ZODOLAMP 001

Contents

ZODOLAMP Solar Light Ceiling Lamp User Manual

Model: 001 (Solar Flood Lights)

Brand: ZODOLAMP

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your ZODOLAMP Solar Light Ceiling Lamp. This product is designed for both indoor and outdoor use, featuring a separate solar panel for flexible placement and intelligent light control for automatic operation.

Key features include:

  • Outdoor Waterproof Reflector Solar light design
  • Self-contained installation method
  • Integrated Lithium battery and LED bulbs
  • Dimmable functionality
  • IP66 Protection Level for water and dust resistance
  • Durable ABS Body Material
  • Intelligent light control and wireless remote control
  • Automatic charging during the day and automatic illumination at night
  • Solar panel designed to be waterproof and lightning-proof
Solar light ceiling lamp and separate solar panel
Overview of the ZODOLAMP Solar Light Ceiling Lamp with its separate solar panel.
Six qualities icons: Solar charging, intelligent light control, IP66 waterproof, fast heat dissipation, LED chip, remote control
Six key qualities of the ZODOLAMP Solar Light.

Important Safety Instructions

DANGER:

  • The edges of the product may be sharp. Exercise caution to avoid cuts or scratches during handling and installation.

ATTENTION:

  • Always handle the product carefully to prevent injury.
  • Before use, ensure that the magnetic attraction (if applicable for mounting) is normal to prevent the tool or components from slipping off.
  • Verify that all screws and other accessories are securely tightened before and after installation.

Setup and Installation

The ZODOLAMP Solar Light features a self-contained design with a separate solar panel, allowing for flexible installation. The solar panel should be placed in an area that receives maximum direct sunlight throughout the day for optimal charging.

Installation Steps:

  1. Unpack Components: Carefully remove all items from the packaging. Verify that all parts are present: ceiling lamp unit, solar panel, remote control, and mounting hardware.
  2. Choose Location for Solar Panel: Select an outdoor location for the solar panel that receives at least 6-8 hours of direct sunlight daily. The panel is waterproof and lightning-proof, suitable for outdoor exposure.
  3. Mount Solar Panel: Use the provided mounting hardware to securely attach the solar panel to a wall or roof. Ensure it is angled to capture maximum sunlight.
  4. Choose Location for Ceiling Lamp: Select a desired location for the ceiling lamp, either indoors (e.g., aisle, balcony, bedroom) or in a covered outdoor area.
  5. Mount Ceiling Lamp: Securely attach the ceiling lamp unit to the chosen surface using appropriate mounting hardware.
  6. Connect Solar Panel to Lamp: Connect the cable from the solar panel to the input port on the ceiling lamp unit. Ensure the connection is firm and waterproof.
  7. Initial Charge: Allow the solar panel to charge the lamp's internal battery for at least one full day (6-8 hours of direct sunlight) before initial use.
Solar panel installed on an exterior wall, light installed on a balcony ceiling
Example installation showing the separate solar panel and ceiling lamp placement.
Solar panel on a wall during a thunderstorm
The solar panel is designed to be waterproof and lightning-proof for outdoor installation.

Operation

The ZODOLAMP Solar Light operates with intelligent light control and a wireless remote control.

Automatic Operation:

  • Daytime: The solar panel automatically charges the internal lithium battery when exposed to sunlight. The light will remain off during the day.
  • Nighttime: The light will automatically turn on when it detects darkness, utilizing the stored energy from the battery.
Diagram illustrating automatic charging during the day and automatic lighting at night
Automatic charging during the day and automatic illumination at night.

Remote Control Functions:

The included remote control allows for manual override and setting adjustments. The effective range of the remote control is approximately 10 meters.

Remote control with buttons for AUTO, 3H, 5H, 8H, ON, OFF
Remote control for intelligent operation.
  • AUTO: Activates the intelligent light control mode (automatic on at dusk, off at dawn).
  • ON: Manually turns the light on.
  • OFF: Manually turns the light off.
  • 3H: Sets the light to stay on for 3 hours, then turn off.
  • 5H: Sets the light to stay on for 5 hours, then turn off.
  • 8H: Sets the light to stay on for 8 hours, then turn off.
  • Brightness Adjustment: The remote may include buttons for increasing or decreasing brightness (indicated by sun icons).

Maintenance

The ZODOLAMP Solar Light is designed for low maintenance with its dustproof sealed construction.

Diagram showing dustproof sealed design, preventing insects and dust accumulation
The dustproof sealed design helps prevent insects and dust from entering the lamp.
  • Cleaning: Periodically wipe the solar panel and the lamp's acrylic cover with a soft, damp cloth to remove any accumulated dust or debris. This ensures optimal light transmission and charging efficiency. Do not use abrasive cleaners or solvents.
  • Battery: The internal lithium battery is designed for long-term use. If you notice a significant decrease in performance over time, ensure the solar panel is clean and receiving adequate sunlight.
  • Connections: Occasionally check the connection between the solar panel and the lamp unit to ensure it remains secure and free from corrosion.

Troubleshooting

ProblemPossible CauseSolution
Light does not turn on at night.
  • Insufficient solar panel charging.
  • Solar panel or lamp is dirty.
  • Battery is depleted or faulty.
  • Light sensor is obstructed or faulty.
  • Ensure solar panel is in direct sunlight for 6-8 hours.
  • Clean solar panel and lamp cover.
  • Allow several days of full charge. If problem persists, battery may need replacement (contact support).
  • Ensure light sensor is clear and not covered.
Light stays on during the day.
  • Light sensor is obstructed or faulty.
  • Remote control setting override.
  • Ensure light sensor is clear and exposed to daylight.
  • Press the "AUTO" button on the remote control.
Remote control not working.
  • Remote battery depleted.
  • Obstruction between remote and lamp.
  • Remote control is too far from the lamp.
  • Replace remote control battery.
  • Ensure clear line of sight.
  • Operate within the 10-meter effective range.

Specifications

FeatureDetail
Brand NameZODOLAMP
Model Number001 (Solar Flood Lights)
Power SourceSOLAR
Voltage3.7V
Light SourceLED bulbs (2835 patch type)
Is Bulbs IncludedYes
Is DimmableYes
Solar Cell TypeLithium battery
Protection LevelIP66 (Dustproof and Waterproof)
Body MaterialABS Plastic
Installation MethodSelf-contained
FeaturesOutdoor Waterproof Reflector Solar light
Control MethodLight control + intelligent remote control
StyleModern Style
UseEMERGENCY (as listed)
OriginMainland China
CertificationCCC, CE, CQC, EMC, FCC, GS, LVD, PSE, ROHS, SAA, UL, VDE
Warranty1 year

Available Power Options & Corresponding Specifications:

Power OptionLamp BeadsSolar Panel Power/VoltageBattery Capacity/VoltageLamp Body Size (mm)Solar Panel Size (mm)
60W543W6V3000mAh / 3.7VΦ200135*215
100W1206W6V6000mAh / 3.2VΦ240170*280
200W2468W6V8000mAh / 3.2VΦ280230*350
300W32812W6V12000mAh / 3.2VΦ320290*350
400W41815W6V15000mAh / 3.2VΦ360350*350
Product parameter table with detailed specifications for various power options
Detailed product parameters for different power variants.
Diagram showing dimensions for 60W model and specifications table
Dimensions and key specifications for the 60W model.

User Tips

  • If you experience issues with the remote control's 'OFF' function, ensure the remote's battery is fresh and you are within the 10-meter effective range with a clear line of sight to the lamp. If the issue persists, try cycling power to the lamp by disconnecting and reconnecting the solar panel, then re-test the remote.
  • For optimal performance, regularly check that the solar panel is free from obstructions like leaves, snow, or dirt, which can reduce charging efficiency.

Warranty and Support

This product comes with a 1-year warranty from the date of purchase.

For warranty claims, technical support, or inquiries, please contact the manufacturer or importer using the details below:

Manufacturer Information:

  • Product Name: Bauhinia Flower Light
  • Model: 001
  • Batch/Serial Number: MDQ01
  • Manufacturer Address: One of the first floor of the house of the mingli building, no. 3 bairui village committee of heikou street office, yuncheng district, yufeng city, guangdong province
  • Manufacturer Tel: 86-18688568258
  • Manufacturer Mail: 18688568258@139.com

Importer Information:

  • Importer Name: Yunfeu xingyu trading co., ltd
  • Importer Address: One of the first floor of the house of the mingli building, no. 3 bairui village committee of heikou street office, yuncheng district, yufeng city, guangdong province

Please retain your proof of purchase for warranty purposes.

A digital version of the user manual is available for reference: User manual (PDF)

© 2023 ZODOLAMP. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.