1. Introduction
Dear valued customer,
Thank you for choosing our high-quality Dashcam product. This product utilizes mainstream high-end Dashcam chips as the main control encoding and decoding chip, providing you with truly high-definition driving recording footage.
Designed with the structure of vehicles in mind, this product is compact, elegant, and tailored for specific car models, allowing for a completely hidden installation. Users can easily install and configure it themselves.
Equipped with a high-performance, low-light HD image sensor and a unique installation design, this Dashcam can be adapted to various vehicle models, bringing convenience, safety, and vibrancy to your daily life. It captures high-definition video at up to 30 frames per second (fps), with optional audio recording for dynamic footage. It features automatic overwrite and loop recording functions, eliminating concerns about memory card capacity. It also supports playback of recorded video clips and is compatible with external memory cards up to 128GB (TF card).
This versatile technological innovation is primarily designed for in-vehicle driving recording, serving as an effective tool for enhancing road safety and accident evidence collection.
Before using this product, please read this user manual carefully and keep it in a safe place. We hope this product meets your needs and serves you well for a long time!
2. Product Overview
The Onedo 4 Channel Hidden Dash Cam offers comprehensive vehicle monitoring with its multi-lens system and advanced features.
Key Features:
- Four-Lens Full Vehicle Monitoring: Records front, back, left, and right simultaneously.
- Super Infrared Night Vision: Enhanced clarity in low-light conditions.
- APP Mobile Internet: Connect to smartphone apps for viewing and control.
- 360° Panoramic Recording: Comprehensive coverage around the vehicle.
- 24-Hour Parking Monitoring: Continuous surveillance when the engine is off.
- F1.5 Super Large Aperture: Ensures clearer night imaging.
- Collision Automatic Locking: Important video information is automatically saved and protected.
- 0 Traffic WiFi Connectivity: Connect to smartphone apps without using mobile data.
3. Package Contents
Please check the package for the following items:
- Main Dash Cam Unit (with integrated front, left, and right lenses)
- Rear Camera (if included in your model)
- Cigarette Lighter Power Supply Cable (may require separate purchase)
- Fuse Box Power Supply (Hardwiring Kit, typically default)
- Rear Camera Connection Cable
- User Manual
- Other mounting accessories (e.g., adhesive pads, cable clips)
4. Installation
4.1. Main Unit and Power Supply Installation
We do not recommend using your own power supply and cables. If you encounter issues such as abnormal camera images or the rear camera not displaying, please replace the power supply and cables with ones that meet the requirement of DC 5V/2.5A.
The Dashcam requires the power supply we provide to operate stably and reliably. We offer two power supply options:
Cigarette Lighter Power Supply (Requires separate purchase)
- Advantages: Easy to install; simply plug it into the car's cigarette lighter socket.
- Limitations: The Dashcam will not receive power when the car is turned off, so the parking monitoring feature cannot be used.
- Installation: Hide the connection line along the front windshield into the ceiling and route it to the central control cigarette lighter through the lower part of the passenger storage compartment.
Fuse Box Power Supply (Hardwiring Kit, Default)
- Advantages: Allows continuous recording even when the car is turned off, enabling 24/7 monitoring. Equipped with a dedicated chip that automatically cuts off power when the car battery voltage is low, protecting the battery.
- Limitations: Requires manual installation and wiring to connect to the car's fuse box.
Fuse Box Power Supply Installation Steps:
Important Notice: Due to variations in vehicle models, professional installation is strongly recommended. These instructions are for reference only.
- Locate Fuse Box: Refer to your vehicle's owner's manual for the exact position of the fuse box.
- Connect Wires:
- Connect the yellow power cable to the 12V constant power supply (a fuse slot that is always live).
- Connect the red ACC ignition control wire to an ACC fuse slot (a fuse slot that is only live when the ignition is on).
- Connect the black wire to a metal ground bolt/screw on the vehicle chassis.
- Test Power: Start the car engine. When the blue light on the dashcam turns on and starts flashing, the device will power up and enter automatic recording mode.
4.2. Rear Camera Installation
Ensure the power cable is properly connected to the dashcam, and the red wires from the rear camera are connected to the reverse light.
You have two options for rear camera placement:
- Inside the Windshield: Install the rear camera above the inside of the rear windshield.
- Above License Plate: Install the rear camera above the license plate light at the rear of the vehicle.
4.3. Micro SD Card Installation
The dash cam does not have built-in storage. To enable normal recording, you must correctly insert a Micro SD card (TF card) into the dash cam's card slot.
- Use a high-speed Micro SD card with a capacity of no less than 8GB. The maximum supported Micro SD card capacity is 128GB.
- To ensure stable multi-channel video recording, use a brand SD card of at least V30 class or higher. For 4K video recording, a high-speed brand SD card of V90 class or higher is required (authentic SanDisk or Samsung SD cards are recommended).
- If the memory card's write speed does not meet the requirements for 4K or 1080P video, the device will automatically downgrade to recording 1080P or 720P video.
- Insert the Micro SD card in the correct orientation. Reverse insertion may damage the device/card.
- After inserting the Micro SD card, it will become the default storage space. Data previously stored on the Micro SD card may become inaccessible.
5. Operation
5.1. Button Functions
- RESET: Reset hole for restarting the device in case of a freeze.
- OK Button:
- Long Press (2 Seconds): Cycles through modes (Recording, Photo, Playback).
- Short Press (1 Second): Starts/stops recording (Recording Mode), captures a photo (Photo Mode), plays/pauses video (Playback Mode).
- Up Button:
- Short Press (Menu/Playback Mode): Navigates upward in System Menus, Video Playback Lists, Photo Galleries.
- Short Press (Live Recording Preview): Toggles WiFi connectivity (Enable/Disable).
- Mode/Menu Button:
- Function 1 (Mode Switch): In standby mode, short press to switch between different modes (Recording/Photo/Playback).
- Function 2 (Menu Function): In standby mode, long press for 2 seconds to enter the main menu settings.
- Down Button:
- Short Press (Menu/Playback Mode): Navigates downward in System Menus, Video Playback Lists, Photo Galleries.
- Short Press (Live Recording Preview): Cycles through camera views (Front, Left, Right, Rear - if equipped).
- Power Button:
- Power On/Off: Long press for 3 seconds to turn the device on/off.
- Screen Protection: When the device is on, a single press will turn off/on the screen.
5.2. Indicator Light Instructions
- Blue Light Flashing: The device is recording.
- Blue Light Solid: Recording has stopped; the device is in standby mode.
- Blue Light Fast Flashing: The device is updating its firmware.
5.3. Auto-Recording Function
- Automatic Startup: The dash cam powers on automatically when the vehicle engine starts, with the charging indicator illuminated and recording indicator flashing.
- Recording Management:
- Videos are saved in segmented files on the TF card.
- Older recordings are automatically overwritten when the card is full (unless Loop Recording is set to OFF).
- Segment duration settings (selectable via settings-Loop recording): 1 min / 2 min / 3 min / 5 min / OFF.
- Important Notes:
- When 1/2/3/5 min is selected, automatic overwrite occurs when the TF card is full.
- When OFF is selected, it saves 5-min files without overwriting but stops recording when the card is full.
- Critical Warning: Do not insert/remove the TF card while powered on. This may cause card corruption or data loss.
5.4. Date & Time Settings
- Enter Settings Menu: In standby mode, long-press the [M] button for 2 seconds to access settings. Short-press [M] to navigate to system settings.
- Navigate to Date/Time: Use the Up/Down buttons to highlight "Date & Time". Short-press [OK] to enter adjustment mode.
- Adjust Values: Use Up/Down buttons to modify numbers. Press [Mode] button to switch between Year → Month → Day, and Hour → Minute.
- Save & Exit: Press [OK] to confirm.
Important: Set accurate time before first use for valid accident evidence timestamps.
5.5. Voice Control Commands
This feature currently supports Chinese commands only.
- "关闭屏幕" (Turn off screen)
- "打开屏幕" (Turn on screen)
- "打开前录" (Start front recording)
- “打开后录" (Start rear recording)
- "打开录音" (Enable audio recording)
- “关闭录音" (Disable audio recording)
- “我要拍照" (Take a photo)
5.6. Rearview Camera (Reverse Assist)
When powered on, the dashcam will automatically start recording. In any mode, if the vehicle is put into reverse, the rearview image will be displayed. After reversing, the dashcam will automatically return to recording mode.
- Locked video files start with
LOC_, while regular recordings start withMOV_. - The collision sensor (G-sensor) supports sensitivity adjustment (High, Medium, Low, Off). Adjust it in the settings menu as needed.
5.7. Motion Detection
In motion detection mode, the dashcam will start recording when movement is detected. If no movement is detected for 30 seconds, recording will stop. To exit motion detection mode, simply turn off the motion detection feature.
5.8. Gravity Sensor Function (G-Sensor)
Collision Detection & Locking: When a severe collision is detected, the dashcam automatically locks the relevant video segment (duration matches current loop recording setting). Protected files cannot be overwritten.
- File Naming: Locked files:
LOC_XXXX, Normal files:MOV_XXXX. - Sensitivity Adjustment: Available settings: High/Medium/Low/Off.
5.9. Parking Surveillance Mode (Requires Hardwiring Kit)
When activated while the device is powered off, the G-Sensor detects minor vehicle vibrations. The dashcam will power on, record a 30-second video clip, and then power down. If another impact is detected after 1 minute, the cycle repeats.
File Protection: All parking surveillance recordings are automatically locked and protected from being overwritten during loop recording.
5.10. Time-Lapse Recording (Requires Hardwiring Kit)
- When Time-Lapse is OFF:
- Device operates in normal loop recording mode.
- Automatically powers off when vehicle ignition is turned off (ACC disconnected) or ACC power line is cut.
- When Time-Lapse is ON:
- Normal loop recording while driving.
- Automatically switches to time-lapse recording mode when ACC ignition line is disconnected.
- Continues loop recording in time-lapse mode.
- Important Notes:
- Screen Behavior: Blank screen indicates power-saving mode (screen saver active).
- No TF Card Installed: No pop-up notifications will appear, and time-lapse mode will not activate.
6. Maintenance
- For optimal performance, we recommend formatting the Micro SD card once per month.
- Regularly check cable connections to ensure they are secure.
- Keep the camera lenses clean for clear recording quality.
7. Troubleshooting (FAQ)
7.1. Rear Camera Not Displaying or One Camera Displaying Abnormally
- Check the connections between the rear camera and its cable, as well as between the cable and the dashcam, to ensure they are securely attached.
- Verify that the power supply is compatible. We recommend using the power supply included in the packaging, as it ensures stable performance. If you must use a third-party power supply, ensure it provides 5V and can consistently deliver a current of greater than 2.5A.
- Check whether your Type-C cable supports a current transmission of greater than 2.5A (do not use a three-in-one charging cable).
7.2. App Connectivity Issues
If you are experiencing difficulty connecting the app:
- First-Time Use: Scan the QR code below with your smartphone to download the official app.
- Enable WiFi Hotspot: In the dashcam's settings menu, turn on the WiFi hotspot. Once enabled, the hotspot name (SSID) and password will be displayed on the recording screen.
- Connect to WiFi: On your smartphone, go to the WiFi settings, find the dashcam's WiFi hotspot, and connect using the default password:
12345678. - Complete Setup: After connecting, open the app. The dashcam's time will sync with your smartphone's current time. Use the app to format the Micro SD card.
- Note: If the WiFi hotspot is not connected within 5 minutes, it will automatically turn off.
8. Specifications
| Feature | Description |
|---|---|
| Product Name | Four-Channel Dashcam |
| Product Features | High-definition camera, HD recording |
| Lens | A+ grade high-resolution ultra-wide-angle lens |
| Resolution | 4K/2K/1080P/720P |
| Image quality | 12M/10M/8M/5M/3M/2M/1.3M |
| File Format | MOV |
| Video Format | H.264 |
| Photo Format | JPEG |
| Auto Power On/Off | Supports auto power-on when the car starts and auto power-off when the car stops (optional motherboard feature) |
| Language Support | English / Traditional Chinese (繁體中文) / Simplified Chinese (简体中文) / Japanese (日本語) / French (Français) / German (Deutsch) / Korean (한국어) / Italian (Italiano) / Portuguese (Português) / Russian (Русский) (etc.) |
| Loop Recording | Seamless loop recording without missing seconds |
| Motion Detection | Supported |
| G-Sensor | 3-Axis Collision Detection |
| Parking Monitoring | Supported |
| Time-Lapse Recording | Supported |
| Light Frequency | 50Hz/60Hz |
| Date/Time Stamp | Supported |
| Audio Recording Switch | Supported |
| Memory Cards | Micro SD Card, 8-128GB, V30/U3 or Higher |
| Audio | Built-in mic & speaker |
| WiFi | Supported |
| Power Input | 5V/2.5A |
Note: Specifications subject to change without notice.
9. User Tips
- SD Card Quality: For optimal 4K recording, invest in a V90-grade Micro SD card from a reputable brand like SanDisk or Samsung. Lower-grade cards may result in automatic resolution downgrade.
- Cable Length: The rear camera cable length is generally suitable for sedans. For larger vehicles like SUVs or trucks, you might need to purchase an extender.
- Fuse Box Wiring: If hardwiring to the fuse box, be aware that some vehicles (e.g., certain F-150 models) use micro fuses, requiring adapters. Also, some fuse positions might be always hot, meaning you may need to wire an external switch for accessory on/off power if your vehicle lacks a suitable ACC fuse.
- Screen Readability: The built-in display can be small, making menu text difficult to read. Consider using the mobile app for easier navigation and settings adjustments.
- Fixed Mounting: The dashcam is designed for fixed mounting to the windshield. If you need to view the screen up close, rely on the mobile app as the unit cannot be easily detached.
- App Connection: If you encounter issues with the app, ensure the dashcam's WiFi hotspot is enabled and your phone is connected to it using the default password (12345678). The hotspot automatically turns off after 5 minutes of inactivity.
10. Support
For further assistance, technical support, or inquiries regarding your Onedo 4 Channel Hidden Dash Cam, please refer to the official product page or contact the seller directly through the platform where you made your purchase.
A PDF version of this user manual is available for download: View User Manual (PDF)