NYXI Wizard

Contents

NYXI Wizard Wireless Game Controller

Product Instruction Manual

Model: Wizard

Dear Player,

Thank you for purchasing the NYXI Wizard Wireless Game Controller. For a better gaming experience, please fully charge the controller when using it for the first time. Before use, please read this manual carefully to ensure proper setup and operation.

NYXI Wizard Wireless Game Controller, front view

Image: Front view of the NYXI Wizard Wireless Game Controller in black.

Video: Official product showcase of the NYXI Wizard controller, highlighting its features, design, and compatibility.

1. Package Contents

  • Left-hand Controller x 1
  • Right-hand Controller x 1
  • Charging Cable x 1
  • Instruction Manual x 1
  • Intermediate Bridge x 1
  • Round Replacement Rocker Ring x 2

Image: Contents of the NYXI Wizard package including the left and right controllers, charging cable, manual, intermediate bridge, and replacement rocker rings.

2. Product Specifications

MaterialABS
BatteryBuilt-in 500mAh Lithium Battery (single-sided)
Charging Input5V 1A
Charging TimeApproximately 3 hours
Usage TimeApproximately 8 hours
Wireless DistanceUp to 10 meters
Interface TypeBluetooth
Compatible PlatformsNintendo Switch, PC, Steam (Nintendo Switch, Nintendo Switch OLED, Nintendo Switch Lite)
Joystick Sensor ModuleHall Effect
Trigger Button TypeLinear
Switch Types (D-pad, ABXY, Bumpers)Membrane
FeaturesWear-resistant joysticks, RGB lighting joysticks
CertificationsCE, FCC, RoHS, pse

3. Product Overview and Button Layout

The NYXI Wizard controller features a classic GameCube-inspired layout with modern enhancements. Below is a description of the main buttons and components:

3.1 Front View (Left Controller)

  • TURBO Indicator: Shows Turbo status.
  • FL Indicator: Front Left indicator.
  • Minus (-) Button: System function button.
  • Left 3D Ring: Surrounds the Left Stick.
  • Capture Button: For taking screenshots/videos.
  • Profile Button: For custom settings.
  • Left Stick: Main left analog stick.
  • Directional Buttons (D-pad): Up, Down, Left, Right.
  • TURBO Button: Activates Turbo function.
  • Type-C Port: For charging and wired connection.
  • SL/SR Buttons: Side buttons for detached use.
  • LED: Channel indicator.
  • SYNC Button: For pairing.

3.2 Front View (Right Controller)

  • TURBO Indicator: Shows Turbo status.
  • FL Indicator: Front Right indicator.
  • Plus (+) Button: System function button.
  • Y Button: Action button.
  • HOME Button: System menu button.
  • X Button: Action button.
  • A Button: Action button.
  • B Button: Action button.
  • Profile Button: For custom settings.
  • Right Stick: Main right analog stick.
  • Right 3D Ring: Surrounds the Right Stick.
  • TURBO Button: Activates Turbo function.
  • Type-C Port: For charging and wired connection.
  • SL/SR Buttons: Side buttons for detached use.

3.3 Top/Rear View (Both Controllers)

  • R Button: Right shoulder button.
  • ZR Button: Right trigger button.
  • Release Button: For detaching from console/bridge.
  • FR Button: Front Right custom button.
  • L Button: Left shoulder button.
  • ZL Button: Left trigger button.
  • FL Button: Front Left custom button.

Image: Detailed schematic of the NYXI Wizard controller showing all buttons and their labels on the front, top, and rear surfaces.

4. Setup and First Use

4.1 Charging Instructions

  1. When the controller is turned off and charging, the LEDs will flash. They will turn off once fully charged.
  2. During wireless connection, the corresponding channel light will flash slowly while charging and remain solid when fully charged.
  3. The controller can be charged by attaching it to the Nintendo Switch console, which is then connected to a power adapter. If the console is not connected to a power adapter, it will charge the controller when the controller's voltage drops below 3.7V.
  4. A low battery alarm (controller voltage below 3.3V) will cause the corresponding channel light to flash, indicating the need for charging.

4.2 Connecting the Controller

4.2.1 Wired Direct Connection

To use the controller in wired mode, simply attach the left and right controllers to the Nintendo Switch console. Ensure they click into place securely.

NYXI Wizard controllers attached to a Nintendo Switch

Image: NYXI Wizard controllers attached directly to a Nintendo Switch console in handheld mode.

4.2.2 Wireless Connection

  1. On your Nintendo Switch console, go to the HOME Menu.
  2. Select "Controllers" > "Change Grip/Order".
  3. On the NYXI Wizard controller, long press the SYNC button.
  4. The four channel lights on the controller will flash, indicating it is in pairing mode.
  5. The controller will automatically connect to the console once pairing is successful.

Image: Diagram showing a hand pressing the SYNC button on the right NYXI Wizard controller, with the Nintendo Switch screen displaying the "Change Grip/Order" menu.

4.3 Wake Up Function

Except for the L3, R3, TURBO, Profile, FL, and FR buttons, any other button can be pressed to wake up the controller and enter pairing mode. Note: Do not touch the 3D joysticks during the connection process to avoid calibration issues.

5. Operating Instructions

5.1 Turbo and Speed Adjustment

5.1.1 Setting Turbo Mode

  • Press TURBO + any settable function button (Up, Down, Left, Right, A, B, X, Y, L, R, ZL, ZR) to assign Turbo to that button.

5.1.2 Continuous Turbo Mode

  • Press TURBO + assigned button once for manual continuous fire.
  • Press TURBO + assigned button twice for automatic continuous fire.
  • Press TURBO + assigned button three times to turn off continuous fire.
  • To cancel Turbo for all buttons, long press the TURBO button for three seconds.

5.1.3 Turbo Speed Adjustment

  • For the left controller: Press TURBO + Minus (-) button to adjust speed.
  • For the right controller: Press TURBO + Plus (+) button to adjust speed.
  • Available speeds: 5HZ, 12HZ, 20HZ. Default speed is 12HZ.

5.1.4 Turbo Setting Indicator

The LED lights up white when Turbo is not set. After setting, the LED turns blue. The blue light flashes according to the burst speed when Turbo is active.

5.2 Back-Button Mapping and Macro Programming

(The controller must be connected. Please cancel any continuous Turbo settings before programming.)

5.2.1 Back-Button Mapping Setting Method

  • Left Back Button (FL): Press Profile + any settable button on the left controller (Up, Down, Left, Right, L, ZL, L3, VRL) + Profile.
  • Right Back Button (FR): Press Profile + any settable button on the right controller (A, B, X, Y, R, ZR, R3, VRR) + Profile.

5.2.2 Back-Button Macro Programming

The FL and FR buttons can record up to 21 button values. The output will follow the time interval of your input sequence.

5.2.3 Back-Button Setting Indicator

When you first press the Profile button for setting, the LED will change from white to blue and flash. After the setting is complete, the Profile indicator LED will remain blue.

5.2.4 Clear Back-Button Settings

While connected to the host, hold both the left and right controller's Profile buttons for 3 seconds. The original functions set on the FL and FR buttons will be cleared, and the LED will turn to a solid white light.

5.3 Motor Vibration Adjustment

5.3.1 Adjustment Method

While connected, press TURBO + (corresponding) rocker up or down (up to enhance, down to weaken). A 2-second vibration prompt will confirm successful adjustment.

5.3.2 Vibration Levels

100% - 70% - 30% - 0%. The default vibration level is 70%.

5.4 ABXY Light Adjustment

  • To turn the light effect on/off: While connected, press TURBO + double-click the Right Stick.
  • To adjust brightness: While connected, press TURBO + long press the Right Stick.

5.5 Factory Setting "Lock Mode"

5.5.1 Setting Method

When the controller is in sleep mode, press and hold the "SL" and "SYNC" buttons for 5 seconds. The channel indicator LED1 will light up and flash slowly 3 times.

5.5.2 Unlocked Mode

To unlock, charge the controller with a USB cable while it is mounted on the Switch console rail.

5.6 Rocker Ring Replacement

The NYXI Wizard controller features interchangeable joystick rings. Follow these steps to replace them:

  1. Identify Alignment: Locate the rocker ring pins, handle alignment point, and rocker ring alignment line.
  2. Rotate to Unlock: Counterclockwise rotate the rocker ring until its alignment line and the handle alignment point form a 45-degree angle.
  3. Remove Ring: Pull up the rocker ring and rocker cap vertically to detach them.
  4. Install New Cap: Press the new rocker cap against the 3D lever.
  5. Align New Ring: Place the new rocker ring pins against the handle alignment point as shown in the diagram and press down.
  6. Rotate to Lock: Rotate the rocker ring 45 degrees clockwise to align its alignment line with the handle alignment point to complete the replacement.

Image: Series of diagrams illustrating the steps for rocker ring replacement, including alignment points, rotation, and removal/installation.

5.7 Calibrating the Joysticks

If you experience drift or inaccurate joystick input, you can calibrate them via the Nintendo Switch system settings:

  1. From the HOME Menu, select "System Settings".
  2. Scroll down and select "Controllers and Sensors".
  3. Select "Calibrate Control Sticks".
  4. Follow the on-screen prompts: press the "X" button, then the "A" button.
  5. Move the joystick to be calibrated through its full range of motion (up, down, left, right, and full circles) as instructed on the screen.

Note: If the cursor bounces outside the innermost circle during calibration, press "B" to exit and try again.

Image: Screenshot of the Nintendo Switch "Calibrate Control Sticks" screen, showing a crosshair and instructions to move the stick.

6. Maintenance

  • Keep the controller clean by wiping it with a soft, dry cloth.
  • Avoid exposing the controller to extreme temperatures, humidity, or direct sunlight.
  • Do not use abrasive cleaners or solvents on the controller.
  • Store the controller in a safe place to prevent physical damage when not in use.

7. Troubleshooting

7.1 Controller Not Connecting

  • Ensure the controller is fully charged.
  • Verify the console's Bluetooth is enabled.
  • Try re-pairing the controller by following the wireless connection steps (Section 4.2.2).
  • Ensure no other wireless devices are causing interference.
  • If using wired connection, ensure the controllers are securely attached to the console.

7.2 Joystick Drift or Inaccuracy

  • Perform joystick calibration as described in Section 5.7.
  • Ensure no debris is lodged around the joystick base.

7.3 Buttons Not Responding

  • Check if the controller is properly connected.
  • Ensure the controller is charged.
  • If specific back buttons are not working, try clearing their settings (Section 5.2.4).
  • If the controller is in "Lock Mode", unlock it (Section 5.5.2).

7.4 Vibration Not Working

  • Check vibration settings in the game or console.
  • Adjust the motor vibration level (Section 5.3).

8. User Tips

  • Always fully charge your controller before extended gaming sessions for uninterrupted play.
  • Experiment with different Turbo speeds to find what works best for various games.
  • Utilize the back-button mapping feature to customize your controls for a competitive edge.
  • Keep your joysticks calibrated regularly, especially if you notice any slight drift, to maintain precision.

9. Warranty and Support

Please follow the instructions for use strictly. If you encounter any problems during use, you can contact us for consultation and solution.

Email: service@nyxigaming.com

We aim to respond to your inquiries within 24 hours.

For the full text of the EU Declaration of Compliance and UKCA Declaration of Compliance, please visit: www.nyxigaming.com

10. Safety Precautions

  • Do not expose the controller to liquid.
  • Do not disassemble the controller.
  • Avoid dropping the controller.
  • Avoid extremely high or low temperatures.

The symbol indicates that the product should not be disposed of with household waste but brought to an appropriate collection point for recycling. Dispose of the product or rechargeable battery according to local regulations to prevent negative impacts on the environment and human health.

11. Compliance Information

11.1 FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC ID: 2A88F-SJ01R

IC: 31067-SJ01L, 31067-SJ01R

11.2 CE and RoHS Compliance

The product conforms to EC standards for radio interference and RoHS directives. For full declaration details, please refer to the manufacturer's website.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.