seediq Rechargeable Led Wall Light Battery Powered

Contents

SEEDIQ Rechargeable LED Wall Lamp User Manual

Model: Rechargeable Led Wall Light Battery Powered

1. Introduction

Thank you for choosing the SEEDIQ Rechargeable LED Wall Lamp. This wireless picture light is designed to illuminate your artworks and photos with adjustable brightness and color temperature, offering convenience and versatility. This manual provides essential information for the safe and efficient use of your new lamp.

SEEDIQ Rechargeable LED Wall Lamp illuminating an artwork
Figure 1: SEEDIQ Rechargeable LED Wall Lamp in use, highlighting its adjustable features and long battery life.

2. Package Contents

Please check the box for the following items:

  • 1 x SEEDIQ Rechargeable LED Wall Lamp
  • 1 x Type-C Charging Cable
  • 1 x Remote Control
  • 1 x Mounting Base Plate
Contents of the SEEDIQ LED Wall Lamp package
Figure 2: All components included in the package: the lamp, USB-C cable, remote control, and mounting bracket.

3. Specifications

FeatureDetail
Brandseediq
Model NumberRechargeable Led Wall Light Battery Powered
Shell MaterialAluminum, Iron / PC
Color OptionsBlack, Gold
Light SourceLED
Luminous Flux249-2000 Lumens
Color TemperatureRemote Dimming (3000K-6500K, adjustable)
CRI (Color Rendering Index)90+
Wattage5W MAX
Battery Capacity4400mAh
Charging PortType-C
Charging Time4 hours
Maximum Lighting Time14 hours (at lowest brightness)
Voltage5V (≤36V)
Installation TypeWall Mounted, Self-contained
Lamp Rotation Angle270° up and down
Flexible Joints2 joints, 160° adjustment
Lighting Area1-3 square meters
Dimensions (Lamp)16 inches (40cm) length
Dimensions (Base)5.9 inches (15cm) width, 1.9 inches (4.8cm) height
Switch TypeRemote Control, Touch On/Off Switch
CertificationsCE, LVD, ROHS
Table of specifications for the LED wall lamp
Figure 3: Detailed specifications of the SEEDIQ Rechargeable LED Wall Lamp.
Dimensions and rotation angle of the LED wall lamp
Figure 4: Lamp dimensions and 270° rotation capability.

4. Setup and Installation

The SEEDIQ LED Wall Lamp is designed for quick and easy installation.

  1. Prepare the Mounting Location: Choose a suitable location on your wall where you wish to install the lamp. Ensure the surface is clean and dry.
  2. Fix the Base Plate: Using appropriate tools (e.g., drill, screwdriver), securely attach the mounting base plate to the wall. Ensure it is level and firmly fixed. The base plate has an 'Attention: Front, The Direction of Up' indicator.
  3. Attach the Lamp: Once the base plate is secure, simply hang the LED wall lamp onto the base plate. It should click or slide into place securely.
  4. Ready for Use: The lamp is now installed and ready to be turned on.
Quick installation steps for the LED wall lamp
Figure 5: Quick installation guide: 1. Fix the base plate. 2. Hang the light on it.

Installation Notes and Warnings:

  • Avoid scratching the lamp during installation.
  • Ensure the base plate is securely fastened to prevent the lamp from falling.

5. Operating Instructions

5.1. Remote Control Functions

The included infrared remote control allows for full command over your lamp's settings:

  • ON/OFF: Press the green 'ON' button to turn the lamp on, and the red 'OFF' button to turn it off.
  • Color Temperature Adjustment: Use the three sun icon buttons to cycle through different color temperatures: white light (cool), warm light, and natural light. (Approx. 3000K, 4500K, 6000K).
  • Dimming (Brightness Adjustment): Use the '-' and '+' buttons to decrease or increase the brightness from 10% to 100%.
  • Delay Off Timer: Set a timer for the lamp to automatically turn off after 15, 30, or 60 minutes. Press any key on the remote to cancel an active timer.
Diagram of the remote control functions
Figure 6: Remote control layout and function descriptions.
Brightness and color temperature adjustment demonstration
Figure 7: Visual representation of brightness and color temperature adjustments.

5.2. Lamp Adjustment

The lamp features flexible joints and rotation for optimal light positioning:

  • 160° Flexible Joints: The lamp arm can be adjusted up to 160 degrees to direct light precisely where needed.
  • 270° Lamp Head Rotation: The LED light bar itself can rotate 270 degrees, offering further flexibility in light direction.
Demonstration of 160 degree flexible joint adjustment
Figure 8: The lamp features 2 flexible joints allowing for 160° vertical adjustment.

5.3. Charging the Lamp

The lamp is equipped with a 4400mAh rechargeable battery.

  • Charging Port: Locate the Type-C charging port on the side of the lamp's base.
  • Charging Time: A full charge takes approximately 4 hours.
  • Runtime: The lamp can operate for up to 14 hours on a single charge at its lowest brightness setting.
Charging time and runtimes of the LED wall lamp
Figure 9: Charging time is 4 hours, providing up to 14 hours of runtime.

6. Maintenance

  • Cleaning: To clean the lamp, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electronic components.
  • Battery Care: For optimal battery life, avoid fully discharging the lamp frequently. Recharge the lamp when the light output noticeably diminishes.
  • Storage: If storing the lamp for an extended period, ensure it is partially charged (around 50%) and store it in a cool, dry place.

7. Troubleshooting

ProblemPossible CauseSolution
Lamp does not turn onBattery is depletedCharge the lamp fully using the provided Type-C cable.
Remote control battery is deadReplace the battery in the remote control.
Remote control not aimed at receiverEnsure the remote is pointed towards the lamp's base.
Lamp light is dim or flickersLow battery levelRecharge the lamp.
Remote control not respondingRemote control battery is deadReplace the battery in the remote control.
Obstruction between remote and lampRemove any objects blocking the line of sight.
Lamp not chargingFaulty Type-C cable or power adapterTry a different Type-C cable and a known working USB power adapter.
Charging port is dirty or damagedGently clean the charging port. If damaged, contact support.

8. User Tips

  • Initial Charge: Fully charge the lamp before its first use to ensure optimal battery performance.
  • Optimal Positioning: Experiment with the lamp's adjustable joints and rotation to find the perfect angle and distance to illuminate your artwork without glare.
  • Remote Control Line of Sight: Ensure there's a clear path between the remote control and the lamp's base for reliable operation.
  • Regular Charging: For consistent performance, recharge the lamp regularly, especially if you use it frequently at higher brightness settings.

9. Warranty and Support

Your SEEDIQ Rechargeable LED Wall Lamp comes with a 12-month warranty from the date of purchase, covering manufacturing defects.

If you have any questions, require technical support, or need to claim warranty service, please contact our customer service:

  • Email: info@ebuybest.cc
  • Facebook: @ebuybest

© 2024 SEEDIQ. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.