1. Introduction
This manual provides detailed instructions for the installation, use, and maintenance of your AUTOXBERT Door Handle End Cover Cap Trim. Please read this manual thoroughly before installation to ensure proper fitment and safe use.
2. Product Information
2.1. Product Overview
The AUTOXBERT Door Handle End Cover Cap Trim is designed to replace or cover the end caps of your vehicle's door handles, providing a refreshed look and protection. This set includes four pieces, some with keyhole cutouts and some without, to match various door handle configurations.
Figure 1: Set of four door handle end cover caps.
2.2. Specifications
- Product Name: Door Handle Lock Cylinder Cover
- Model: Vehicle-Specific (Door Handle End Cover Cap Trim)
- Brand: AUTOXBERT
- Material: Plastic
- Color: Black
- Item Weight: 0.02 kg
- External Testing Certification: ISO9001
- OEM NO.: 9101GG, 9101JS, 9101JR, 9101GE
- Package Dimensions: 13cm (Length) x 12cm (Width) x 4cm (Height)
- Package Includes: 4 X Door Handle End Cover Cap Trim
2.3. Compatible Vehicles (Fitment)
- Citroen Berlingo B9 (2008-2018)
- Citroen C3 Picasso (2009-2017)
- Citroen C4 (2004-2010)
- Citroen C4 Picasso (2006-2013)
3. Safety & Warnings
- Color Difference: Due to variations in monitor brightness and ambient lighting, the actual color of the product may vary slightly from the images shown.
- Size Tolerance: This product is manually measured; a dimensional tolerance of ±1-2mm is normal and will not affect installation.
- Safety Reminder: If you encounter resistance during installation, do not force the cover. Re-check the alignment and try again. Forcing the part may cause damage to the cover or the vehicle.
4. Installation Instructions
No special tools are required for the installation of these door handle end covers.
4.1. Preparation
- Cleaning Advice: Wipe the area around the lock cylinder on your vehicle's door handle with a soft cloth to remove any dust or debris. Ensure the surface is clean and dry before proceeding.
- Identify the correct cover for each door handle. Some covers will have a keyhole cutout for the driver's side (and potentially passenger side, depending on vehicle model), while others will be solid.
4.2. Step-by-Step Installation
- Positioning: Locate the keyhole (lock cylinder) area on the front driver or passenger side door exterior where the cover will be installed.
- Align: Carefully match the clips on the back of the cover with the corresponding slots or contours around the door lock cylinder or the existing end cap area.
- Press: Apply even pressure around the edges of the cover until you hear a "click." This indicates that the clips have engaged, ensuring a flush and secure fit.
- Check: Gently pull on the edges of the newly installed cover to confirm it is firmly attached and there are no gaps.
Figure 2: Example of door handle end cover installation location.
Figure 3: Underside view showing clips for attachment.
5. Operation
The door handle end cover caps are passive components designed to protect the lock cylinder area and enhance the aesthetic of your vehicle's door handles. Once installed, they require no active operation.
6. Maintenance
To maintain the appearance and longevity of your door handle end covers:
- Regularly clean the covers with a soft cloth and mild automotive cleaning solution.
- Avoid using abrasive cleaners or harsh chemicals that could damage the plastic finish.
- Inspect the covers periodically to ensure they remain securely attached.
7. Troubleshooting
7.1. Cover Does Not Fit or Install Securely
- Incorrect Part: Ensure the OEM NO. (9101GG, 9101JS, 9101JR, 9101GE) and vehicle fitment (Citroen Berlingo B9, C3 Picasso, C4, C4 Picasso) match your vehicle's requirements. Compare the product images with your existing door handle end caps.
- Alignment Issues: If you encounter resistance during installation, do not force the cover. Remove it and re-check the alignment of the clips with the slots on the door handle. Ensure no debris is obstructing the fit.
- Manufacturing Tolerance: While a ±1-2mm size tolerance is normal, significant discrepancies might indicate a mismatch.
8. User Tips
- Many users find the installation process to be straightforward and easy.
- Double-check the fitment against your specific vehicle model and year before attempting installation to save time and effort.
9. Warranty and Support
For detailed warranty information or technical support, please refer to the official product documentation or contact the manufacturer directly. A PDF version of the item guide and documents is available for further reference.
9.1. Manufacturer Information
- Manufacturer: OEMASSIVE Auto Parts Co., Ltd
- Address: 02, floor10, kerda plaza, no2zhonghaoyi rd, shenzhen, china
- Email: customer@oemassive.cn
9.2. EU Authorized Representative
- Company: Lefeng Technology GmbH
- Address: 2.0G, Zi.203, Beeskower Straße 4, in 15234 Frankfurt (Oder)
- Email: lefeng.tech@outlook.com
9.3. Importer Information
- Company: Shanghai Yinshi Network Technology Co., Ltd
- Address: Room 153, Area B, Building 6, No. 1088 Taihe Road, Baoshan District, Shanghai
For additional information, you may consult the original PDF manual: View User Manual (PDF)