Fccemc Car Expression Strobe Warning Light

Contents

Fccemc Car Expression Strobe Warning Light User Manual

Model: Car Expression Strobe Warning Light

Brand: Fccemc

Introduction

This manual provides essential information for the safe and effective use of your Fccemc Car Expression Strobe Warning Light. Please read it thoroughly before installation and operation, and retain it for future reference.

Safety Warnings

  • This product is a car decorative light with a USB plug or cigarette lighter plug.
  • USB plug is only for USB ports.
  • Cigarette lighter plug is only for cigarette lighter sockets.
  • Do NOT mix plugs and sockets; improper use may cause short circuit, overheating, or fire.
  • Install only when the vehicle is off.
  • Do not block airbags, driver's view, or vehicle control devices.
  • This product is not a replacement for original vehicle lights. It is for decorative use only.
  • If the product becomes hot, damaged, or malfunctions, please stop using it immediately.
  • Do not disassemble or get this product wet.
  • Keep out of reach of children and pets to prevent accidents.

Specifications

Feature Description
Product Name Demon eyes for car
Material LED
Style Options Triangle, Semicircle
Voltage 5V
Power Supply USB
Control Method Keypad control (on USB plug)
Light Modes 1 constant mode + 10 flashing modes
Waterproof Rating IP65 (due to glue drip technology)
Wire Length 400cm (Total)
Terminal Bifurcation 36cm
Triangular Light Dimensions 13.3cm x 9cm x 15.8cm
Semicircular Light Dimensions 12.2cm x 6.8cm

Diagram showing product dimensions and USB controller details Figure 1: Product dimensions and USB controller overview.

Package Contents

  • Demon eyes for car (2 Pcs)

Setup and Installation

  1. Prepare the Surface: Ensure the installation surface on your car's rear windshield is clean and dry.
  2. Position the Lights: Carefully peel the adhesive backing from the demon eye lights. Position them on the desired location on the rear windshield.
  3. Secure the Lights: Press firmly to ensure good adhesion.
  4. Route the Cable: Route the power cable to avoid obstructing the driver's view, airbags, or vehicle control devices.
  5. Connect Power: Connect the USB plug to a compatible USB port in your vehicle. If using a cigarette lighter plug (not included, but compatible with some models), ensure it's connected to the correct socket. Do not force the plug into a mismatched socket.

Easy installation steps for the car demon eye lights Figure 2: Visual guide for easy installation.

Car with yellow triangular devil's eye lights installed on the rear windshield Figure 3: Example of triangular lights installed.

Operation

The Car Expression Strobe Warning Light is controlled via a keypad integrated into the USB plug.

  • Power On/Off: Long press the power button on the USB controller to turn the lights on or off.
  • Switch Modes: Single press the mode switch button to cycle through the 10 flashing modes and 1 constant mode.

Diagram of the USB controller showing on/off and mode switch buttons Figure 4: USB controller with power and mode buttons.

Video 1: Demonstration of the various flashing modes of the car expression strobe warning light.

Maintenance

  • Keep the product clean and dry.
  • Do not disassemble the product.
  • Avoid getting the product wet.
  • Regularly check the wiring and connections for any signs of wear or damage.

Troubleshooting

  • Lights not turning on: Ensure the USB plug is securely connected to a functional USB port. Check if the vehicle's power is on.
  • Lights malfunctioning or getting hot: Immediately disconnect the power. Do not continue to use the product if it is damaged or overheating.
  • Short circuit: Ensure the correct plug type is used for the corresponding socket (USB for USB port, cigarette lighter for cigarette lighter socket). Do not mix.

User Tips

  • For optimal visibility and effect, install the lights on a clean, flat section of the rear windshield.
  • Experiment with different flashing modes to find the one that best suits your preference or driving conditions.
  • Consider the placement carefully to ensure it does not interfere with rear visibility or other vehicle functions.

Manufacturer Information and Compliance

Manufacturer: Guangzhou Zhengji Information Technology Co., Ltd

Address: Room 311, Building 2, Jiahe Creative Industry Park, Huangbian North Road, Baiyun District, Guangzhou City, Guangdong Province, China, 510440

Tel: 86-13535102100

E-mail: zj634216187@163.com

EU Authorized Representative: Apex CE Specialists GmbH, Grafenberger Allee 277, 40237 Dusseldorf, DE

E-mail: Info@apex-ce.com

Tel: +49 21312066043

This product complies with EU RoHS and REACH environmental directives, meets LVD 2014/35/EU low-voltage electrical regulations and EMC 2014/30/EU electromagnetic compatibility regulations, and is suitable for use in the EU market.

For a detailed user manual in PDF format, please refer to the official documentation available from the seller or manufacturer.

© 2023 Fccemc. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.