Pecron E500LFP

Contents

Pecron E500LFP Portable Power Station User Manual

Model: E500LFP

Brand: Pecron

1. Introduction

The Pecron E500LFP is a portable power station designed to provide reliable power for various devices, whether for home use, RVs, or camping. It features a 576Wh LiFePO4 battery, 600W AC outlets, and multiple charging options, including fast charging and solar input. This manual provides essential information for safe and efficient operation of your E500LFP power station.

Video: Pecron E500LFP Portable Power Station Overview. This video demonstrates the key features and design of the power station.

2. Function Introduction

Familiarize yourself with the various components and ports of your Pecron E500LFP power station.

Pecron E500LFP Portable Power Station front view

Image: Front view of the Pecron E500LFP Portable Power Station, showing the main display and output ports.

Pecron E500LFP Portable Power Station with labeled components

Image: Detailed diagram of the Pecron E500LFP, highlighting its various ports and controls.

  1. LCD Display: Shows input/output wattage, battery level, temperature, and other status indicators.
  2. DC 12V/USB/Wireless Switch: Controls the DC, USB, and wireless charging outputs.
  3. DC12V Cigar Output: 12V-10A output for car accessories.
  4. 5525 DC 24V Output: 24V-5A DC output.
  5. 5525 DC 12V Output: 12V-5A DC output.
  6. Wireless Charger: 15W wireless charging pad on top.
  7. AC 100V~120V Switch: Controls the AC output.
  8. AC 100V~120V Output: Two 600W AC outlets.
  9. USB-A/USB-C Ports: Two USB-A (Max 18W) and two USB-C (Max 100W) ports.
  10. LED Light: Integrated emergency LED light.
  11. 5521 Car/PV Input: Input port for car charging or solar panel (12V~28V / 100W Max).
  12. Switch Of Light: Button to control the LED light.
  13. AC 100V~120V Input: AC input for charging (500W).

3. Specifications

Detailed technical specifications for the Pecron E500LFP Portable Power Station.

FeatureSpecification
Capacity576Wh (19.2V30Ah)
Battery TypeLiFePO4 Battery (80%+ Original Capacity at 3500 Cycles)
Charging Time80% in 60 minutes, 100% in 90 minutes
Temperature (Charging)0°C~45°C / 32°F~113°F
Temperature (Discharging)-20°C~45°C / -4°F~113°F
DimensionL254 x W172 x H189 mm (L10 x W6.8 x H7.4 in)
Net WeightAround 6.75 Kg (14 lb)
ProtectionsOver-Voltage, Overheat, Overload, Short-Circuit, Self-Recovery
AC Output2 x 100V~120V Pure Sine Wave, Max 600W
USB-A Output2 x (5V, 9V, 12V, Max 18W)
USB-C Output2 x (5V, 9V, 12V, 20V, Max 100W) (PD 100W output; 100W input, rechargeable and discharge.)
Cigar Port Output1 x DC 12V-10A
DC 5525 Output1 x DC 12V-5A, 1 x DC 24V-5A
Wireless Charger1 x Max 15W
USB-C Input1 x DC 20V-5A (5V, 9V, 12V, 20V, Max 100W)
DC 5521 Input1 x DC Charging (12V~28V) Max 100W
AC Inlet Input1 x AC 100V~120V / 500W
UPS Power600W
Display ScreenYes
Smart APPAPP Control, Wifi remote control or Bluetooth control

4. Setup and Operation

4.1. Basic Controls

  • LED Light: Long press the LED light button to turn it on/off. Short press to switch between low light, high light, and SOS mode.
  • AC Output: Press and hold the AC ON/OFF button to turn the AC output on/off. Short press to view voltage and frequency after turning on.
  • DC/USB/Wireless Output: Long press the DC ON/OFF button to control the DC/USB/Wireless output. Short press to view battery voltage.

Note: Turn off the AC power when the E500LFP is not in use for a long time to conserve battery.

4.2. LCD Smart Display

The LCD display provides real-time information about the power station's status.

  • Wireless Connection: Indicates Wi-Fi status.
  • Bluetooth Connection: Indicates Bluetooth status.
  • Battery Level: Shows the current battery charge.
  • UPS Function: Indicates if UPS mode is active.
  • ECO Mode: Indicates if ECO mode is active.
  • Fan Working: Indicates if the cooling fan is operating.
  • AC/DC Input Wattage: Displays the current power input.
  • Battery Volume (Voltage): Shows the battery voltage.
  • Temperature Alarm: Alerts if the internal temperature is too high or low.
  • Equipment Alarm: General fault indicator.
  • AC/DC Output Wattage: Displays the current power output.
  • Remaining Charging Time: Estimated time until full charge.
  • Remaining Hours of Charge/Discharge: Estimated runtime or charging time.
  • Remaining Use Time: Estimated remaining operational time.

4.3. APP Function

The Pecron E500LFP can be controlled and monitored remotely via the PECRON APP.

  • Connection: Long press the AC and DC switches together for 3 seconds to initiate pairing. The Wi-Fi icon will flash when in pairing mode.
  • Download: iPhone users can find the PECRON APP on the Apple App Store. Android users can download it from Google Play.
  • Features: Review product specifications, control settings, and customize charging power.
Pecron E500LFP App Smart Control interface

Image: Screenshot of the Pecron E500LFP APP interface, showing machine status, power level, and customized charging options.

4.4. Charging the E500 LFP

The E500LFP offers multiple charging methods:

4.4.1. AC Charging

Connect the power station to a standard AC wall outlet using the provided AC Charging Cable. The AC input supports 100V~120V at 500W.

Pecron E500LFP AC Charging Diagram

Image: Diagram illustrating AC charging for the Pecron E500LFP, showing connection to a wall outlet.

Warning: During charging by a generator, unstable voltage and frequency may damage the device.

4.4.2. USB-C Charging

The USB-C port supports up to 100W input for charging the power station.

4.4.3. Vehicle Charging

Charge the E500LFP using your vehicle's 12V outlet with the Car Charging Cable. The car input supports DC 12V~28V at Max 100W.

4.4.4. Solar Panel Charging

Connect a solar panel to the 5521 Car/PV Input port. The solar input supports DC 12V~28V at Max 100W. It is recommended to use Pecron solar panels for optimal performance. The VOC of a single solar panel should be less than 28V, and the VMP should be greater than 12V.

4.5. UPS Function

The E500LFP supports an Uninterruptible Power Supply (UPS) function. When connected to AC mains power, the AC output prioritizes mains power. If the external AC mains power is suddenly cut off, the AC output will switch to supply power from the power station's battery pack within 8-20ms.

Note: Switching in 0ms is not available. Do not connect the product to devices that require 0ms switching, such as servers and workstations. Test and confirm compatibility in advance. Avoid connecting multiple devices simultaneously to prevent overload. Pecron is not responsible for equipment damage or data loss due to failure to follow instructions. The maximum power under UPS function is 600W.

4.6. ECO Mode

To activate or deactivate ECO mode, long press the DC button and the LED light button simultaneously for 2 seconds. In ECO mode, the AC charging power is reduced to 50%. If there is no operation for 1 minute, the screen will automatically turn off. The power station will automatically shut down after 3 hours without any load.

5. Safety Warnings

Please read and adhere to the following safety warnings to prevent injury or damage to the product.

  1. Do not place the device near heat sources, such as a fire or a heating furnace.
  2. Do not immerse in any liquid, or expose the unit to rain or wet conditions.
  3. Do not use the battery in a strong static electricity or electromagnetic environment.
  4. Do not disassemble or puncture the product with sharp objects in any way.
  5. Short circuits can be caused by: vermin or pests chewing through wires; water or other fluids coming into contact with electrical wiring.
  6. It is prohibited to be used as a car jump starter; it can only be used to charge the car battery.
  7. Do not use accessories or parts other than those provided by PECRON.
  8. When using this product, strictly follow the ambient temperature for use as specified in the user manual. If the temperature is too high, the battery can potentially result in self-combustion and will burst into flames. If the temperature is too low, the performance of the battery will be seriously degraded.
  9. Do not stack heavy objects on this product.
  10. Do not block the air vents during use, or leave the device in a non-ventilated or dusty space.
  11. Please avoid impacts, falls, and violent vibration. Turn off the device immediately and stop using it in the event of major exterior impact. Fasten the unit firmly during transportation to avoid vibration and impact.
  12. In the event of accidentally immersing the device in water, place the unit in a safe open area and keep away from the unit until it is completely dry. The dried unit should not be reused and should be disposed of properly according to local regulations. If the device catches fire, use fire extinguishing equipment in the following recommended order: water or mist, sand, fire blanket, dry chemical, carbon dioxide fire extinguisher.
  13. Please place this device with care to prevent damage due to falling. If the product is damaged due to a fall, turn off the unit immediately and place it in an open area, keep away from combustibles and crowds, and dispose of in accordance with local laws and regulations.
  14. Please store this device in a place out of reach of children and pets.

6. Troubleshooting and FAQs

6.1. Frequently Asked Questions

  • Q: What kind of battery is used in E500 LFP? How long can it last?
    A: E500 LFP utilizes a high-quality UL certified automotive LiFePO4 battery. It can retain 80% of its original capacity after 3500 complete charge cycles.
  • Q: What devices can E500 LFP power?
    A: The AC output port can only charge or power devices that operate at less than 600W. The DC output port can only charge or power devices that operate at less than 12V-10A and 24V-5A.
  • Q: Can the E500 LFP be used as UPS?
    A: Yes, E500 LFP supports UPS function with an automatic switchover time of 8~20ms.
  • Q: How to calculate the E500 LFP running time?
    A: Running Time = Total Capacity (576Wh) * 0.85 (Depth of Discharge) / Loading Power (Watts).
  • Q: Does E500 LFP have a built-in MPPT charge controller?
    A: Yes, there is one independent built-in MPPT controller; the "5521" port supports 12~28V (Max 100W) PV input.
  • Q: Can the E500 LFP be charged while discharging?
    A: Yes, it can be charged and discharged at the same time. Under non-UPS state, if uninterrupted use is required, the average power of charging must be greater than the average power of electricity, otherwise the battery will eventually run out and shut down.
  • Q: How to store the E500 LFP?
    A: Turn off the unit and store it in a dry, ventilated place at normal room temperature. Do not place this unit near water sources or a wet/moist environment. For long-term storage, it is recommended to discharge the battery to 30% every three months and recharge it to 60% to sustain battery life.
  • Q: Other issues to be noted.
    A: The product is not waterproof. Prevent water from getting into it. Ensure good ventilation at the air inlet and outlet during use. Do not use the product in special occasions (e.g., under a mine, gas station).

7. Maintenance

  • Cleaning: Wipe the device with a dry cloth to clean its surface.
  • Storage: For long-term storage, turn off the unit and store it in a dry, ventilated place at normal room temperature. Discharge the battery to 30% every three months and recharge it to 60% to maintain battery life.
  • Ventilation: Do not block the air vents during use. Ensure the device is in a well-ventilated space.

8. Disposal

When conditions permit, completely discharge the battery and place the product in a designated battery recycling box. Batteries contain dangerous chemicals and must not be disposed of in ordinary trash. Follow local laws and regulations for battery recycling and disposal. If the battery cannot be completely discharged due to product failure, do not dispose of it directly; contact a professional battery recycling company. An over-discharged battery that cannot start should also be disposed of properly.

9. Warranty and Support

9.1. Exclusions

PECRON's warranty does not apply to products that have been misused, abused, modified, damaged by accident, or used for anything other than normal consumer use as authorized in PECRON's current product literature.

9.2. Customer Support

For further assistance, please visit the official website or contact customer support:

You can also find the full user manual in PDF format for detailed instructions: Download User Manual (PDF)

10. User Tips

  • Calculate Runtime: To estimate how long the power station can run a specific device, use the formula: (Total Capacity in Wh * 0.85) / Device Wattage in Watts. For example, for a fan, divide (576Wh * 0.85) by the fan's wattage to get approximate hours.
  • Optimal Solar Charging: For the best solar charging experience, consider using PECRON brand solar panels. Ensure your solar panel's Open Circuit Voltage (VOC) is less than 28V and its Maximum Power Voltage (VMP) is greater than 12V.
  • App Control: Utilize the PECRON APP for convenient remote monitoring and control of your power station, including checking status and customizing charging power.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.