JENNOV P87HM85-30X-EAS

Contents

Jennov 4K 8MP Outdoor PTZ IP POE Camera User Manual

Model: P87HM85-30X-EAS

1. Introduction

Thank you for choosing the Jennov 4K 8MP Outdoor PTZ IP POE Camera. This manual provides detailed instructions for the installation, operation, and maintenance of your security camera. Please read this manual carefully before use and keep it for future reference.

The Jennov P87HM85-30X-EAS is a high-performance 4K 8MP PTZ (Pan-Tilt-Zoom) IP camera designed for both indoor and outdoor surveillance. It features 20X optical zoom, human detection, 320ft IR night vision, and is compatible with Hikvision and Onvif protocols, making it a versatile solution for your security needs.

Jennov 4K 8MP PTZ IP POE Camera product shot

Jennov 4K 8MP PTZ IP POE Camera

2. Important Safety Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

3. Package Contents

Please check the package contents upon receipt to ensure all items are present and undamaged:

Product details and packing list diagram

Diagram showing product components and included accessories.

  • Jennov PTZ IP Camera
  • Bracket Base
  • Bracket
  • 1M Ethernet cable
  • User Manual
  • Waterproof Cap
  • 12V 2A Power Supply
  • Warning Sticker
  • Screws for installation

4. Setup and Installation

4.1. Physical Installation

The camera features an aluminum alloy shell and IP66 waterproof rating, making it suitable for both indoor and outdoor environments such as homes, garages, and factories. It is designed for wall-mounted installation.

Camera with 'Aluminum Alloy Shell & IP66 Waterproof' text, showing outdoor, garage, factory use cases.

The camera's robust design allows for versatile placement.

Refer to the installation diagram below for optimal placement and angle adjustment, especially for tracking cameras. The camera is suitable for low-density scenes like border defense, reservoirs, and forests. It is not recommended for high-traffic areas like stations or squares.

Camera Installation Diagram for tracking cameras, showing optimal height and range.

Installation Diagram for Tracking Cameras (Optimal height: 5-8m, Monitoring range: up to 50m, Target speed: 3-15Km/h).

NOTE: If the target distance is less than 3m or more than 50m, the tracking effect will be affected.

4.2. Single Camera Connection

For a standalone setup, connect the POE IP Camera to your router using an Ethernet cable. Ensure the camera is powered via the 12V 2A power supply.

Diagram for single camera connection to a router with power supply.

Single Camera Connection Diagram.

4.3. POE NVR Connection

The camera is compatible with 8MP POE NVRs that support Onvif protocol, including Hikvision and Dahua POE NVRs (Plug&Play). Connect the camera to the NVR, and the NVR to your PC/monitor and router.

Diagram for POE NVR connection, showing camera, NVR, router, PC, and monitor connections.

POE NVR Connection Diagram.

4.4. Software and App Download

To manage your camera, download the VideoLink software for PC or the VideoLink app for mobile devices.

  • PC Software: Visit www.jennov.com, navigate to "Support" > "Download File" > "M-Series" to download "VideoLink Guide Manual" and "VideoLink" software.
  • Mobile App: Search for "VideoLink" in Google Play Store (Android) or Apple App Store (iPhone), or scan the QR codes below.
QR code for Android VideoLink app QR code for iPhone VideoLink app

QR codes for VideoLink mobile app download.

4.5. Initial Setup: Check IP Address and Add Camera

  1. Power on the camera and plug in the network cable.
  2. Run the "VideoLink" software on your PC.
  3. Click "Start Search" to find the camera's IP address.
  4. Select the camera's IP address and click "Batch Modify IP".
  5. Select "DHCP" and click "OK".
  6. Important: Ensure the camera and your router are in the same network segment.

  7. In the VideoLink software, go to "Devices" and click "Start Search" again.
  8. Select the discovered device and click "Add".
  9. For app setup, register a personal account in the VideoLink app. Click "Add New device" and select "Lan" to scan the QR code on the camera.
Screenshot of VideoLink software showing IP address search and modification.

VideoLink software interface for IP address management.

Screenshot of VideoLink app showing device login and add new device options.

VideoLink app interface for device setup.

5. Operating Instructions

5.1. Live View and PTZ Control

Once the camera is added, you can access the live view through the VideoLink software or app. Right-click on the camera feed in the software to access the menu functions like Stream, PlayMode, Record, Audio, Intercom, etc.

The camera supports Pan 355° and Tilt 90° movement, allowing for wide area coverage.

Demonstration of Pan 355° and Tilt 90° movement.

5.2. Optical Zoom

The camera features a powerful 20X optical zoom (plus 10X digital zoom for a total of 30X zoom) to capture distant details with clarity. This allows you to zoom in on specific areas of interest without losing image quality.

30X Zoom capability (20X Optical + 10X Digital) demonstration.

Visual comparison of 1X, 10X, and 20X optical zoom.

Comparison of 4K 8MP vs 5MP vs 2MP resolution, showing license plate clarity.

Clarity of 4K 8MP resolution, demonstrating ability to read license plates.

5.3. Two-Way Audio

The built-in microphone and speaker enable two-way audio communication. You can listen to the environment around the camera and speak through the camera using the app or software.

Two-Way Audio feature demonstration.

Two-Way Audio in action, allowing communication with visitors.

5.4. IR Night Vision

The camera provides clear surveillance even in complete darkness with its 320ft (approximately 97.5 meters) IR night vision. It also supports color night vision for enhanced detail.

Demonstration of 320ft IR Night Vision.

5.5. AI Functions: Smart Tracking & Detection

The camera is equipped with advanced AI functions including Smart Tracking, Human Auto Tracking, and Vehicle Detection. These features allow the camera to automatically follow detected subjects and provide alerts.

  • Human Auto Tracking: The camera can automatically track human movement within its field of view.
  • Vehicle Detection: It can identify and track vehicles.
  • Alert Type: Audio and Motion alerts are supported.

Video demonstrating Human Auto Tracking and Vehicle Detection.

  1. Select the camera you want to set up in LiveView.
  2. In the PTZ Control section, enter command 92 at the preset option and click the arrow to save the settings. This will activate human tracking.
  3. To turn off tracking, enter command 94.

NOTE: Only model P87 supports this human tracking feature.

Screenshot of VideoLink software PTZ control with human tracking settings.

VideoLink software PTZ control interface.

The app interface allows for PTZ (Pan-Tilt-Zoom) control, screenshot, recording to mobile album, audio, resolution switch, split screen, adaptive screen, zoom in/out, and microphone control.

  1. In the app, navigate to the camera's live view.
  2. Click "Advanced Configuration".
  3. Click "Start Tracking" to activate.
  4. Click "Stop Tracking" to turn off.

NOTE: The operation interface of the APP may differ slightly for different models. Only model P87 supports this feature.

Screenshot of VideoLink app interface with PTZ and tracking controls.

VideoLink app interface for PTZ and tracking controls.

6. Maintenance

To ensure optimal performance and longevity of your Jennov camera, follow these general maintenance guidelines:

  • Cleaning: Regularly clean the camera lens and housing with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could scratch the lens or damage the finish.
  • Firmware Updates: Check the Jennov website (www.jennov.com) periodically for firmware updates. Keeping your camera's firmware up-to-date ensures you have the latest features and security patches.
  • Cable Inspection: Periodically inspect all cables (power and Ethernet) for any signs of wear, damage, or corrosion. Ensure connections are secure and waterproof caps are properly sealed for outdoor installations.
  • Environmental Conditions: While the camera is IP66 waterproof, extreme weather conditions (e.g., severe storms, prolonged sub-zero temperatures) can still impact performance. Ensure the camera is installed in a location that minimizes direct exposure to the harshest elements where possible.

7. Troubleshooting (FAQs)

7.1. General Issues

  • Q: Where can I find the reset button?
    1. The latest versions of the P87 camera are equipped with a reset button on the tail cord.
    2. The A76 camera is not equipped with a reset button.
    3. If your camera does not have an external reset button, you can reset the camera using software:
      • VideoLink: Click "Config" - "Factory Reset".
      • LMS: Right-click IP address - "Restore".
      • AjDevTools: Click "Start Search" - Tick the camera IP address - Click "Batch Reset".
  • Q: Are all functions in the IVS interface supported?

    A: In the IVS interface, only human detection is supported (only some dome PTZ cameras support human detection function). If you're unsure, please contact customer service.

  • Q: Why is my camera showing offline on the LMS?

    A: Download "AjDevTools" from www.jennov.com (Support > Download > M-series). Use "Start search" > "Batch Reset" > Right-click on your device and select "Login".

7.2. NVR Connection Issues

  • Q: How to add if NVR is Dual IP?
    1. Connect the Dual IP NVR to the monitor to check the camera IP address of the NVR port.
    2. Download the M-series software "AjDevTools".
    3. Connect the camera to your router and run the software on the computer to manually modify the IP address. If the IP address segment of the camera on the NVR port is 172.0.0.X, you need to manually modify the IP address of the camera to 172.0.0.X.
    4. Note: Do not conflict with the IP of other devices on the LAN.

    5. Enter NVR search and add.
  • Troubleshooting NVR Connection:

    NOTE: Before connecting the NVR, please first confirm whether the IP address of the camera has been manually modified to the same network segment as the NVR, otherwise you cannot watch!

  • Q: Camera IP cannot be searched after connection:
    1. Make sure your NVR is a national standard POE NVR. This camera only supports national standard POE power supply or DC 12V2A power supply. When the camera is normally powered on, it will automatically rotate as a self-check. If there is no rotation self-check, it means that the camera is not powered on.
    2. Make sure that the camera and NVR are in the same network segment, otherwise the camera IP cannot be searched. The modification method is as above.
  • Q: The camera IP is searched and connected successfully, but cannot be viewed:
    1. Check whether the protocol in NVR is Onvif. If not, change it to Onvif.
    2. The user name and password are incorrect. (Default Username: admin, Default Password: 123456)
    3. IP conflict with other camera in use.

P.S. Whether the functions of the camera are available depends on the NVR.

8. Specifications

Feature Specification
Brand NameJENNOV
JENNOV ModelP87HM85-30X-EAS
StylePT Camera
High Definition8.0 Megapixels (4K 3840*2160 pixel)
Lens (mm)4.6mm (20X Optical Zoom + 10X Digital Zoom)
ConnectivityWIFI, POE
Power ModeMains Electricity (12V 2A Power Supply)
Operating Temperature-10℃ to 60℃
IP RatingIP66 (Waterproof / Weatherproof)
SceneIndoor and outdoor
Movement Range (Pan)0°-360° (Pan 355°, Tilt 90°)
Color Night VisionYes
Night Vision Range320 feet
Audio OutputTwo Way Audio
Video Compression FormatH.264, H.265
Sensor BrandSony
Sensor TypeCMOS
Supported Operating SystemsWindows 7, Mac OS, Windows 10
AI FunctionsSmart Tracking
Alert TypeAudio and Motion
Smart Home PlatformAlexa, Google Assistant
Shell MaterialMetal
CertificationCE

9. User Tips

  • POE vs. Wireless: This camera is primarily a POE (Power Over Ethernet) camera, meaning it receives both power and data through a single Ethernet cable. While it supports WIFI connectivity, a stable wired POE connection is often recommended for optimal performance, especially for 4K streaming and PTZ functions.
  • Default Credentials: Remember that the default username is 'admin' and the default password is '123456' for initial setup. It is highly recommended to change these immediately after successful setup for security reasons.
  • Network Segment: A common issue during setup is the camera and NVR/router not being on the same network segment. Always double-check and modify IP addresses as needed using the AjDevTools software to ensure seamless communication.

10. Warranty and Support

Your Jennov camera comes with a 12-month warranty from the order date. To activate your warranty, please fill in the required information (Order Date, Order Number/ID, Buyer E-mail, Buyer Tel) on the warranty page (page 16 of the PDF manual) or scan the QR code provided in the manual. Take a picture of the completed form and send it to support@jennov.com.

For further assistance, please contact Jennov support:

You can also find a more detailed manual and operation guidance videos by scanning the QR codes on page 3 of the PDF manual, or by visiting the Jennov website.

The full user manual in PDF format can be viewed here.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.