XIAOMI B502CN

Contents

XIAOMI MIJIA Handheld Garment Steamer

User Manual - Model B502CN

Introduction

Thank you for purchasing the XIAOMI MIJIA Handheld Garment Steamer. This manual provides important information on the safe and efficient use of your appliance. Please read it carefully before use and retain it for future reference.

XIAOMI MIJIA Handheld Garment Steamer on its base with usage examples

XIAOMI MIJIA Handheld Garment Steamer (Model B502CN)

Safety Instructions

Always observe the following safety precautions to reduce risks of errors, electric shocks, injuries, fires, deaths, and damage to equipment or property.

  • This steam iron is intended for household use only.
  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the appliance.
  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  • The glove is a giveaway. It is not a professional protective glove and do not use it for professional protection.
  • When using the steam iron, make sure to prevent danger due to steam sprays.

Power Cord and Power Plug Safety

  • Do not use the steam iron if the power plug that is plugged into the electrical outlet is loose, or if the power cord or plug is damaged or becomes hot. Otherwise, it may cause burns, electric shocks, or fire due to short circuits.
  • Do not insert or remove the power plug with wet hands to avoid electric shocks and injuries.
  • Do not use the steam iron if the power cord is tied together; otherwise, it may cause electric shocks or fire due to short circuits.
  • Do not damage, modify, forcefully bend, pull, twist, or squeeze the power cord, nor place heavy objects on top of it; otherwise, it may cause electric shocks or fire due to short circuits.
  • Always unplug the steam iron by pulling the power plug rather than the cord. Otherwise, the power cord may break, causing burns, electric shocks, or fire due to short circuits.
  • Ensure the power plug is completely plugged into a 220-240 V~ electrical outlet. Do not overload the electrical outlet or circuit to avoid electric shocks or fire due to short circuits.

Usage and Storage Safety

  • Avoid dropping the steam iron or subjecting it to strong impacts. Do not use the steam iron if it experiences a fall that results in visible damage or leakage.
  • Do not use the steam iron if the ironing soleplate gets damaged, or it may cause the clothing to be worn or scratched.
  • Do not add hot water, detergent, perfume, starch, or other chemicals to the water tank; otherwise, the tank will be deformed, which may cause explosions or fire due to short circuits.
  • Do not use the steam iron with wet hands to prevent electric shocks or fire due to short circuits.
  • The iron must not be left unattended while it is connected to the supply mains.
  • During use, the ironing soleplate and the plastic components around it are relatively hot. Do not touch them with your hands to prevent burns and scalds.
  • Do not aim the ironing soleplate at people or animals during use, as it will release high-temperature steam. Maintain a safe distance between the steam iron and children, infants, and animals during use to prevent steam scalds.
  • Do not block the steam outlets or insert foreign objects into them to avoid burns, scalds, electric shocks, or fire due to short circuits.
  • While ironing, do not let the ironing soleplate rest on the surface of the clothes for an extended period.
  • Do not immerse the steam iron in water.
  • Do not touch any remaining water droplets that may flow out of the steam iron's pipeline after steam ironing to prevent burns and scalds.
  • Do not store the steam iron within the reach of children and infants. This steam iron is not a toy. Keep children away from it during use to avoid electric shocks and injuries.
  • Do not repair, disassemble, or modify this steam iron on your own. If repairs are needed, contact the after-sales service team.
  • Before using the steam iron, ensure the cover of the water tank is secured in place to prevent electric shocks or damage to the steam iron.
  • Always unplug the steam iron when adding water, cleaning it, and turning it off.
  • The steam iron must be used with the base (model: B502CN-DZ) included.
  • The steam iron must be used on a stable surface for horizontal ironing.
  • If the steam iron does not generate steam, fails to heat up, has a large amount of water overflowing, gives off smoke, emits a burning smell, or experiences other malfunctions or errors, stop using it immediately.
  • Care should be taken when using the appliance due to the emission of steam.
  • Unplug the appliance during filling and cleaning.
  • The handheld steam iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
  • The filling, or decalcifying, or rinsing, or inspection apertures that are under pressure shall not be opened during use.
  • When placing the iron on its base, ensure that the surface on which the base is placed is stable.

Product Overview

Familiarize yourself with the components of your XIAOMI MIJIA Handheld Garment Steamer.

Diagram of steamer components

Main unit and accessories

Main Unit Components:

  • On/Off Switch: Powers the device on or off.
  • Steam Button: Activates continuous steam.
  • Indicator: Shows heating status and errors.
  • Handle: For gripping the steamer.
  • Steam Boost Button: Delivers a powerful burst of steam.
  • Ironing Soleplate: The heated surface for ironing.
  • Water Tank: Holds water for steaming.
  • Water Tank Cover: Seals the water tank.

Accessories:

  • Water Tank: (Pre-installed)
  • Base: For resting the steamer.
  • Glove: For protection during use.

Indicator Status Description:

Indicator Status Steam Iron Status
Breathing white Heating
White Heating completed
Breathing red High-temperature alarm/internal error
Red On standby

Setup

1. Adding Water

  1. Remove the water tank: Hold the water tank and pull it up vertically to remove it.
  2. Fill the tank with water: Open the water tank cover and add purified water to the tank. It is recommended to use purified water to prevent scale build-up.
  3. Close the water tank cover: Ensure it is closed tightly to avoid overflow.
  4. Install the water tank: Hold the water tank against the steam iron and press it down vertically until you hear a "click", indicating it's securely installed.
Close-up of water tank being filled

Filling the water tank

2. Turning On

  1. Place the steam iron on its base and plug the power cord into an electrical outlet (220-240V~).
  2. Toggle the on/off switch from "O" to "I" to turn on the steam iron. The indicator will breathe white, indicating heating.
  3. After approximately 30 seconds, the indicator will turn solid white, signifying heating is complete. The steamer is now ready for use.
  4. If the temperature drops during use, the indicator will breathe white again as it reheats.

Caution: While heating, do not unlock and press the steam boost button to prevent scalding from hot spray.

Operating Instructions

The steam iron offers dry ironing, wet ironing, and steam boost modes.

Dry Ironing Mode

Once heating is complete (indicator is solid white), the steamer can be used for dry ironing. This mode is ideal for wrinkle removal and shaping dry clothes, or for drying damp clothes.

Wet Ironing Mode

After heating is complete, press the Steam Button to enter wet ironing mode. The steamer will emit continuous steam. Press the Steam Button again to stop steaming.

Steamer head emitting steam

Steamer in action

Steam Boost Mode

  1. Toggle the Steam Boost Button to unlock it.
  2. Press the button to emit a powerful burst of steam.
  3. When not using this mode, toggle the button back to lock it to prevent accidental activation.

Note: Do not press the steam boost button too often (interval less than 5 seconds) to avoid water droplets. This mode is best for thicker fabrics or stubborn wrinkles. Keep the steamer close to the clothes for best results.

Person using steamer on a coat

Using the steamer on garments

Pausing

To pause operation, press the Steam Button to stop emitting steam. Do not press the Steam Boost Button. Place the steamer properly and steadily on its base.

Note: If idle for more than 8 minutes, the steamer automatically stops heating and enters standby (indicator turns red). Move the steamer to resume heating.

Turning Off

  1. Before turning off, remove and empty the water tank.
  2. Enable wet ironing or steam boost mode to drain any remaining water from the internal pipeline.
  3. Press the Steam Button to stop steam, lock the Steam Boost Button, and toggle the on/off switch from "I" to "O".
  4. Unplug the power cord and reinstall the water tank.
  5. Place the steamer on its base and allow it to cool down completely (approx. 1 hour) before storing.

Product Demonstration Video

Official product video demonstrating the steamer's use on a shirt.

Care & Maintenance

Water Tank Cleaning:

  • Regularly rinse and completely dry the water tank to prevent scale build-up.
  • Remove the water tank, open its cover, and rinse the interior and exterior with clean water.
  • Leave the water tank to dry in a cool place.
  • Caution: Do not clean the water tank with detergent to avoid deforming it.

Ironing Soleplate Cleaning:

  • Once the steam iron has completely cooled down after use, wipe the ironing soleplate with a soft damp cloth.
  • Ensure steam outlets are clean, scale-free, and unblocked.
  • Keep the ironing soleplate facing up while cleaning.
  • Caution: Ensure the steam iron is disconnected from power and completely cooled before maintenance.

Troubleshooting

Error Possible Causes Solutions
Indicator does not light up On/off switch is off
Electrical outlet is loose
Internal error
Toggle on/off switch
Replace electrical outlet
Contact after-sales service
Indicator breathes red High-temperature alarm
Internal error
Restart after cooling
Contact after-sales service
Indicator remains red Steamer in standby (idle > 8 min) Move steamer to restart heating
Water tank leaks Tank cover not closed
Seal ring ages
Close tank cover properly
Contact after-sales service
Loud water-pumping noise Water pump working (normal)
Water tank empty
Water tank not installed
No action needed
Fill water tank
Install water tank properly

Specifications

Name Handheld Steam Iron
Model B502CN
Rated Voltage 220-240 V~
Rated Frequency 50-60 Hz
Rated Power 1200 W
Water Tank Capacity 150 ml
Protection Against Electric Shock Class I
Net Weight 840 g
Item Dimensions (Steamer) 245 × 78 × 95 mm
Item Dimensions (Base) 184 × 90 × 79 mm
Anti Dry Burning Support Yes
Certification CB, CE

User Tips

  • Water Tank Capacity: The 150ml water tank may require refilling after steaming 2-3 garments. Keep this in mind for larger loads.
  • Versatility: This device can be used effectively as both a handheld steamer and a traditional iron for flat ironing.
  • Quick Heat-up: The steamer heats up very quickly, making it convenient for last-minute touch-ups.
  • Effective on Tough Fabrics: Users report it smooths out even jeans without trouble.
  • Travel-Friendly: Its compact size and light weight make it an excellent choice for travel or use in hotels/guesthouses.

Warranty & Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official XIAOMI website for your region. Do not attempt to repair the device yourself.

Manufacturer: Ningbo Lofans Home Appliance Co., Ltd. (a Mi Ecosystem company)

© 2024 XIAOMI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.