1. Important Safety Information
Please read this manual carefully before operating the device and keep it for future reference. Improper use may result in damage to the product or personal injury.
Information to User (FCC Rules)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
2. Product Overview
The Jennov 4K 8MP PTZ camera offers advanced surveillance features including 30X zoom, auto-tracking, PoE connectivity, and two-way audio, designed for outdoor use.

Product Details & Packing List

3. Installation & Setup
Camera Installation Guidelines (For tracking cameras only)
- Please refer to the schematic diagram to adjust the appropriate installation angle.
- When multiple targets appear at the same time, the camera will preferentially track the relatively large target.
- The camera is suitable for border defense, reservoirs, forests, farms, and other low-density scenes, which can give full play to the advantages of the product. It is not suitable for tracking in large flow of people, such as stations and squares.
NOTE: If the target distance is less than 3m or more than 50m, the tracking effect will be affected.

Connection Methods
Single Camera Connection (Compatible with Onvif Protocol)

POE NVR Connection
This camera is compatible with 8MP POE NVRs that support Onvif protocol, including Hikvision POE NVR (Plug&Play) and Dahua POE NVR (Plug&Play).

Software Download & Initial Setup
Download the necessary software from the Jennov website: www.jennov.com. Navigate to "Support" → "Download File" → "M-Series".
For mobile access, search for "VideoLink" in Google Play or App Store, or scan the QR code provided in the manual.
Check IP Address Before Connection (Using VideoLink Software)
- Power on the camera and plug in the network cable.
- Run the "VideoLink" software to search for the camera IP address.
- Click "Start Search" to find the camera IP address.
- Choose the camera's IP and click "Batch Modify IP".
- Select "DHCP".
- Click "OK".
Note: Ensure the camera and your router are in the same network segment.
To reset the camera, select your device in VideoLink and click "Restore".
Adding Camera to VideoLink (PC Software)
- Click "Devices" → "Start Search".
- Select the desired device and click "Add".
Note: Ensure the camera and your router are in the same network segment.
Adding Camera to VideoLink (Mobile App)
- Register for a VideoLink personal account.
- Click on "Add New device" in the middle of the app interface.
- Select "Lan" to scan the QR code on the camera.
4. Operation
Live View & Menu Access (LMS Software)
Click "LiveView" and then double-click the IP address to view the camera feed. Right-click with your mouse to access the menu functions such as Stream, PlayMode, Stop LiveView, Record LiveView, All Record Liveview, Audio, Intercom, Remote Configuration, and Synchronizing time.
Human Tracking Settings (LMS Software)
- Select the camera you want to set up.
- Enter command 92 at the preset option and click the arrow to save the settings.
- To turn off tracking, enter command 94 again.
NOTE: Only P87 models support this feature.
PTZ Control & Interface (Mobile App)
The mobile app interface allows for PTZ (Pan-Tilt-Zoom) control, flip screen, screenshot, record to mobile album, audio, resolution switch, zoom in & zoom out, microphone, split screen, and adaptive screen.
Human Tracking Settings (Mobile App)
- Click "Advanced Configuration".
- Click "Start Tracking" to activate.
- Click "Stop Tracking" to turn off.
NOTE: Only P87 models support this feature.
Please note that the operation interface of the APP may be different for different models.
Key Features in Action


5. Specifications
| Attribute | Value |
|---|---|
| Brand Name | JENNOV |
| JENNOV Model | P87HM85-30X-EAS |
| Style | PT Camera |
| High Definition | 8.0 Megapixels |
| Megapixels | 8MP |
| Maximum Resolution | 3840x2160 |
| Lens (mm) | 4.7-94mm |
| Optical Zoom | 20X |
| Digital Zoom | 10X |
| Connectivity | WIFI |
| Power Mode | Mains Electricity |
| Power Source | Wall Plug-In |
| Video Compression Format | H.264, H.265 |
| AI Functions | Smart Tracking |
| Color Night Vision | Yes |
| Color Mode | Color Day, B&W Night |
| Operating Range | 50 m |
| Operating Temperature | -10°C to 60°C |
| IP Rating | IP66 |
| Shell Material | Metal |
| Scene | Indoor and outdoor |
| Installation | Wall Mounted |
| Special Features | Waterproof / Weatherproof |
| Supported Operating Systems | Windows 7, Mac OS, Windows 10 |
| Smart Home Platform | Alexa, Google Assistant |
| Certification | CE |
6. Troubleshooting (FAQs)
Q: Where can I find the reset button?
A: 1. The latest versions of the P87 camera are equipped with a reset button on the tail cord.
2. The A76 camera is not equipped with a reset button.
3. If your camera does not have an external reset button, you can reset the camera in the following ways:
- VideoLink: Click "Config" - Factory Reset
- LMS: Right-click IP address - Restore
- AjDevTools: Click Start Search - Tick the camera IP address - Click Batch Reset
Q: Are all the functions in the IVS interface supported?
A: In the IVS interface, only human detection is supported (only some dome PTZ cameras support human detection function). If you're not sure, please feel free to consult our customer service team.
Q: Why is my camera showing offline on the LMS?
A: Please download "AjDevTools" from our official website (www.jennov.com). (Support--Download--M-series). Then, "Start search" → "Batch Reset" → Right-click on your device and select "Login".
Q: How to connect it to my NVR?
A: (Please be sure to modify the IP address of the camera before connecting the camera.)
- Download the "AjDevTools" from our official website.
- Run the software to search the camera IP address. (If the camera IP address does not appear, please check whether the computer and the camera are in the same network segment.)
- Select IP and click "IP Batch Settings" to modify manually, so that the camera and NVR are in the same network segment.
- Search camera IP through NVR and add it.
User name: admin
Password: 123456
P.S. Whether the functions of the camera are available depends on the NVR.
Q: How to add if NVR is Dual IP?
A: 1. Connect the Dual IP NVR to the monitor to check the camera IP address of the NVR port.
2. Download the M-series software "AjDevTools".
3. Connect the camera to your router and run the software on the computer to manually modify the IP address. If the IP address segment of the camera on the NVR port is 172.0.0.X, you need to manually modify the IP address of the camera to 172.0.0.X.
Note: Do not conflict with the IP of other devices on the LAN.
4. Enter NVR search and add.
Troubleshooting:
1. Camera IP cannot be searched after connection:
A: Make sure your NVR is a national standard POE NVR. This camera only supports national standard POE power supply or DC 12V2A power supply. When the camera is normally powered on, it will automatically rotate as a self-check. If there is no rotation self-check, it means that the camera is not powered on.
B: Make sure that the camera and NVR are in the same network segment, otherwise the camera IP cannot be searched. The modification method is as above.
2. The camera IP is searched and connected successfully, but cannot be viewed:
A: Check whether the protocol in NVR is Onvif. If not, change it to Onvif.
B: The user name and password are incorrect. (Username: admin, Default password: 123456)
C: IP conflict with other camera in use.
7. User Tips
- The Jennov 4K camera is indeed wireless (WIFI connectivity) and features both optical (20X) and digital (10X) zoom, totaling 30X zoom.
- For optimal auto-tracking performance, ensure the camera is installed where the target distance is between 3m and 50m.
- Always ensure your camera and router are on the same network segment for successful connection and setup.
- When connecting to an NVR, verify that the NVR supports the Onvif protocol and that the camera's IP address is manually configured to be in the same network segment as the NVR.
8. Warranty & Support
Warranty Tips
To activate your free 12-month warranty, fill in the following information or scan the QR code provided in the original manual. After completion, take a picture and send it to support@jennov.com. The warranty takes effect from the order date.
During the warranty period, if any parts of the product are damaged, please contact Jennov immediately for a satisfactory resolution.
Contact Us
- Website: www.jennov.com (24 hours online service)
- Email: support@jennov.com
- U.S Hotline: +1 3239021978
For a detailed user manual in PDF format, you can view it here.