dawndesslo Heated Car Seat Cushion

Contents

12V Car Seat Heated Cover User Manual

Model: Heated Car Seat Cushion | Brand: dawndesslo

Introduction

Thank you for purchasing the dawndesslo 12V Car Seat Heated Cover. This product is designed to provide warmth and comfort during cold weather, suitable for various vehicles. This manual provides essential information for safe and effective use of your heated seat cushion.

Safety Information & Warnings

Please read all instructions carefully before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Fire Risk: Strictly follow the instruction manual for charging and storage. Do not use if the product or its wiring is damaged.
  • Power-off Insulation Protection: The product features power-off insulation protection.
  • Electrical Product: Do not expose to water or moisture.
  • General Safety: Inspect the product before each use. Do not use if damaged.
  • Intended Use: Do not use this product for purposes other than its intended use (car seat heating).
  • Installation: Follow installation and operation guidelines to avoid injury.
  • Maintenance: Carry out checks and maintenance of the main parts (fixings, anchorages, etc.) at regular intervals.
  • Children: Keep the device and its cord out of reach of children under 3 years old. Keep away from children unless supervised by an adult.
  • Traffic Use: Not to be used in traffic in a manner that obstructs driving or safety.

This product is CE compliant, indicating it meets European safety, health, and environmental protection requirements. Dispose of electrical and electronic equipment responsibly, in accordance with local regulations (WEEE symbol).

Product Features

Diagram highlighting five key features of the heated seat cover
Figure 1: Key features of the heated seat cover.
  • High-Quality Construction: Made with durable and comfortable materials, including breathable fabric and three layers of thickened sponge for softness.
  • Rapid Heating: Designed for quick heat-up, providing immediate warmth.
  • Adjustable Temperature: Features 3-gear adjustable temperature control, allowing you to choose between high, low, or your desired heat setting.
  • Universal Fit: Suitable for various car and RV seat sizes.
  • Versatile Power: Equipped with a cigarette lighter interface for use in cars, motorcycles, and as a portable heating pad for camping or office use.
  • Safety Features: Incorporates resistive wire heating and power-off insulation protection.

Setup Instructions

  1. Unpack: Carefully remove the heated seat cover from its packaging. If there is a protective film, gently tear it off before use.
  2. Positioning: Place the heated seat cushion securely on your car seat. Ensure it lies flat and does not interfere with seat belts or other safety mechanisms. The silicone non-slip bottom helps keep it in place.
  3. Connect Power: Insert the cigarette lighter plug firmly into your vehicle's 12V power outlet.
  4. Secure (Optional): If your seat cover includes additional straps or hooks, use them to further secure the cushion to prevent movement during driving.
Heated seat cover with cigarette lighter plug
Figure 2: Heated seat cover with cigarette lighter plug for power connection.

Operating Instructions

  1. Start Heating: Once connected to the 12V power outlet, the heating element will begin to warm up.
  2. Adjust Temperature: Use the 3-gear adjustable temperature control switch (typically located on the power cord) to select your desired heat level (High, Low, or Off).
  3. Enjoy Warmth: The cushion will rapidly heat up, providing comfort.
  4. Turn Off: When not in use or when leaving the vehicle, ensure the switch is set to 'Off' and disconnect the cigarette lighter plug from the power outlet.
Heated seat cover in use, showing rapid heating
Figure 3: Visual representation of the heated seat cover providing rapid warmth.

Maintenance

  • Cleaning: Disconnect the power before cleaning. Wipe the surface with a damp cloth. Do not immerse the cushion in water or machine wash.
  • Storage: Store the seat cover in a dry place when not in use. Avoid folding it tightly or placing heavy objects on it to prevent damage to the heating elements.
  • Inspection: Periodically check the power cord and plug for any signs of wear or damage. If any damage is found, discontinue use immediately and contact customer support.

Troubleshooting

  • No Heat:
    • Ensure the cigarette lighter plug is fully inserted into the 12V power outlet.
    • Check if your vehicle's 12V outlet is functioning (e.g., by testing with another device).
    • Verify the temperature control switch is set to 'High' or 'Low', not 'Off'.
    • Inspect the power cord for any visible damage.
  • Uneven Heating:
    • Ensure the cushion is spread flat on the seat without any folds or creases that might impede heat distribution.
  • Cushion Slides:
    • Ensure the cushion is properly positioned. The silicone non-slip bottom is designed to minimize movement.
    • If available, use any securing straps to fasten the cushion to the seat.

If you experience persistent issues not covered here, please contact the manufacturer for support.

Specifications

Attribute Value
Origin Mainland China
Material Type PU
Filling Memory Foam
Applicable Season Autumn And Winter
Set Piece 1
Special Features Heating
Surface Material Polyester Fibre
Bottom Material Silicone Non-slip Bottom
Color Options Black, Grey, Blue, Red
Rated Voltage 12 V
Power 15W
Rated Current 2A ± 10%
Maximum Temperature 55°C ± 5°C
Size 43cm x 43cm (16.93 x 16.93 inches)
Weight 0.23kg (200g as per description)
Application Scope Car, Home, Office, etc.

Note: Please allow 1-2cm measuring deviation due to manual measurement.

User Tips

  • For optimal warmth, pre-heat the cushion for a few minutes before sitting down.
  • Ensure the cushion is placed on a clean, dry surface to prevent slipping and ensure efficient heating.
  • If using in a non-vehicle setting (e.g., home or office), ensure you have a compatible 12V power adapter (not included).

Manufacturer Information & Support

Manufacturer: Wuhan Xiangyang E-Commerce Service Co., Ltd.

Address: No. 5, No. 25, Baofeng Road, Qiaokou District, Wuhan City-A361, China

EU Authorized Representative: E-CrossStu GmbH

Address: Mainzer Landstr.69, Frankfurt am Main, Hessen Germany

For any product-related inquiries or support, please contact the manufacturer directly.

A detailed user manual in PDF format is available for download. Please refer to the official product page or contact customer support for the link: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.