MatSee Plus PJ-1103C

Contents

MatSee Plus Tuya Smart Life WiFi Energy Bidirection Meter User Manual

Model: PJ-1103C

1. Introduction

The MatSee Plus Tuya Smart Life WiFi Energy Bidirection Meter (Model PJ-1103C) is a smart device designed to monitor AC electricity consumption and generation. It provides real-time data, historical statistics, and alarm functions through the Smart Life or Tuya Smart mobile application. This meter supports bidirectional measurement, making it suitable for homes with solar panels to track both consumed and produced power. It is available in 1-channel and 2-channel configurations.

MatSee Plus WiFi Energy Meter with two CT clamps
MatSee Plus WiFi Energy Meter (2-channel version) with current transformer (CT) clamps.
Dual Channel Electricity Energy Monitor options
Available in 1-channel and 2-channel configurations (Model PJ-1103C).

2. Safety Information

WARNING: Failure to follow these instructions may result in death or serious injury.

2.1. Safety Installation

  • The power clamp must be installed and serviced only by qualified electrical personnel.
  • Do not touch the terminals of the device during testing.
  • Turn off all power supply for this equipment before installing.
  • Make sure that the power supply is off before connecting or disconnecting it to an auxiliary device.
  • Always use a properly rated voltage sensing device to confirm power is off.
Electrical Safety Warning Symbol
DANGER: ELECTRIC SHOCK

2.2. Safety Handling

WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the Power Clamp and other property. Read all the safety notices below before using the Power Clamp.

  • Avoid high humidity or extreme temperatures.
  • Avoid long exposure to direct sunlight or strong ultraviolet light.
  • Do not drop or expose the unit to intense vibration.
  • Do not disassemble or try to repair the unit on your own.
  • Do not expose the unit or its accessories to flammable liquids, gases, or other explosives.

2.3. Uninstall the Clamp

WARNING: FOR SAFETY. If you need to remove the current transformer clamp, please be sure to turn off the power of the measuring device first, otherwise there is a risk of electric shock.

3. Technical Specifications

Feature Specification
Model PJ-1103C
Input Voltage AC 100-240V 50/60Hz
Measuring Range 0.2-80A
Wireless Frequency WiFi 2.4GHz (does not support 5GHz)
Error Within ±2%
Module Size 50*45*23mm
Clamp Diameter 10mm
Clamp Cable Length 1m
Ambient Temperature Range -10 °C ~ +50 °C
Certification CE, RoHS
App Name Tuya Smart, Smart Life
Channel Option 1 or 2 Channels
Direction Bidirectional 2 Way
New Function Set Threshold Value
Alarm App Alarm and Device Buzzer

4. Package Contents

The package typically includes:

  • MatSee Plus WiFi Energy Bidirection Meter (PJ-1103C)
  • Current Transformer (CT) Clamp(s) (quantity depends on 1-channel or 2-channel version)
  • User Manual (this document or a printed version)

5. Setup

5.1. Download the App

To control and monitor your energy meter, download the 'Smart Life' or 'Tuya Smart' application on your smartphone or tablet.

  1. Scan the QR codes below using your device's camera or a QR code scanner app.
  2. Alternatively, search for 'Smart Life' or 'Tuya Smart' in your device's App Store (iOS), Google Play Store (Android), or other Android Marketplaces.
  3. Install the application and create an account if you don't already have one.
QR codes for Smart Life and Tuya Smart apps
Scan to download Smart Life or Tuya Smart app.

5.2. Add the WiFi Meter to the App

  1. Ensure your mobile device is connected to a 2.4 GHz Wi-Fi network. The meter does not support 5 GHz Wi-Fi.
  2. Power on the energy meter.
  3. Press and hold the reset button on the meter for approximately 5 seconds until the red indicator light flashes quickly. This indicates the device is in pairing mode.
  4. Open the Smart Life or Tuya Smart app.
  5. Tap the '+' icon in the top right corner to add a device.
  6. The app may automatically detect the new device. If not, select 'Electrical' > 'Smart meter (Wi-Fi)' or search for 'WiFi dual meter'.
  7. Confirm that the indicator light is flashing quickly in the app.
  8. Enter your 2.4 GHz Wi-Fi network password when prompted.
  9. Wait for the device to connect. Once successfully added, click 'Done'.
App screenshot showing Wi-Fi selection for adding device
Select your 2.4 GHz Wi-Fi network and enter the password.
App screenshot confirming device pairing
Confirm pairing and click 'Done' to finish adding the device.

5.3. Wiring Diagram

Proper wiring is essential for accurate measurement and safe operation. Ensure all power is OFF before proceeding with wiring.

Note: When installing, please ensure that the circuit measured by the Current Transformer (CT) is in the same phase as the circuit powered by the module.

5.3.1. To Measure Energy Consumption and Energy Generation

This setup is ideal for monitoring both the power consumed from the grid and the power generated by sources like solar panels.

Wiring diagram for energy consumption and generation
Wiring diagram for measuring energy consumption and generation. Connect the meter's L and N terminals to the AC supply. Connect the CT clamps (S1, S2) around the live wires of the circuits you wish to monitor (e.g., load and solar inverter output).

5.3.2. To Measure 'from Grid' or 'to Grid'

This configuration focuses on the net energy flow between your premises and the utility grid.

Wiring diagram for measuring energy flow from grid or to grid
Wiring diagram for measuring energy flow from/to the grid. The CT clamps are placed on the main incoming/outgoing lines to monitor the overall energy exchange.

5.3.3. Wiring Demonstration Video

Watch this video for a visual guide on connecting the meter and CT clamps.

Video demonstrating the setup and app integration of the WiFi energy meter.

6. Operation

6.1. Monitoring Electricity Usage

Once the meter is installed and connected to the app, you can monitor various electricity parameters:

  • Real-time Data: View current voltage, total power, frequency, active power, current, and power factor for each channel.
  • Energy Statistics: The app provides daily, monthly, and yearly energy consumption/generation statistics in kWh.
App screenshots showing daily, monthly, and yearly electricity statistics
App interface displaying electricity statistics over different time periods (Day, Month, Year).

6.2. Forward and Reverse Energy Measurement

The meter supports bidirectional measurement. The direction of the CT clamp determines whether the app displays 'Generating power' or 'Consuming energy'.

  1. If you have solar panels and they are generating power, adjust the clamp's direction until the app shows 'Generating power'.
  2. If your solar panels are not working or you are only monitoring consumption, adjust the clamp's direction until the app shows 'Consuming energy'.
  3. Perform this adjustment for each channel independently.
App screenshots demonstrating 'Generating power' and 'Consuming energy' displays
App views showing 'Generating power' and 'Consuming energy' based on CT clamp orientation.
App screenshots showing 'Consuming energy' and 'Generating power' based on clamp direction
Detailed app views illustrating the effect of CT clamp direction on energy display.

6.3. Alarm and Report Rate Setting

The meter features a buzzer and app notifications for various alarms.

  1. Navigate to the 'Setting' section within the device interface in the app.
  2. You can set thresholds for:
    • Over power (Channel A and B)
    • Over voltage
    • Under voltage
    • Over current (Channel A and B)
  3. Toggle the buzzer on/off for audible alerts from the device.
  4. Adjust the 'Report rate setting' to change how frequently data is updated in the app. The default is 10 seconds.
App screenshots for setting alarm thresholds
App interface for configuring alarm thresholds and report rate.
App screenshots for setting alarm thresholds
App interface for configuring alarm thresholds and report rate.

6.4. Alarm History

The app keeps a record of all triggered alarms.

  1. In the 'Setting' section of the device interface, select 'Alarm history'.
  2. View a chronological list of past alarms, including the type of alarm and timestamp.
App screenshot showing alarm history
Alarm history log within the app.

7. User Tips

  • Home Assistant Integration: While not officially supported by Tuya Cloud for Home Assistant, some users have successfully integrated the device using tuya-local integration.
  • Wi-Fi Reception: The device generally has excellent Wi-Fi reception, even when installed inside electrical boxes.
  • Buzzer Functionality: The buzzer alarm for exceeding power thresholds works effectively and can be a useful immediate alert.
  • Channel Naming: Currently, the app does not allow custom naming for Channel A and Channel B. They will appear as 'Channel A' and 'Channel B' in the interface.
  • Energy Data: The app provides daily, monthly, and yearly energy curves and total kWh for each channel. While daily totals are available, some users note that the graphs might show reductions in energy values, which is not typical for cumulative energy.

8. Troubleshooting

8.1. Q&A: Current and Power Show '0' in App

Q: After I configure it with the App, why does the App show 'the Current and Power as '0''?

A: The meter will only sense current and display values if a device's live wire (or neutral wire, but not both) is correctly placed within the CT clamp, and the device is turned on. Ensure the wire is properly clamped and the connected appliance is active.

App screenshot showing zero current/power and a diagram of a single wire through the clamp
Ensure only one wire (live or neutral) passes through the CT clamp for accurate readings.

8.2. Q&A: App Appears Stuck After Changing Report Rate

Q: After I change the report rate to less than 10 seconds, why does my App seem stuck?

A: This can occur if the network return is too slow. Please sign out of the App and re-enter. Change the report rate back to 10 seconds. This should resolve the issue.

App screenshots for report rate setting
Access report rate settings in the app to adjust data update frequency.

8.3. Q&A: How to Clear App Electricity Data

Q: How can I clear the electricity data stored in the App?

A: Follow these steps to clear the data:

  1. Quickly press the reset button on the meter 5 times. The indicator LED should blink quickly. If it doesn't, repeat the action until it blinks quickly.
  2. After approximately 10 seconds, go to the device's page in the Smart Life/Tuya Smart app.
  3. Navigate to the device settings (often by tapping the pencil icon or '...' in the top right).
  4. Scroll down and select 'Disconnect and wipe data'.

8.4. Q&A: Which Application is Needed?

Q: Which application is needed?

A: The MatSee Plus WiFi Energy Bidirection Meter uses either the 'Smart Life' or 'Tuya Smart' application, both available on App Store and Google Play.

8.5. Q&A: DC Measurement

Q: Can it measure DC current?

A: No, this device is designed for AC (Alternating Current) measurement only, with an input voltage range of AC 100-240V.

8.6. Q&A: Alexa/Google Home Compatibility

Q: Is it compatible with Alexa?

A: Compatibility with voice assistants like Alexa or Google Home may vary and typically relies on the Tuya Smart or Smart Life app's integrations. Check the respective app's settings for available third-party integrations.

9. Warranty and Support

For detailed warranty information and further technical support, please refer to the official product documentation or contact the seller directly.

A digital version of the user manual is available:

View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.