VTOMAN FlashSpeed1500 Extra Battery

Contents

VTOMAN FlashSpeed1500 Extra Battery User Manual

Model: FlashSpeed1500 Extra Battery (PB-81)

VTOMAN FlashSpeed1500 Extra Battery

Image: VTOMAN FlashSpeed1500 Extra Battery unit.

Introduction

This manual provides essential instructions for the safe and efficient use of your VTOMAN FlashSpeed1500 Extra Battery. Please read this manual thoroughly before operating the product and retain it for future reference. This extra battery is designed to expand the capacity of your VTOMAN FlashSpeed1000 or FlashSpeed1500 Power Station.

Warnings and Precautions

Failure to follow these safety instructions may result in fire, electric shock, explosion, or other hazards.

  1. Read the manual carefully before using this product.
  2. Do not use other electronic products that exceed the battery specifications to avoid electric shock and product damage.
  3. Do not use damaged output cables or plug-in terminals to use the battery to avoid electric shock and product damage.
  4. Keep the battery dry; do not place it in water or damp places to avoid electric shock and product damage.
  5. Do not insert foreign objects into the input and output ports to avoid damage to the product.
  6. Keep the product under well-ventilated conditions.
  7. Prevent the product from falling from a height.
  8. Do not use it in an environment with too high or too low temperature, as it may cause product function failure, shorten lifespan, or damage.
  9. Do not expose the product to fire or a temperature higher than 140°F (60°C), otherwise it may cause the product to catch fire, explode, and other safety accidents.
  10. Do not expose the battery to rain, snow, frost, greasy, and other harsh environments, which may cause the product to fail, shorten its lifespan, or be damaged.
  11. Do not try to disassemble the battery or allow non-professional technical personnel to disassemble, otherwise it may cause unknown risks such as electric shock, fire, or even explosion.
  12. When not in use for a long time, charge the battery every 12 months to prevent insufficient power.
  13. Keep away from children to reduce possible risks.
  14. Under extreme conditions, battery leakage may occur. If your hands or other exposed parts of your body accidentally come into contact with them, wash them off with soap and water immediately. If they get into your eyes, immediately rinse your eyes with cold water for at least 10 minutes, and then seek medical attention immediately.
  15. Dispose of lithium battery products according to local laws and regulations at the end of the product life.

Product Function Overview

The VTOMAN FlashSpeed1500 Extra Battery features a minimalist design with essential indicators and connection ports.

VTOMAN FlashSpeed1500 Extra Battery with labeled components

Image: Diagram showing the FlashSpeed 1500 Extra Battery with its components labeled.

  • 1. Power check button: Press to check the battery level.
  • 2. Power indicator light: Displays the current battery charge status.
  • 3. CP3500 cable connection port: Used to connect to the main power station.

Setup and Connection

To use the FlashSpeed1500 Extra Battery, connect it to a compatible VTOMAN FlashSpeed Power Station (FlashSpeed1000 or FlashSpeed1500) using the provided CP3500 cable.

  1. Ensure both the extra battery and the power station are turned off before connecting.
  2. Locate the CP3500 cable connection port on both the extra battery and the main power station.
  3. Connect one end of the CP3500 cable to the extra battery's CP3500 port and the other end to the corresponding port on your VTOMAN FlashSpeed Power Station.
  4. Ensure the connection is secure.
VTOMAN FlashSpeed1500 Extra Battery connected to a power station

Image: The FlashSpeed 1500 Extra Battery connected to a FlashSpeed 1000 Power Station on a beach setting.

VTOMAN FlashSpeed1500 Extra Battery connected to a FlashSpeed 1500 Power Station, illustrating capacity increase

Image: The FlashSpeed 1500 Extra Battery connected to a FlashSpeed 1500 Power Station, demonstrating how it increases total capacity.

Operating Instructions

Once connected, the extra battery integrates seamlessly with your VTOMAN FlashSpeed Power Station. Here's how it operates:

Output Priority (without charger plugged in):

  • The extra battery has output priority.
  • When the power of the extra battery is exhausted, it will automatically switch to the main battery to continue output without interruption.

Charging and Discharging (simultaneous):

  • If the main battery is not full, it will be charged and discharged first.
  • Once the main battery is fully charged, the system will automatically switch to the extra battery for charging and discharging.

Power Display:

  • When charging: The main battery's display shows its remaining power. The extra battery's display shows its own remaining power.
  • When discharging: The main battery's display shows the combined power of the main battery plus the secondary battery. The extra battery's display shows its own power.

Note: When the main and extra battery are working, do not directly cut off the connection between them, as this may cause the current output to be interrupted.

VTOMAN FlashSpeed1500 Extra Battery charging with power station

Image: The FlashSpeed 1500 Extra Battery connected to a FlashSpeed 1500 Power Station, both being charged from a wall outlet.

Maintenance

  • Keep the battery dry and clean. Avoid exposure to water, rain, snow, frost, or greasy environments.
  • Store the product in a well-ventilated area.
  • If not used for a long period (e.g., 12 months), charge the battery to prevent insufficient power.
  • Avoid dropping the product or subjecting it to extreme temperatures.
  • Do not attempt to disassemble or modify the battery.

Troubleshooting

Refer to the table below for common issues and their solutions.

Trouble Phenomenon Troubleshooting Solution
The product cannot be charged 1. The product input interface is not connected well, and the charging indicator light is off. Reconnect the product input interface.
2. The connection is good, but the charging indicator does not light. The charger is damaged. Contact after-sales service.
3. The charging indicator is on, but cannot be charged. If the product is damaged, please contact after-sales service.
The product cannot be output 1. The main battery and the extra battery are not properly connected. Connect the main battery and extra battery correctly.
2. The battery is too low. Use the main battery with a charger to charge it.
3. The power of the equipment exceeds the scope of application of this product. Replace the product with a larger power battery or reduce the load power.
4. Tried all of the above and failed to eliminate the fault. The product is damaged, please contact the after-sales service.
The output is interrupted during use 1. The power of the equipment exceeds the scope of this product. Replace the product with a larger specification.
2. The power of the device is too small, causing the product to fail to identify. Automatically turn off the output. Restart.
3. Tried all of the above and failed to eliminate the fault. The product is damaged, please contact the after-sales service.

Technical Specifications

Parameter Value
Product Name FlashSpeed 1500 Extra Battery
Model No. PB-81
Battery Capacity 1548Wh
Battery Type LiFePO4
Operating Temperature -20°C to 55°C (-4°F to 131°F)
Charging Temperature 0°C to 55°C (32°F to 131°F)
Product Weight 12.8KG
Product Size 42x29.6x25.5cm
Application Home Energy
Nominal Capacity >3500mAh
Certification CE, FCC, RoHS, UL

Packing List

The following items are included in your product package:

  • FlashSpeed 1500 Extra Battery x1
  • CP3500 cable x1
  • User manual x1
Contents of the VTOMAN FlashSpeed1500 Extra Battery package

Image: The FlashSpeed 1500 Extra Battery, CP3500 cable, and user manual.

User Tips

  • Upon receiving the extra battery, check the charge level. Many units arrive partially charged (e.g., three out of four LEDs lit).
  • Ensure the CP3500 cable is securely connected to both the extra battery and the main power station for optimal performance.
  • If you experience issues with charging or output, first verify all cable connections before proceeding with other troubleshooting steps.
  • For questions regarding compatibility with other VTOMAN power stations (e.g., VTOMAN Jump 1000W or VTOMAN 2200W), refer to the official product specifications or contact customer support.

Warranty Information

  • The VTOMAN FlashSpeed1500 Extra Battery comes with a 24-month warranty.
  • The warranty period begins from the date of purchase by the original customer.
  • For warranty claims or after-sales service due to quality issues, customers must provide proof of purchase or other valid information.

Support and Further Information

For detailed information, additional diagrams, or specific inquiries not covered in this manual, please refer to the comprehensive PDF user manual available online:

View Full User Manual (PDF)

You can also contact VTOMAN customer support for assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.