Audi 4B0601170

Contents

Audi Wheel Hub Center Cap Instruction Manual

Model: 4B0601170

1. Product Overview

These Audi wheel hub center caps are designed to enhance the aesthetic appeal of your vehicle's wheels while protecting the hub from dirt and debris. Each set includes four caps, precisely engineered for a secure fit.

Assortment of Audi wheel hub center caps in black and grey, showing front and back views.

Figure 1: Various Audi wheel hub center caps (front and rear views).

2. Safety Information

  • Choking Hazard: Small parts. Keep out of reach of children under 3 years.
  • Sharp Edges: Handle with care to avoid injury from potential sharp edges during installation or removal.
  • This product is intended for individuals aged 18 years and older.

3. Setup and Installation

Before installation, ensure the wheel hub opening is clean and free of any debris or old cap residue.

  1. Verify Fitment: Measure the diameter of your wheel's center cap opening to ensure it matches the 60mm diameter of these caps.
  2. Digital caliper measuring the diameter of an Audi wheel hub center cap, showing a reading of 59.88mm.

    Figure 2: Verifying cap diameter (approximately 60mm).

  3. Clean the Area: Use a mild cleaner and a soft cloth to clean the wheel hub opening where the cap will be installed. Ensure it is dry before proceeding.
  4. Align the Cap: Position the new center cap over the wheel hub opening. Ensure the Audi rings logo is oriented as desired.
  5. Install the Cap: Gently but firmly press the center cap into the opening until you hear or feel a click, indicating the retaining clips have engaged. Do not use excessive force to avoid damaging the cap or the wheel.
  6. A hand holding two Audi wheel hub center caps, one grey and one black, demonstrating their size and handling.

    Figure 3: Handling the center caps for installation.

    Close-up of the rear of a black Audi wheel hub center cap, showing the retaining clips and part number 4B0 601 170.

    Figure 4: Rear view of the cap showing retaining clips.

4. Operating Instructions

Once installed, the wheel hub center caps require no further operation. They serve as a decorative element and provide protection to the wheel hub assembly.

An Audi wheel hub center cap installed on a multi-spoke dark grey alloy wheel.

Figure 5: Example of an installed center cap.

5. Maintenance

  • Cleaning: Clean the caps regularly with mild automotive soap and water. Use a soft sponge or cloth to avoid scratching the surface. Rinse thoroughly and dry with a microfiber towel.
  • Inspection: Periodically check the caps for any signs of damage, looseness, or discoloration.
  • Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish of the caps.

6. Troubleshooting

ProblemPossible CauseSolution
Cap does not fit into the wheel opening.Incorrect diameter.Verify your wheel hub opening diameter. Ensure it is 60mm.
Cap feels loose or falls out.Damaged retaining clips or incorrect size.Inspect the retaining clips on the back of the cap for damage. Ensure the cap is fully seated. If clips are damaged, replacement may be necessary.
Cap surface appears dull or discolored.Accumulation of dirt, exposure to harsh chemicals, or wear.Clean the cap using recommended methods. Avoid using abrasive cleaners.

7. Specifications

Model Name4B0601170
OEM NO.4B0601170
MaterialABS (Acrylonitrile Butadiene Styrene)
Emblem MaterialPVC (Polyvinyl Chloride)
Item Diameter60 mm
Item Length6 cm
Item Weight50 g (per set of 4)
Colors AvailableBlack, Grey
Package Contents4 x Wheel Hub Center Caps
OriginMainland China

8. User Tips

  • Pre-purchase Check: Always measure your existing wheel hub opening or consult your vehicle's specifications to confirm the 60mm size is correct for your wheels (e.g., AEZ wheels).
  • Gentle Installation: Apply even pressure when installing to ensure all clips engage properly without bending or breaking.
  • Aesthetic Enhancement: Many users find these caps significantly improve the visual appeal of their wheels, noting their good quality and accurate representation in product photos.

9. Warranty and Support

For any issues, questions, or support regarding this product, please contact your seller directly. Keep your purchase records handy for faster assistance.

Manufacturer Information:

  • Manufacturer: Yiwu Xinfang Network Technology Co., Ltd
  • Address: Room 301, Building 22, No. 3, Beicun Community, Choujiang Street, Yiwu City, Jinhua City, Zhejiang Province, China
  • Email: xinfang17@163.com

EU Representative Information:

  • Representative: MJCM SARL
  • Address: 78 avenue des Champs, Elysees Bureau 326, Paris, France, 75008
  • Email: mjcm190928@gmail.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.