SLMPLEFUN 2202RF EV15272A

Contents

SLMPLEFUN 433MHz 2-Channel RF Receiver Module and Remote Control Switch Instruction Manual

Brand: SLMPLEFUN | Model: 2202RF EV15272A

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your SLMPLEFUN 433MHz 2-Channel RF Receiver Module and Remote Control Switch. This versatile device is designed for various applications, including controlling garage door openers, AC/DC motors, lighting, and other electrical appliances. Please read this manual carefully before use to ensure proper functionality and safety.

2. Specifications

Technical Data Table

Figure 2.1: Technical Data Overview

Table 2.1: Detailed Technical Specifications
FeatureSpecification
Working VoltageAC 90V~250V or USB Type-C 5V-0.5A
Input/Output Voltage1V~250V Passive output
Output TypePassive output relay
Quiescent Current<5MA
Max Current10A
Max Load2200W
RF Frequency433MHz
Working Temperature-30 ~ +80℃
Receiving Sensitivity>-97dbm
Amount of Storage Remote ControlsUp to 20 pieces
Support Encoding1527 Learning code / 2262 fixed code
RF Operating ModeASK superheterodyne wireless reception
Receiving RangeOpen space is more than 50 meters
Remote Operating ModesMomentary Mode, Toggle Mode, Latched Mode, Mix Mode, Motor Toggle Mode
Channels2
Wireless CommunicationRF
Typical UsesUniversal, Speaker, Lighting, Electric Door, Automated curtains, Switch
Remote Control Size34*59*10 mm
Signal FeatureStable signal, can pass through walls

3. Product Overview

3.1 Receiver Module

Receiver Module Pinout Diagram

Figure 3.1: Receiver Module Pinout and Learning Button

The receiver module features two independent channels (CH1 and CH2) for controlling different devices. Each channel provides Normally Open (NO), Common (COM), and Normally Closed (NC) pins for flexible wiring. Power can be supplied via AC 90-250V or USB Type-C 5V-0.5A.

  • NO (Normally Open): The circuit is open by default and closes when activated.
  • COM (Common): The common terminal for the relay switch.
  • NC (Normally Closed): The circuit is closed by default and opens when activated.
Receiver Module Dimensions and Power Options

Figure 3.2: Receiver Module Dimensions and Power Options

3.2 Remote Control

The remote control operates at 433MHz and offers a control distance of up to 50 meters in open spaces. It is powered by a CR2032 3V lithium battery.

Remote Control Overview

Figure 3.3: Remote Control Overview

Remote Control Battery Type

Figure 3.4: Remote Control Battery (CR2032)

Remote Control Dimensions

Figure 3.5: Remote Control Dimensions

4. Installation and Setup

4.1 Power Supply

The receiver module supports two power supply methods: AC 90V-250V or USB Type-C 5V-0.5A. Choose the appropriate power source for your application.

Power Supply Methods for Receiver

Figure 4.1: Power Supply Options for the Receiver Module

4.2 Wiring Diagrams

Below are common wiring examples. Always ensure power is disconnected before wiring. If you are unsure, consult a qualified electrician.

Wiring Diagram for AC Device and DC Motor

Figure 4.2: Wiring for AC Devices (e.g., lights) and DC Motors

Description for Figure 4.2:

  • AC Device Control: Connect the AC 90-250V power supply to the L and N terminals of the receiver. Connect the AC device (e.g., a light) to the NO1 and COM1 terminals to control its power.
  • DC Motor Control: Power the receiver with AC 90-250V. Connect the DC motor to a separate DC 12V, 24V, or 36V power supply. Use the NO1 and COM1 terminals to switch the DC motor's power.
Wiring Diagram for AC Motor and DC Motor Directional Control

Figure 4.3: Wiring for AC Motor (Up/Down) and DC Motor (Forward/Reverse)

Description for Figure 4.3:

  • AC Motor Directional Control: Connect the AC motor to the AC 90-250V power supply. Use Channel 1 (NO1/COM1) for one direction (e.g., 'Up') and Channel 2 (NO2/COM2) for the other direction (e.g., 'Down').
  • DC Motor Directional Control: Connect the DC motor to its appropriate DC 12V, 24V, or 36V power supply. Use Channel 1 (NO1/COM1) for one direction (e.g., 'Forward') and Channel 2 (NO2/COM2) for the other direction (e.g., 'Reverse').

5. Operating Modes and Programming

The receiver module supports five different operating modes, allowing for flexible control of your devices. Signal pairing is required before use. Refer to the video below for a visual demonstration of programming each mode.

Video 5.1: Demonstration of Operating Modes and Programming

5.1 Programming Instructions

To program the receiver with your remote control, follow these steps for the desired operating mode:

  1. Momentary Mode (Press and Hold ON, Release OFF):
    • Operation: Press and hold remote button 'A', relay '1' turns ON. Release button 'A', relay '1' turns OFF. (Button 'B' controls relay '2' similarly).
    • Setup: Press the learning button on the receiver 1 time. Then, press remote button 'A' 1 time, and remote button 'B' 1 time. Successful pairing is indicated by the receiver's indicator light.
  2. Toggle Mode (Press ON, Press again OFF):
    • Operation: Press remote button 'A', relay '1' turns ON. Press button 'A' again, relay '1' turns OFF. (Button 'B' controls relay '2' similarly).
    • Setup: Press the learning button on the receiver 2 times. Then, press remote button 'A' 1 time, and remote button 'B' 1 time. Successful pairing is indicated by the receiver's indicator light.
  3. Latched Mode (Interlock - requires a remote with at least 3 buttons):
    • Operation: Press remote button 'A', relay '1' turns ON. Press remote button 'B', relay '2' turns ON, and relay '1' turns OFF. (If a 'C' button is available, pressing it can turn both relays OFF).
    • Setup: Press the learning button on the receiver 3 times. Then, press remote button 'A' 1 time, and remote button 'B' 1 time. Successful pairing is indicated by the receiver's indicator light.
  4. Mix Mode (Momentary + Toggle):
    • Operation: Press and hold remote button 'A', relay '1' turns ON; release button 'A', relay '1' turns OFF (Momentary). Press remote button 'B', relay '2' turns ON; press button 'B' again, relay '2' turns OFF (Toggle).
    • Setup: Press the learning button on the receiver 4 times. Then, press remote button 'A' 1 time, and remote button 'B' 1 time. Successful pairing is indicated by the receiver's indicator light.
  5. Motor Toggle Mode (Directional Control):
    • Operation: Press remote button 'A', relay '1' turns ON (e.g., motor moves in one direction). Press remote button 'B', relay '2' turns ON, and relay '1' turns OFF (e.g., motor moves in the opposite direction). Press button 'B' again, relay '2' turns OFF.
    • Setup: Press the learning button on the receiver 5 times. Then, press remote button 'A' 1 time, and remote button 'B' 1 time. Successful pairing is indicated by the receiver's indicator light.

5.2 Resetting the Receiver

To clear all paired remote controls from the receiver's memory:

  • Press the learning button on the receiver 8 times. All previously paired remotes will no longer control the receiver.

6. User Tips

  • Always perform a reset before attempting to change the operating mode of a remote control to avoid conflicts.
  • If you experience issues with remote control functionality after a reset, remember that all remotes must be re-paired with the receiver.
  • For Latched Mode, ensure your remote control has at least three buttons for full functionality.

7. Maintenance

  • Battery Replacement: Replace the CR2032 battery in the remote control promptly when its voltage is low to ensure strong signal transmission.
  • Antenna Adjustment: Slightly stretch the antenna on the receiver for optimal signal reception.

8. Troubleshooting

  • Remote Not Responding: Ensure the remote control is paired correctly. If you recently performed a reset, you must re-pair the remote. Check the remote's battery.
  • Limited Range: Ensure the receiver's antenna is extended. Obstacles like thick walls can reduce range.
  • Incorrect Mode Operation: If the device is not behaving as expected, perform a reset and re-program the desired operating mode carefully.

9. Certifications

This product complies with relevant international standards and holds the following certifications:

CE, FCC, RoHS Certifications

Figure 9.1: Product Certifications (CE, FCC, RoHS)

10. Support

For any questions or assistance, please contact our support team:

  • WhatsApp: +86 181 3880 5271 / +86 135 0227 8583
  • Email: dieseelectronic@163.com
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.