1. Product Overview
The TMRF-1RW and TMRF-2RW cloning machines are designed for duplicating low-frequency (125KHz) RFID cards and TM keys. The TMRF-2RW model features an LCD screen for enhanced user interaction.
Figure 1: TMRF-2RW Duplicator with various iButton and RFID key fobs and cards.
2. Product Specifications
| Feature | Specification |
|---|---|
| Model | TMRF-2RW (with LCD screen) |
| Supported Frequency | 125KHz only |
| Compatible Protocols | EM4100, TK4100, EM4305, T5577, DS1990, TM1990, RW1990 |
| Power Supply | USB or 3x AAA batteries (not included) |
| Read/Write Distance | 2-10 cm |
| Dimensions (L x W x H) | 100.2mm x 60.3mm x 25.4mm |
| Material | ABS plastic |
| Color | White |
| Voltage | 1.5V |
Figure 2: TMRF-2RW Duplicator dimensions.
3. Supported Cards and Keys
The TMRF-2RW supports the following types of 125KHz RFID cards and TM keys:
- For Reading: EM4100, TK4100, DS1990, TM1990
- For Writing: EM4305, T5577, RW1990
Note: This device only supports 125KHz cards and TM keys. It cannot copy all card types, especially encrypted ones or 13.56MHz cards.
4. Setup
4.1 Power Supply Selection
The TMRF-2RW can be powered via USB or 3x AAA batteries (not included). To install batteries, open the battery compartment on the back of the device and insert three AAA batteries, ensuring correct polarity.
Figure 3: Internal view showing AAA battery compartment.
Connect the device to a USB power source using the provided USB cable, or ensure batteries are installed. Use the power switch on the side of the device to select the power source:
- USB: For power via USB cable.
- OFF: To turn off the device.
- BAT: For power via AAA batteries.
Figure 4: Side view with USB port and power switch.
4.2 Power On
Once the power supply is selected, turn the device ON. If the power supply is sufficient, the device will beep twice and the LCD will display "Reading...". If the battery voltage is low, it will beep continuously and display "low battery".
5. Operating Instructions
5.1 Reading an Original Key or Card
- Ensure the device is powered on and displaying "Reading...".
- Place the original RFID card or TM key within 2-10 cm of the reading area (indicated by the RFID symbol on the device).
- The machine will automatically read the data. If successful, it will beep once, display the protocol (e.g., "HT1990" or "HT4100"), and the ID code. The display will then change from "Reading" to "Writing".
Figure 5: Device displaying 'Reading...' during the read process.
5.2 Writing to a Blank Key or Card
- After successfully reading the original key/card, the device will be ready to write.
- Place a compatible blank card or key (T5577, EM4305, or RW1990) in the writing area.
- The machine will write the stored data to the blank card or key. If successful, the LCD will display "Write OK", an orange light will flash, and the device will emit one beep.
- Test the newly copied card or key to confirm successful duplication.
Figure 6: Device displaying 'Write OK' after successful writing.
5.3 Usage Video
For a visual guide on how to use the TMRF-2RW Duplicator, please watch the official usage video:
Video 1: TMRF-2RW Duplicator Usage Video, demonstrating reading and writing operations for various key types.
6. Troubleshooting
- Cloning Fails (Two short beeps): If the device emits two short beeps and the cloning process fails, check the frequency and compatibility of both the original card/key and the blank card/key. Ensure they match the supported types (125KHz, EM4100, TK4100, EM4305, T5577, DS1990, TM1990, RW1990). Then, try again.
- Low Battery Indication: If the LCD displays "low battery" and beeps continuously, replace the AAA batteries or switch to USB power.
Figure 7: Back of the device showing menu instructions, including error indications.
7. User Tips
- The device works efficiently and quickly for compatible keys and cards.
- Ensure you have compatible blank keys/cards (T5577, EM4305, or RW1990) for successful duplication.
- The device operates well on both USB power and AAA batteries, offering flexibility.
- For optimal reading and writing, keep the key/card within the 2-10 cm range of the reading area.
8. Frequently Asked Questions (FAQs)
- Q1: Does the machine support all card types?
- A1: No, it only supports 125KHz cards like EM4100, TK4100, EM4305, T5577, and TM keys like DS1990, TM1990, and RW1990.
- Q2: How can I identify my key model?
- A2: You can ask your supplier or send a photo of the key for help.
- Q3: Can I copy 13.56MHz cards?
- A3: No, this machine only supports 125KHz cards and TM keys.
- Q4: How far should the card or key be from the reader?
- A4: Keep it within 2-10 cm of the reading area for the best results.
- Q5: Can it clone encrypted cards or keys?
- A5: No, encrypted cards or keys require additional tools and are not supported by this device.
- Q6: Do I need specific blank cards or keys for cloning?
- A6: Yes, use compatible blanks like T5577, EM4305, or RW1990.
- Q7: How do I know if the copy was successful?
- A7: A successful copy will flash an orange light and emit one beep. If it fails, you'll hear two short beeps.
- Q8: Can I connect the device to a computer for editing?
- A8: No, the machine only supports direct copying and cannot be connected to a computer for editing.
- Q9: Does it also duplicate any existing credit on the key/card?
- A9: No, the device only copies the codes of compatible keys, not any stored credit or balance.
9. Maintenance
- Keep the device clean and free from dust and moisture.
- Store in a cool, dry place when not in use.
- Avoid dropping the device or subjecting it to strong impacts.
- Replace batteries promptly when the low battery indicator appears to ensure consistent performance.
10. Warranty and Support
For detailed warranty information and technical support, please refer to the official product documentation or contact your seller. A user manual in PDF format is available for reference: