1. Introduction
The FENVI I226 2.5Gbps PCIe Network Card is designed to upgrade your desktop computer's network connectivity to 2.5 Gigabit Ethernet speeds. Featuring the Intel I226 chip, this adapter provides stable, high-speed wired network performance for demanding tasks such as online gaming, 4K UHD video streaming, and high-speed server transmission. It is compatible with various PCI Express slots and supports modern Windows operating systems.

Figure 1: FENVI I226 2.5Gbps PCIe Network Card
2. Package Contents
Please check the package contents upon unboxing. If any items are missing or damaged, contact your retailer.
- 1x FENVI I226 2.5Gbps PCIe Network Card
- 1x Standard-height bracket (pre-installed or included)
- 1x Low-profile bracket (for small form factor PCs)

Figure 2: Network Card with included brackets
3. Setup and Installation
Before installation, ensure your computer is powered off and unplugged from the power outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage.
3.1 PCIe Slot Compatibility
The FENVI I226 Network Card is compatible with PCI Express X1, X4, X8, and X16 slots.

Figure 3: PCIe Slot Compatibility
3.2 Bracket Replacement (Optional)
If your computer case requires a low-profile bracket (e.g., small form factor PCs, HTCP, or 2U chassis), you will need to replace the pre-installed standard-height bracket with the included low-profile bracket. Use a small Phillips screwdriver to remove the screws securing the bracket to the card, then attach the appropriate bracket.

Figure 4: Bracket options for different PC cases
3.3 Installation Steps
- Open the PC Case: Carefully open the side cover of your computer case.
- Locate an Available PCIe Slot: Identify an empty PCI Express slot (X1, X4, X8, or X16) on your motherboard.
- Remove Slot Cover: Remove the metal slot cover (case stopper) corresponding to the chosen PCIe slot.
- Insert the Network Card: Align the network card with the PCIe slot and firmly press it down until it is fully seated. Ensure the gold-plated fingers are completely inserted into the slot.
- Secure the Card: Use a screw to fix the card's bracket to the computer case chassis.
- Close the PC Case: Replace the side cover of your computer case.

Figure 5: Installation Method

Figure 6: Network Card installed in a PC
4. Operating Instructions
4.1 Driver Installation
After physical installation, power on your computer. The FENVI I226 Network Card is designed to be compatible with Windows 10 and Windows 11. Modern Windows operating systems often have built-in drivers for the Intel I226 chip or can automatically download and install them upon detecting new hardware.
- Automatic Installation: In most cases, Windows will detect the new hardware and install the necessary drivers automatically.
- Manual Verification: To verify the driver installation, open Device Manager (right-click on the Start button and select "Device Manager"). Look under "Network adapters" for an entry related to "Intel(R) Ethernet Controller I226-V" or similar. If there is a yellow exclamation mark, you may need to update the driver.
- Driver Update: If needed, you can right-click on the device in Device Manager and select "Update driver" or download the latest drivers from the official Intel website.

Figure 7: Operating System Support (Windows 10/11)
4.2 Network Connection
Once the drivers are installed, connect a standard RJ45 Ethernet cable from your router or network switch to the RJ45 port on the FENVI I226 Network Card. The network connection should become active.
5. Maintenance
- Keep Clean: Periodically clean your computer's interior to prevent dust buildup on the network card's heatsink, which can affect thermal performance. Use compressed air for cleaning.
- Ensure Airflow: Ensure your PC case has adequate airflow to prevent overheating of internal components, including the network card.
- Avoid Physical Damage: Handle the card with care and avoid subjecting it to physical shocks or excessive force.
6. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Network card not detected by the system. |
|
| No network connection after installation. |
|
| Network speeds are slower than expected (not reaching 2.5Gbps). |
|
7. Specifications
| Feature | Description |
|---|---|
| Model Name | I226 |
| Chipset | Intel I226-V |
| Interface | PCI Express (PCI-E) |
| PCIe Compatibility | X1, X4, X8, X16 slots |
| Network Port | 1x RJ45 (Ethernet) |
| Transmission Rate | Up to 2.5Gbps (2500Mbps) |
| Applicable Network Type | 2.5 Gigabit Ethernet, Gigabit Ethernet, Fast Ethernet |
| Application | Desktop PC |
| Operating System Support | Windows 10, Windows 11 |
| Heat Dissipation | Integrated Heatsink |
| Features | Gold-Plated Fingers, Metal Retainer for durability |
| Brackets Included | Standard-height (12cm) and Low-profile (8cm) |

Figure 8: Key Features of the Network Card
8. User Tips
- Broad Compatibility: Users have reported excellent compatibility with various motherboards, including older chipsets (e.g., H97).
- OS Recognition: The card is often recognized automatically by operating systems like Windows and Linux-based systems (e.g., TrueNAS), simplifying setup.
- Maximize Performance: To fully utilize the 2.5Gbps speed, ensure your entire network infrastructure (router, switch, and Ethernet cables) also supports 2.5 Gigabit Ethernet. Cat5e or Cat6 cables are generally sufficient for 2.5Gbps over typical home distances.
9. Warranty and Support
For warranty information, technical support, or any inquiries regarding your FENVI I226 2.5Gbps PCIe Network Card, please refer to the seller or retailer from whom you purchased the product. Keep your proof of purchase for warranty claims.