Important Safety Instructions
Please read and understand all safety instructions before operating the Pecron 200W Foldable Solar Panel. Failure to follow these instructions may result in injury or damage to the product.
- Do not disassemble, repair, or modify the unit. Unauthorized decomposition, repair, or modification can prevent the product from functioning properly and may lead to complete failure.
- Do not connect the solar panel to medical equipment directly involved in human life or equipment that may cause personal injury. Use dedicated circuits for such applications.
- Do not use, maintain, or place the solar panel in hot environments, such as near a fire. This can cause fire, burns, injury, equipment deformation, malfunction, performance degradation, or a shorter lifespan.
- Keep the solar panel away from moisture and corrosive substances. Store it in a dry environment.
- Regularly clean the surface of the solar panel. When the surface is covered with dirt, sunlight cannot be fully received, leading to weak power generation. Wipe the surface with a soft, damp cloth to keep it clean.
- Do not drop objects on the smooth surface of the solar panel, as this may cause scratches.
- To ensure the light-receiving surface (board surface) of the solar panel receives sunlight for extended periods, position it towards the south. Avoid placing it in shadows caused by obstacles such as trees or poles.
Product Overview
The Pecron LL-YT 200W is a high-efficiency foldable monocrystalline solar panel designed to provide portable power for various outdoor activities, including camping, travel, and emergency backup. Its robust construction and IP67 waterproof rating ensure reliable performance in diverse environments.
Components


Panel Structure


Technical Specifications
| Parameter | Value |
|---|---|
| Model Number | LL-YT200W |
| Cell Type | Monocrystalline Silicon |
| Nominal Power | 200.0W±5% |
| Operating Voltage (Vmp) | 38.8V±5% |
| Operating Current (Imp) | 5.24A±5% |
| Open-Circuit Voltage (Voc) | 45V±5% |
| Short-Circuit Current (Isc) | 5.66A±5% |
| Cell Efficiency | ≥22% |
| Working Temperature | -20°C ~ +60°C |
| Ingress Protection (IP) Rating | IP67 |
| Fold Dimension | 597*610*42±1mm / 23.5"*24"*1.7in |
| Unfold Dimension | 2220*610*27±1mm / 87.4"*24"*1.1in |
| Weight | 7.8KG / 17.2 lbs |
| Connector | MC4 |
Setup and Operation
Initial Setup
- Unfold the solar panel completely until it is fully expanded.
- Position the panel to face the sun directly. Adjust the angle to maximize sunlight exposure.
- Connect the MC4 cable (typically supplied with your Pecron power station or generator) to the solar panel's MC4 connector.
- Connect the other end of the MC4 cable to the input port of your compatible Pecron power station or generator, following its specific wiring instructions.
Optimal Positioning
The conversion efficiency of solar panels depends on various factors, including the amount of solar radiation, cloud thickness, dust deposition, and the angle of the solar panel relative to the sun. Achieving ideal conditions is crucial for maximum power output.

For best results, ensure the panel is fully expanded and not shaded by trees, poles, or other obstacles. Do not place the solar panel in dark, humid places or near fire sources.

Maintenance
- Cleaning: Regularly wipe the surface of the solar panel with a soft, damp cloth to remove dirt, dust, or debris. Do not use diluted gasoline or harsh chemical cleaners, as these can damage the panel surface. A clean surface ensures maximum sunlight absorption and power generation efficiency.
- Storage: When not in use, fold the panel and store it in a dry, cool environment, away from moisture and corrosive substances. Ensure it is protected from physical impact.
- Inspection: Periodically check the panel for any physical damage, such as cracks or deep scratches. Also, inspect the MC4 connector for cleanliness and signs of corrosion.
Troubleshooting
Q1: Why can't the solar panel charge electronic equipment?
- Check if the electronic equipment or output interface is properly connected. Try re-plugging the connections.
- Ensure the solar panel is facing the sun correctly. After confirming the sun's position, readjust the panel's direction. Avoid placing it in shadows from trees, telegraph poles, or other obstacles.
- Inspect the solar panel surface for dirt. If the surface is dirty, wipe it with a soft, wet cloth. Never use diluted gasoline or harsh solvents.
- Consider the environment and weather conditions. Power generation capacity is naturally lower in cloudy or overcast weather.
Q2: Can the solar panel generate power in cloudy weather?
Yes, the solar panel can generate power in cloudy weather, although it will produce significantly less power compared to sunny conditions due to reduced solar radiation.
Q3: What is the difference between nominal output and actual output of a solar panel?
The nominal maximum output power (rated output) of a solar panel is a value calculated under standard test conditions (STC): a surface temperature of 25°C and a sunlight intensity of 1000 W/m². The actual output is often lower than the nominal maximum output power due to the following reasons:
- Installation Environment: Real-world conditions rarely match STC.
- Characteristics of Solar Battery: Inherent properties of the solar cells.
- Dirt on the Panel Surface: Accumulation of dust, dirt, or debris on the panel surface reduces light absorption.
- Energy Loss: The generating capacity decreases due to various energy losses in the system.
- Partial Shading: If only a part of the solar panels is exposed to sunlight, the power generation efficiency decreases, and the power output becomes weak. Always fully expand the solar panel and ensure it is not shaded.
User Tips
- Angle Adjustment is Key: Always take the time to adjust the panel's angle to directly face the sun. Even small adjustments can significantly improve charging speed, especially as the sun moves throughout the day or changes position seasonally.
- Avoid All Shadows: Be meticulous about avoiding any shadows on the panel. Even a small shadow from a tree branch or pole can drastically reduce the overall power output of the entire panel.
- Pre-Use Wipe Down: Before each use, give the panel a quick wipe-down with a soft, damp cloth. Dust and pollen can accumulate quickly and reduce efficiency without being immediately obvious.
Support and Documentation
For further assistance, technical support, or any inquiries regarding your Pecron 200W Foldable Solar Panel, please contact Pecron customer support.
Customer Support Email: support@pecron.com
A digital version of this user manual is available for download in PDF format: