Myoslim Portable Body Sculpting Machine

1. Introduction

The Myoslim Portable Body Sculpting Machine, part of the EMSzero series, utilizes advanced HI-EMT (High-Intensity Focused Electromagnetic) technology. This device is designed to induce powerful muscle contractions, promoting muscle growth and reshaping the internal structure of muscles. It also aims to trigger significant fat breakdown through intense muscle contractions, leading to the release and metabolism of fatty acids over several weeks.

Key features include a touch-controlled display for simplified operation, real-time monitoring and guidance during treatment, and upgradeability to meet evolving therapeutic needs.

Indications for Use:

• Improvement of abdominal tone, strengthening of abdominal muscles, and development of a fitter abdomen.
• Strengthening, toning, and firming of buttocks, thighs, and calves.
• Improvement of muscle tone and firmness for strengthening muscles in arms.

2. Safety Precautions and Warnings

2.1 Operating Environment

• Clean and Hygienic: Ensure the operating environment is clean and hygienic to prevent contamination. Regular cleaning and disinfection of equipment and accessories are essential.
• Temperature and Humidity: Operate within the manufacturer's specified temperature and humidity range.
• Adequate Lighting: Provide sufficient lighting for clear visibility and correct operation.
• Good Ventilation: Ensure adequate ventilation to prevent accumulation of harmful gases.
• Safety Measures: Have fire extinguishers and first aid equipment readily available. Operators must be familiar with safety procedures.
• Avoid Interference: Keep away from strong electromagnetic fields or other interfering devices.
• Operator Training: All operators must undergo proper training on usage and safety procedures.

2.2 Patient Profile

This machine is suitable for adults seeking healthy weight loss, who have no physical diseases, and no metal substances in their bodies.

2.3 Contraindications

Do NOT use the device if any of the following apply:

• Wounds on the skin (avoiding wounds when using).
• Patients with heart disease (e.g., arrhythmias), especially those with pacemakers.
• Cancer patients.
• Patients with infectious diseases.
• Pregnant, lactating, or menstruating women.
• Major surgery patients, diabetic patients.
• Presence of any metal in the body.
• People with cerebrovascular disease (stroke patients).

2.4 Possible Side Effects

Potential side effects include, but are not limited to: muscle soreness, reduction in muscle fat, temporary muscle spasms, transient joint or muscle tendon pain, and localized redness or skin flushing.

2.5 Precautions Before Use

• Do not use when feeling full; wait at least one hour after meals.
• Remove all metal jewelry before using the instrument.
• Before starting, touch the probe vertically to the skin, turn on the main unit, and adjust intensity gradually from the lowest level according to skin tolerance.
• Do not eat or drink during operation. Wait at least one hour after operation before eating.

3. Device and Accessories

3.1 Front and Rear Panel Overview

The device features a display screen, EMS handles, and an On/OFF button on the front. The rear panel includes connections for the magnetic thin handle plug, a fuse, a switch, and the power plug.

Note: The handles are specific to the original machine and are not interchangeable.

Figure 1: Front view of the Myoslim Body Sculpting Machine, showing the display and handles.

Figure 2: Rear view of the Myoslim Body Sculpting Machine, showing power and handle connections.

3.2 List of Accessories

4. Setup

4.1 Install the Handle Bracket

1. Align the handle bracket with the designated slots on the device.
2. Use a screwdriver to secure the bracket on both sides.

4.2 Apply Handle Film

1. Peel off the protective film (black film).
2. Stick the film onto the working part of the handle.

4.3 Install the Handles

1. Align the handle connector with the hole on the device and fasten the clip.
2. Lock the key ring to secure the handle.

4.4 Connect Power

1. Connect one end of the power cable to the machine.
2. Connect the other end of the power cable to a power socket.

4.5 Power On

1. Press the switch on the back of the machine (light will turn on).
2. Press the power button on the front of the machine (single click for power on).

5. Operating Instructions

5.1 Handle Exchange

The handle must be calibrated every time it is installed or replaced. Always turn off the power of the machine before replacing handles. Handles cannot be replaced while the machine is powered on.

5.2 Device Start-up/Shut-down

1. Connect the power cord to the machine and a main power socket. Do not connect multiple machines to one socket.
2. Move the manual switch on the rear panel to the "o" position (power on).
3. Press the power button on the front panel.
4. To shut down, press and hold the power button on the front panel until the machine turns off.

5.3 Navigation Controls and Therapy Settings

The pre-treatment regimen can be modified via on-screen controls. The treatment interface displays navigation controls, channel selectors, stop therapy button, start/pause therapy button, and settings for therapy parameters.

Setting Therapy by Controls:

1. Mode Selection: Select "Mode 1" or "Mode 2" from the main menu.
2. Handle Preparation: Take out the handle from its frame and use the provided belt to fix it to the desired treatment area on the customer.
3. Parameter Adjustment:
   • Adjust handle RF energy regulation.
   • Adjust handle strength.
   • Set treatment time.
   • For Mode 2, adjust frequency periods (3 different periods available).
4. Start/Pause: Click the start/pause button to begin or pause the treatment.
5. Stop: Click the stop working button to end the treatment.
6. Return: Click the back button to return to the previous screen.

Single Handle Operation: To use only one handle, pull the intensity of the unused handle to its lowest value (zero). If handle 1's intensity is zero, handle B works alone. If handle 2's intensity is zero, handle A works alone.

5.4 Therapy Application

Ensure the handle is aligned with the operating part and attached, and then press the start button on the screen to start the operation; Lightly place the handle on the handle holder after use.

Preparing for Therapy:

• Communicate with patients about the procedure.
• Ensure the patient is in good health.
• Patient should be well-hydrated.
• Patient should wear appropriate clothing.
• Avoid eating large quantities before treatment.
• Operator should be familiar with the treatment process.
• Avoid drinking alcohol before treatment.

Placing the Handle: The handles can be placed on various body parts including the belly, buttocks, arms, thighs, calves, and arse (pelvic floor/gluteal area). Secure the handles with the provided belts as shown in the diagrams in the full user manual (PDF).

6. Maintenance

6.1 Daily Inspection

Regularly inspect instruments and components. Check for reliable power socket connection and ground. Inspect the power cord for damage before each use; discontinue use if damaged.

6.2 Cleaning

• Device Surface: Wipe the device housing with a damp cloth, soapy water, or a neutral detergent while the instrument is powered off. Do not use alcohol-based detergents on painted parts.
• Accessories in Contact with Patient: Clean and disinfect parts that come into contact with the skin using 75% alcohol before and after each use. Do not soak accessories directly in alcohol-based detergent; wipe with pure cotton material.

6.3 Fuse Replacement

The fuse is located below the handle junction on the back of the machine. A spare fuse is included. To prevent electric shock, turn off and unplug the power plug before replacing the fuse.

6.4 Transport and Storage

• Storage: Store the instrument in its original packaging box in a well-ventilated room. Ambient temperature: -10°C to 40°C. Relative humidity: ≤93%. Keep away from flammable, explosive, and corrosive gases/substances.
• Transportation: Suitable for road, railway, air, and water transport in its packaging. Prevent severe vibration, shock, and moisture. Do not mix with flammable or corrosive substances.

7. Troubleshooting

8. Specifications

8.1 Electromagnetic Compatibility (EMC)

The device complies with IEC 61000-4-3:2020 for radiated electromagnetic field immunity, tested at 30V/m with 80% AM, 1kHz Modulation.

9. Warranty and Support

9.1 Warranty Card Information

• Replacement: The machine can be replaced with a new one within 7 days of purchase (with receipt) if intact.
• Main Unit Warranty: 1 year (excluding fragile parts and non-warranty scope/expired period). Maintenance and updates are chargeable.
• Accessories Warranty: 3 months (excluding man-made damage).
• Repair Costs: If the instrument needs repair within six months of purchase, the buyer bears return shipping, and the seller bears shipping in cost. After six months, the buyer bears all shipping costs.

Free warranty service is NOT provided for failures due to: unauthorized disassembly/modification, accidental falls, lack of reasonable maintenance, or failure to operate according to the instruction manual.

9.2 Manufacturer

Guangzhou Xinwei Electronic Technology Co., Ltd.

For service or support, please contact the manufacturer or your dealer directly. Do not attempt unauthorized repairs.

10. User Tips

Based on common user inquiries, ensure you understand all local import duties and taxes, as these may apply in addition to the product price. Always consult the full PDF manual for detailed diagrams and specific instructions for optimal use and safety.

The full user manual (PDF) can be found here.