ANBERNIC RG P01

Contents

ANBERNIC RG P01 Game Controller User Manual

Model: RG P01

Introduction

This manual provides comprehensive instructions for the ANBERNIC RG P01 Game Controller. It covers product features, setup procedures, operational guidelines, maintenance tips, and troubleshooting information to ensure optimal performance and user experience. Please read this manual thoroughly before using the controller.

ANBERNIC RG P01 Game Controller

Figure 1: ANBERNIC RG P01 Game Controller

Product Overview

The ANBERNIC RG P01 is a versatile game controller designed for multi-platform compatibility and enhanced gaming performance. It features Hall Effect joysticks and triggers, RGB lighting, and multiple connection modes.

ANBERNIC RG P01 Game Controller in three colors: Beige White, Radiant Purple, and Black

Figure 2: RG P01 Game Controller in available colors

Icons representing PC, Steam, Android, iOS, and Nintendo Switch platforms

Figure 3: Multi-platform compatibility

Icons representing Bluetooth, 2.4G wireless, and wired connection methods

Figure 4: Three-mode connection options

Close-up of the Hall Effect joystick with green lighting

Figure 5: Hall Effect Joystick for accurate control and long service life

Image of the controller with vibration waves emanating from it

Figure 6: Vibration motor for immersive gaming experience

Video 1: ANBERNIC RG P01 Game Controller Features Overview

Specifications

Feature Description
Model NumberRG P01
Brand NameAnbernic
TypeGamepads
OriginMainland China
Connection MethodsBluetooth 5.3 / Wired / 2.4G Wireless
Compatible PlatformNintendo Switch, PC, Android, iOS, Steam
D-pad Button TypeConductive Rubber
ABXY Switch TypeConductive Rubber
Shoulder Button TypeConductive Rubber
RGB Lighting JoysticksYes
Hall EffectYes (Joystick and Triggers)
Joystick Sensor Module Brand/TypeHall
Trigger Button TypeHall Trigger
Button LayoutXBOX Layout
VibrationDual Asymmetric Pendulum Motor (Rotor Motor)
Report RateWired 400Hz / Bluetooth 150Hz / 2.4G Wireless 200Hz
Battery600mAh Lithium Polymer, approx. 9 hours of playtime
ChargingInput voltage 5V, fully charged in 2.5 hours
Gamepad Size14.6 x 10.3 x 6.3 cm
Gamepad Weight203 g
Six-axis GyroscopeYes
Additional ButtonsTwo Macro Programmable buttons (M1, M2), One Turbo Setting Button
ColorsBeige White, Radiant Purple, Black

Setup

The RG P01 controller supports wireless (Bluetooth, 2.4G) and wired connections across various platforms.

Diagram of RG P01 Game Controller buttons and ports, including Hall triggers, joysticks, D-Pad, ABXY buttons, and M1/M2 back buttons.

Figure 7: Game Button and Port Layout

Wireless Pairing

Mode Pairing Method LED Status
SwitchPress the pairing button for 2 seconds.Assign LED1-LED4 by player
Xinput (PC)Press and hold X, then press the pairing button for 2 seconds.LED2 is always on
AndroidPress and hold A, then press the pairing button for 2 seconds.LED3 is always on
iOSPress and hold B, then press the pairing button for 2 seconds.LED1+LED4 is always on

Note for Switch Pairing: When pairing with Switch, open the Switch main interface, click "Controller icon" -> "Change grip/order" -> "Enter pairing interface" in sequence. After initial pairing, pressing the HOME button will automatically reconnect the controller.

2.4G Receiver Connection

Mode Connection Method LED Status
PC (Xinput)Insert the receiver into the PC's USB port. Press and hold the button on the receiver for 2 seconds until its light quickly flashes. Then, press Y + pairing button on the controller to pair. Short press HOME to reconnect if receiver light is slowly flashing.LED2 is always on
PC (Switch)In PC (Xinput) mode, press Select + Start for 3 seconds to switch.LED1 is always on
Android (11.0+)In PC (Switch) mode, press Select + Start for 3 seconds to switch.LED3 is always on

Wired Connection

Mode Connection Method LED Status
SwitchConnect the controller to the Switch via the Type-C data cable. It will be automatically recognized.Assign LED1-LED4 by player
PC (Xinput)Connect the controller to the PC via the Type-C data cable. It will be automatically recognized.LED2 is always on
PC (Switch)In PC (Xinput) mode, press Select + Start for 3 seconds to switch.LED1 is always on
Android (11.0+)In PC (Switch) mode, press Select + Start for 3 seconds to switch.LED3 is always on

Operating Instructions

Power Properties

Power Mode Status
ChargingCharging indicator LED5 is always on.
Low PowerCurrent LED1-LED4 indicator is flashing.
SleepAutomatically enters sleep mode after 5 minutes of no action.
Power OffPress and hold HOME for 5 seconds.

After entering sleep mode or Power Off, press the HOME button to wake up the controller. Short press the pairing button to turn off the controller.

Parameter Adjustment

  • Gyroscope Calibration: When in sleep mode, press Select + Home. LED1-LED4 will flash up and down. Place the gamepad on a horizontal surface and press the Start key. LED1-LED4 will all light up, indicating calibration is complete.
  • Joystick Light Mode: R3 + CAP key can modify the joystick light mode. Options include magic color automatic gradient, light color constant light, light breathing automatic color change, light same color constant light, light same color breathing, and light off.
  • Rapid Fire Setting: First, press and hold the button to set the rapid fire. Then, press and hold the TURBO key to enter semi-automatic rapid fire. Press again to enter fully automatic rapid fire, and press again to cancel the rapid fire.
  • Rapid Fire Level: TURBO + right joystick up and down can adjust the rapid fire speed.
  • Vibration Level: TURBO + left joystick up and down can adjust the vibration intensity.
  • Layout Switching: TURBO + Select can swap the key values of A and B keys, and the key values of X and Y keys.

Macro Programming Mode

Programming Mode Settings Operation
Press the same timeHold down M1 or M2, then press SelectPress the buttons to be programmed at the same time, then press M1 or M2 to end.
Press in sequenceHold down M1 or M2, then press StartPress the buttons to be programmed in sequence, then press M1 or M2 to end.

Maintenance

  • Keep the controller clean by wiping it with a soft, dry cloth.
  • Avoid exposing the controller to extreme temperatures, humidity, or direct sunlight.
  • Do not disassemble the controller, as this may void the warranty and cause damage.
  • Store the controller in a safe place when not in use to prevent accidental damage.
  • Charge the battery regularly, even if not in frequent use, to maintain battery health.

Troubleshooting

  • Controller not responding / erratic behavior (joystick/trigger/motor/gyroscope): Try pressing and holding the HOME button for 5 seconds to turn off the device, then turn it on again. If using a wired connection, try reconnecting the cable.
  • Connection issues: Ensure the controller is fully charged. For wireless connections, ensure the device's Bluetooth is on or the 2.4G receiver is properly inserted and paired. For wired connections, ensure the cable is securely connected.
  • Vibration too strong or constant: If the vibration is disruptive in certain games, you can adjust the vibration intensity using the TURBO + left joystick combination as described in the 'Parameter Adjustment' section.
  • Buttons not responding: Check if any buttons are stuck. If the issue persists, try resetting the controller by powering it off and on.

User Tips

  • The controller offers excellent grip and responsiveness, making it suitable for various gaming genres.
  • Pairing with Nintendo Switch and Switch 2 is generally easy and reliable.
  • The non-slip grips provide a comfortable and secure hold during extended gaming sessions.
  • The battery life is noted to be long, providing ample playtime.
  • The controller connects easily to PC (Linux, Batocera), Android, and iOS devices.
  • While the controller performs well, some users suggest that a clearer battery life indicator (e.g., using LEDs) would be beneficial.

Warranty and Support

For detailed warranty information and further technical assistance, please refer to the official user manual PDF or visit the ANBERNIC support website.

Official User Manual (PDF): View User Manual (PDF)

For technical support services, please visit: https://win.anbernic.com


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.