1. Introduction & Functional Statement
The CARABC Wireless CarPlay & Android Auto Decoder integrates advanced smartphone connectivity into your Toyota vehicle's existing infotainment system. This module enables seamless access to navigation, music, communication, and other apps directly from your car's display.
Key Functions:
- CarPlay / Android Auto: Built-in vehicle interaction system for iPhone and Android phones. Provides voice command and control for phone calls, information, navigation, and music. Supports Siri and Google Assistant voice interaction. Both wireless and wired connections are supported.
- Reversing Video Input: The smart module can decode video signals and supports integration with a rear-view camera system.
- Mirroring: Supports both wired and wireless screen mirroring functions for iPhone (AirPlay) and Android phones.
- USB Video Playback: Automatic media playback function allows you to directly insert a USB disk to play video and audio media.

Figure 1: System overview showing CarPlay, Android Auto, Navigation, and Mirroring integrated into a Toyota dashboard.

Figure 2: Wireless connectivity for iPhone and Android phones, enabling CarPlay or Android Auto, and voice assistants like Siri and Google Assistant.
2. Specifications
| Parameter | Value |
|---|---|
| Operating Voltage | 5V |
| Operating Temperature | -30°C to +75°C |
| Power Consumption | 1A (rated), 3A (Max) |
| Quiescent Current | Less than 3mA |
| Stored Temperature | -30°C to +85°C |
| Environment Humidity | <98% (at 45°C), 65±5% (rated) |
| Shutdown Current | 300mA (Clock on) |
| USB Charging Current | <2A (If >1A, host activates circuit protection to control current below 1.5A) |
Product Information:
- Host Size: 128mm x 84mm x 25mm
- Included Components: Main Decoder Unit, USB Video Cable, Power Cable.

Figure 3: Physical dimensions of the main unit and illustration of included USB Video Cable and Power Cable.

Figure 4: Top view of the decoder unit, highlighting its connectivity ports.
Compatible Models:
This product is compatible with over 90% of Toyota models from 2014-2019 equipped with the Touch2 & Entune2.0 system. Please refer to the detailed compatibility list below:

Figure 5: Compatible Toyota Model List.
Note: The product is compatible with Toyota cars WITHOUT 360 camera/Bird's Eye View. Specific exclusions include 2014-2018 Toyota RAV4 (not compatible with 86100-42241 radio), 2014-2019 Toyota 4Runner (only fits Panasonic & Fujitsu, Pioneer is not supported), 2014-2019 Toyota Corolla (not compatible with 86140-02540 Fujitsu with 7" display), 2016-2019 Toyota Prius (not compatible with Prius w/ 11.6" screen equipped models).
Supported Models (2014-2019): Toyota Highlander, Toyota Prius c, Toyota Prius v, Toyota Sienna, Toyota Tacoma, Toyota Yaris, Toyota C-HR, Toyota Alphard, Toyota Avensis, Toyota Hilux, Toyota Avalon, Toyota Sequoia, Toyota Tundra, Toyota 86, Toyota Verso, Toyota Land Cruiser, Toyota Camry, Toyota Auris, Toyota Fortuner.
3. Setup Instructions
3.1. Connection Diagram
Follow the diagram carefully to connect the decoder unit to your vehicle's existing wiring harness and main unit.

Figure 6: Connection Diagram.
- Connect to Original Car's Main Unit - 24PIN
- Connect to Original Car's Main Unit - 10PIN
- Connect to Original Car's Main Unit - 28PIN
- Connect to Original Car's Plug - 28PIN
- Connect to Original Car's Plug - 10PIN
- Connect to Original Car's Plug - 24PIN
- Forward Looking Input
- Camera Power Supply
- GND
- USB Cable
- WIFI Antenna
3.2. Vehicle Dialing Table
Adjust the DIP switches on the decoder unit according to your car's head unit manufacturer.

Figure 7: Vehicle Dialing Table (DIP Switch Settings).
| Head Unit Model | DIP Switch Settings (1-8) | |||||||
|---|---|---|---|---|---|---|---|---|
| Fujitsu Panasonic | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF |
| Pioneer | OFF | OFF | OFF | OFF | ON | OFF | OFF | OFF |
- All OFF by default: Applicable to Panasonic Fujitsu mainframes.
- Switch 5-ON: Applicable to Pioneer mainframes.
3.3. Wireless CarPlay Connection
Wired Connection: Connect your iPhone to the USB port with a phone cable. A prompt will appear; click