Altitude.

Figure 3: 10 Data Items on One Page

Key Features:

  • 2.2" Screen: Clear and easy-to-read display.
  • Auto Backlit: Automatically lights up at night for better visibility.
  • ANT+/BLE Sensor Support (G2+ only): Connects to heart rate, cadence, and speed sensors.
  • 3 GPS System: Utilizes BDS II / BDS III / GPS / QZSS for accurate positioning.
  • IPX7 Waterproof: Designed to prevent water ingress, suitable for riding in various weather conditions.
  • 28 Hours Battery Life: Long-lasting battery, rechargeable via Type-C USB.
  • XOSS App Integration: Professional app for ride data analysis, synchronization with Strava and TrainingPeaks.

Video 1: XOSS G2+ Features Overview

4. Setup

4.1. Device Installation

  1. Place the protection rubber pad on the back of the bike computer mount.
  2. Use the provided rubber bands to securely attach the mount to your bicycle's handlebar or stem.
  3. Align the tabs on the back of the XOSS bike computer with the grooves on the mount. Press down slightly and rotate the device 90 degrees until it locks securely into place.

4.2. Initial Power On & GPS Positioning

  1. Power On: Long press the Right Button to turn on the device.
  2. GPS Search: Short press the Left Button to start searching for GPS signals. The GPS icon will appear and start flashing.
  3. Acquire Signal: For initial setup or after moving to a new location, stay still for a few minutes in an open, barrier-free outdoor area to allow the device to acquire a stable GPS signal. The GPS icon will stop flashing and emit a BEEP prompt when the signal is ready.

4.3. Connecting to XOSS APP

The XOSS App allows you to manage settings, view ride data, and synchronize with third-party platforms.

  1. Download the XOSS App from Google Play Store or Apple App Store.
  2. Ensure Bluetooth is enabled on your smartphone and on your XOSS G2 / G2+ device.
  3. Open the XOSS App, navigate to Devices > Bike Computers, and select your XOSS G2 / G2+ from the list.
  4. Once connected, you can access settings to customize: Backlight, Key Tone, Auto Pause, Speed Alert, Tire Circumference, Units, Time Zone, etc.
  5. Your workout data will automatically synchronize to the XOSS App after each ride.
Screenshots of the XOSS app interface showing device connection, ride summary, and synchronization options with Strava and TrainingPeaks.

Figure 4: XOSS App Interface

4.4. ANT+ Sensor Connection (XOSS G2+ only)

The XOSS G2+ supports connection with external ANT+ and BLE sensors for heart rate, cadence, and speed. (Note: Power meters are not supported).

  1. Ensure your external sensors are active and within 3 meters of your XOSS G2+. Keep away from other riders' sensors (at least 10 meters) to avoid interference.
  2. On your XOSS G2+, press both the Left and Right Buttons simultaneously. The sensor icon will flash, indicating it is searching for active sensors.
  3. Once pairing is successful, the sensor icon will become static.
  4. Press the Right Button again to exit the sensor search mode and proceed to device settings.

4.5. Device Settings (Without App)

You can adjust key settings directly on the device after sensor pairing or by navigating through the settings menu.

  1. Tire Circumference Setting (mm):
    • Use the Left Button to adjust the numbers.
    • Use the Right Button to switch between digit positions.
    • Long press the Right Button to confirm and move to the next setting.
  2. Metric/Imperial Unit Setting:
    • Use the Left Button to toggle between Metric (km/h, km) and Imperial (mph, miles) units.
    • Long press the Right Button to confirm and move to the next setting.
  3. Time Zone Setting:
    • Use the Left Button to adjust the time zone offset.
    • Use the Right Button to switch between digit positions.
    • Long press the Right Button to confirm and exit settings.

5. Operating Instructions

5.1. Starting and Ending a Ride

  1. Start Recording: Once GPS is acquired (icon static), short press the Left Button to start recording your ride data.
  2. Pause/Resume: During a ride, short press the Left Button to pause recording. Short press it again to resume.
  3. End Recording: At the end of your ride, long press the Left Button to save the workout. The device will then return to its initial interface.

5.2. Data Display

The XOSS G2 / G2+ can display up to 24 types of cycling data. Short press the Right Button to cycle through different data display pages during your ride.

Common Data Types:

  • Current: Speed (SPD), Heart Rate (HR), Cadence (CAD), Grade (GRD)
  • Time & Distance: Moving Time (TIME), Distance (DIST), Total Time (TOTAL)
  • Altitude & Calories: Elevation (ELEV), Calories (CAL)
  • Average: Average Speed (AVG SPD), Average Heart Rate (AVG HR), Average Cadence (AVG CAD)
  • Maximum: Max Speed (MAX SPD), Max Heart Rate (MAX HR), Max Cadence (MAX CAD), Max Elevation (MAX ELEV)
  • Other: Odometer (ODO), Estimated Power (PWR(e)), Temperature (TEMP)

5.3. Managing Workouts (via XOSS App)

  1. Connect your XOSS G2 / G2+ to the XOSS App.
  2. Go to Storage > Workout.
  3. You can view a list of your recorded workouts. Tap 'Edit' to select specific workouts for deletion or to resynchronize them with the app or connected third-party platforms.

6. Maintenance

6.1. Charging

The XOSS G2 / G2+ is equipped with a 500mAh rechargeable lithium battery, providing up to 28 hours of battery life. Use the provided Type-C USB cable to charge the device.

Close-up of the XOSS G2+ showing the Type-C charging port with a cable plugged in.

Figure 5: Type-C Charging

During charging, the battery icon in the upper right corner of the display will animate from empty to full. When the icon shows three solid bars and is no longer flashing, charging is complete.

6.2. Waterproofing

The device has an IPX7 waterproof rating, meaning it can withstand immersion in water up to 1 meter for 30 minutes. It is suitable for use in rain and wet conditions, but avoid prolonged submersion.

6.3. Firmware Upgrade

XOSS regularly releases firmware updates to improve performance and add new features. When a new firmware version is available, the XOSS App will prompt you to update. It is recommended to keep your device's firmware up to date.

If you encounter issues during the firmware upgrade (e.g., getting stuck in DFU mode), try toggling your smartphone's Bluetooth off and on, then reconnect to the XOSS App and attempt the upgrade again.

7. Troubleshooting

  • Device not turning on: Ensure the battery is charged. Connect to a power source and try again.
  • GPS signal not acquired: Move to an open outdoor area with a clear view of the sky. Remain stationary for a few minutes. Ensure you are not indoors or under heavy cover.
  • Device not connecting to XOSS App:
    • Ensure Bluetooth is enabled on both your smartphone and the XOSS device.
    • Restart both the device and your smartphone.
    • Make sure the XOSS App has Bluetooth permissions.
    • Ensure the device is not already connected to another phone.
  • ANT+ sensors not connecting (G2+):
    • Ensure sensors are active and have fresh batteries.
    • Bring sensors close to the G2+ (within 3m) and initiate sensor search on the G2+.
    • Avoid interference from other cycling computers or sensors nearby.
  • Data not syncing to Strava/TrainingPeaks: Ensure your XOSS App is connected to these platforms in the app settings and that data synchronization is enabled. Check your internet connection.

8. Specifications

Feature Specification
Model XOSS G2 / G2+
Display Size 2.2 inches
Dimensions 71mm x 48mm x 19.1mm
Weight 42g
Battery 500mAh Rechargeable Lithium Battery
Battery Life Up to 28 hours
Charging Interface Type-C USB
Waterproof Level IPX7
Operating Temperature -10°C ~ 50°C
Wireless Transmission BLE 5.0
ANT+ Sensor Support (G2+ only) Heart rate monitor, Speed sensor, Cadence sensor, Speed/Cadence sensor
GPS System BDS II / BDS III / GPS / QZSS
Barometric Altimeter Yes
Auto Pause Yes
Auto Backlight Yes
App Support XOSS App
Third-party Platforms Strava, TrainingPeaks
Certification CE, FCC, RoHS

9. User Tips

  • Initial GPS Lock: For the first use or after traveling a long distance, it might take a few minutes longer to acquire GPS. Be patient and stay still in an open area.
  • Sensor Pairing (G2+): If you have multiple sensors, pair them one by one, ensuring only the sensor you want to pair is active and close to the device.
  • Battery Life: To maximize battery life, ensure auto-backlight is set to a reasonable duration and avoid unnecessary sensor connections if not needed.
  • Data Accuracy: For best speed and distance accuracy, especially in areas with poor GPS signal (e.g., dense forests, tunnels), consider using a speed sensor (G2+ only).

10. Warranty and Support

Warranty Information:

The XOSS G2 / G2+ comes with a one-year free warranty from the date of purchase. Please retain your proof of purchase. For warranty service, contact your original dealer.

Warranty Exclusions:

The warranty does not cover:

  • Normal aging and wear of the battery.
  • Damage or loss due to improper installation or use.
  • Damage caused by abnormal use, such as exposure to extreme temperatures or water damage beyond IPX7 rating.
  • Damage resulting from self-dismantling or unauthorized maintenance.

Support:

For further assistance, product information, or frequently asked questions, please visit the official XOSS support websites:

© 2024 XOSS. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.