1. Introduction
Thank you for purchasing the T&G TG106A Portable Bluetooth Speaker. This manual provides essential information to help you set up, operate, and maintain your device. Please read it carefully before use and keep it for future reference.

Figure 1: TG106A Portable Bluetooth Speaker highlighting key features.
2. Package Contents
- TG106A Portable Bluetooth Speaker
- USB Charging Cable (Type-C)
- Audio Cable (AUX)
- User Manual
3. Setup
3.1 Charging the Speaker
- Locate the Type-C charging port on the side of the speaker.
- Connect the provided USB Type-C cable to the speaker's charging port.
- Connect the other end of the USB cable to a 5V USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate (specific behavior not detailed, typically red while charging, off/blue when full).
- Charge the speaker fully before first use (approximately 2-3 hours).

Figure 2: Side panel showing Type-C charging, USB, and AUX ports.
3.2 Powering On/Off
- To Power On: Long press the Power button (
) located on the top panel until you hear an audible prompt. - To Power Off: Long press the Power button (
) again until you hear an audible prompt.
4. Operating Instructions
4.1 Control Panel Overview

Figure 3: Top control panel with function buttons.
| Button | Function (Short Press) | Function (Long Press) |
|---|---|---|
| M (Mode) | Switch playback modes (Bluetooth, TF Card, USB, FM, AUX) | Initiate TWS pairing (in Bluetooth mode without connection) |
| Power / Play/Pause | Play/Pause music; Answer/End call (Bluetooth mode); Auto-scan/Stop scan (FM mode) | Power On/Off |
| - (Volume Down / Previous) | Previous track | Volume down |
| + (Volume Up / Next) | Next track | Volume up |
4.2 Bluetooth Pairing
- Power on the speaker. It will automatically enter Bluetooth pairing mode (indicated by a flashing LED and an audible prompt).
- On your mobile device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select