1. Introduction
Thank you for choosing the BEISHI Rolling TV Stand. This mobile TV stand is designed to provide a versatile and adjustable viewing experience for your television. Featuring a sturdy construction, a convenient wood shelf, and smooth-rolling wheels, it offers flexibility in placement and height adjustment. This manual provides detailed instructions for assembly, operation, maintenance, and important safety information to ensure proper use and longevity of your product.
Image: BEISHI Rolling TV Stand (32-60 inch model) with key dimensions.
2. Safety Information
WARNING: Failure to follow these safety instructions may result in serious injury or property damage.
- When installing the stand, it is highly recommended to have it installed by a professional using appropriate safety devices and tools.
- Incorrect installation can cause the TV to fall, leading to serious personal injury.
- Ensure the support surface can safely bear the weight of the unit and all accessories before installation.
- Do not exceed the indicated maximum load weight. Exceeding the load capacity could result in serious injury or property damage.
- This product contains small parts that could pose a choking hazard if swallowed. Keep out of reach of children.
- This product is intended for indoor use only. Outdoor use may lead to product damage and risk of personal injury.
3. Package Contents
Please verify that all parts are present and undamaged before beginning assembly. If any parts are missing or damaged, contact customer support.
Bracket Screw Accessories:
- M6*40mm (A) x4
- M6*8mm (B) x8
- M6 Spacer (C) x10
- Safety hook (D) x2
- Allen wrench (E) x1
TV Screw Accessories:
- M5*25mm (F-1) x4
- M6*25mm (F-2) x4
- M8*25mm (F-3) x4
- 5mm increase pad (G-2) x4
- 10mm increase pad (G-1) x4
- M8 gasket (H-1) x4
- M6 Spacer (H-2) x4
Note: Use the appropriate screw accessory models and height increasing pads based on your TV's requirements.
Main Components:
- Panel bracket (X1)
- Tray (X1)
- Pallet rack (X1)
- Hook (X2)
- Herringbone support legs (X2)
- Storage rack (X1)
- Pulley (X4)
4. Specifications
| Feature | Specification |
|---|---|
| Brand | BEISHI |
| Screen Size Compatibility | 32-60 inches (some models support up to 70 inches) |
| Maximum Load Weight | Up to 50 kg (110 lbs) for 32-60 inch models; Up to 60 kg (132 lbs) for 32-70 inch models |
| Standard VESA | 100x100, 200x100, 200x200, 300x200, 300x300, 400x300, 400x400 (Max VESA up to 500x400mm for 32-60 inch models; up to 600x600mm for 32-70 inch models) |
| Installation Type | Floor Type |
| Adjustment Type | Fixed (Height adjustable during assembly) |
| Adjustable Height Range | 1105-1200mm (for 32-60 inch models); 1378-1518mm (for 32-70 inch models) |
| Shelf Dimensions (approx.) | 650mm (width) x 218mm (depth) for 32-60 inch models; 770mm (width) x 218mm (depth) for 32-70 inch models |
| Base Dimensions (approx.) | 710mm (width) x 540mm (depth) for 32-60 inch models; 850mm (width) x 530mm (depth) for 32-70 inch models |
| Features | Triangular stable structure, thickened bracket (30mm), 360° silent universal wheels, small storage rack. |
Image: BEISHI Rolling TV Stand (32-70 inch model) with key dimensions.
Image: Key features of the BEISHI Rolling TV Stand.
5. Assembly Instructions
Before installation, ensure that the installation holes, dimensions, and weight of your TV stand meet the specifications and standards of the TV stand. If you have any questions or are unclear about the instructions and warnings, please contact us for assistance.
Preparation before installation:
-
Installation of Casters and Herringbone Support Legs
Attach the pulleys (casters) to the herringbone support legs. Ensure they are securely fastened.
-
Installation of Pallet Rack and Pallet
Install and fix the tray stand to the tray with screws B (M6*8mm) and spacers C (M6 Spacer) respectively. Tighten and fix it with wrench E (Allen wrench).
-
Installation of Panel Bracket and Herringbone Support Legs
Step 1: Install the tray to the center of the two herringbone support legs with screws A (M6*40mm) and spacers C (M6 Spacer).
Step 2: Insert the panel bracket into the herringbone support leg holes.
-
Installation of the Rack
Install the shelf on one side of the column with screws B (M6*8mm) and spacers C (M6 Spacer). You can choose to install it on the left or right side according to your actual needs.
-
Installation of Hook and TV
Install the TV Booster Pad, either in the middle of the hook and TV, or on top of the hook, or you can choose not to use it, according to your needs.
Note: Do not use screws that are too short or too long. Long screws can be installed by adding heightening pads between the hook and the TV set.
Use the screws in group E (M5*25mm, M6*25mm, M8*25mm) according to the actual requirements. Use the spacers in group H (M8 gasket, M6 Spacer) according to the screws in group H, and use the height adjustment pads in group G (5mm, 10mm increase pad) according to the actual requirements, or choose not to install them.
-
Installation of Safety Screws
Hang the hook of the installed TV set to the corresponding height according to your preference. Then, use screw B (M6*8mm) to fix the safety hook D (Safety hook) to the panel crossbar and the hook, ensuring the TV is securely mounted.
6. Operating Instructions
Height Adjustment:
The TV stand's height is adjustable during the assembly process by selecting the appropriate mounting holes for the panel bracket on the herringbone support legs. Once assembled, the height is fixed. Refer to the assembly instructions for details on setting the desired height.
Mobility:
The stand is equipped with 360° silent universal wheels, allowing for easy movement. To move the stand, gently push it to the desired location. Ensure the path is clear of obstacles. For stability, engage the wheel locks once the stand is in its final position.
Swivel Function:
The TV can be swiveled left or right on the mounted bracket to achieve optimal viewing angles. Gently adjust the TV's position as needed.
7. Maintenance
- Periodically check the connection between the stand and the TV to ensure it remains stable.
- Inspect for any loose or fallen screws due to prolonged use (at least once every three months).
- If any safety hazard is identified, immediately replace the affected parts or reinforce the installation.
- Clean the stand with a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the finish.
8. Troubleshooting
Stand is wobbly:
Ensure all screws and connections are tightened securely. Verify that the stand is placed on a flat, stable surface. Check the weight of your TV against the stand's maximum load capacity.
Wheels not rolling smoothly:
Check for any debris or obstructions in the wheels. Clean the wheels if necessary. Ensure the wheel locks are disengaged.
TV not level:
Re-check the TV mounting to ensure it is centered and securely attached to the bracket. Adjust the bracket if possible, or ensure the stand itself is on a level surface.
9. User Tips
- Consider the height of your seating area when assembling to set the TV at an ergonomic viewing height.
- Utilize the wood shelf for media devices, remote controls, or decorative items to keep your viewing area tidy.
- When moving the stand, always push from the base rather than pulling on the TV itself to prevent accidental tipping.
10. Warranty & Support
For detailed warranty information, technical support, or to report missing/damaged parts, please refer to the official user manual PDF or contact the seller directly. A PDF version of the user manual is available for download: View User Manual (PDF).