1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Fccemc DRL LED Daytime Running Light Strip. This product is designed to enhance vehicle visibility and safety by providing bright daytime running lights and synchronized turn signals.

Figure 1: Fccemc DRL LED Daytime Running Light Strip in operation.
2. Safety Warnings
- Voltage Compatibility: This product is designed for 12V DC vehicles only. Do not use it on 24V vehicles or with household AC power to prevent damage and ensure safety.
- Power Disconnection: Always disconnect the vehicle's power supply before beginning installation to avoid short circuits or blowing fuses.
- Wiring Accuracy: Ensure all wiring connections are correct (polarity, signal lines) to prevent product malfunction, flickering, or damage. Incorrect wiring can lead to product failure or burnout.
- Installation Location: Do not install the light strips in a position that obstructs the vehicle's original headlights, brake lights, or other essential lighting, as this could impair driving safety.
- Environmental Conditions: Keep the product away from high temperatures, excessive humidity, and sharp objects to prevent damage to the light strip.
- Professional Installation: If you are unfamiliar with car electrical wiring, it is highly recommended to seek installation assistance from a qualified professional mechanic.
3. Package Contents
Your package should contain the following items:
- 2 x Fccemc DRL LED Daytime Running Light Strips (selected LED count/length)
4. Specifications
| Feature | Description |
|---|---|
| Product Name | Car Daytime Running Light |
| Model | DRL LED Daytime Running Light Strip |
| Voltage | 12 V DC |
| Item Type | Day Light |
| Light Color | White (DRL) to Yellow (Turn Signal) |
| Features | Flexible, Waterproof, Synchronized Turn Signal |
| Package | 2 pieces per order |
| Available Sizes (LED Count / Length) | 8 LED (24.5cm), 10 LED (31.5cm), 12 LED (38.3cm), 14 LED (43.5cm), 16 LED (50cm) |

Figure 2: Available sizes of the DRL LED strips.
5. Setup and Installation
Please read all instructions carefully before beginning installation.
5.1 Wiring Instructions (Core Step)
Always turn off the car's power before wiring to avoid short circuits or electrical hazards.
- Red Wire: Connect to the positive pole (+) of the car's power supply. Common connection points include the car headlight positive pole or the cigarette lighter positive pole.
- Black Wire: Connect to the negative pole (-) of the car's power supply. Common connection points include any metal part of the car body (ground) or the battery negative pole.
- Yellow Wire: Connect to the positive pole (+) of the car's turn signal power supply. Connect this wire to the wire of the original car turn signal to achieve synchronized flashing of the light strip with your vehicle's turn signals.

Figure 3: Connection Diagram for the DRL LED strips.
5.2 Installation Steps
- Prepare the Surface: Clean the intended installation position on your vehicle thoroughly with a dry cloth. Ensure the surface is free from dust, oil, water stains, or any other contaminants for optimal adhesion.
- Apply the Light Strip: Carefully peel off the protective film from the adhesive tape on the back of the light guide strip. Position the strip accurately on the cleaned surface and press it firmly for 3-5 minutes to ensure a strong and secure bond.
- Connect Wires: Following the wiring instructions in Section 5.1, connect the three wires (Red, Black, Yellow) to their respective points in your car's electrical system. After making the connections, use electrical tape to securely wrap each connection point to prevent poor contact, short circuits, and protect against moisture.
- Test Functionality: Once all connections are made and secured, turn on your car's power. Test the normal lighting (white DRL) and turn signal (yellow streamer) functions. If the light does not illuminate, flickers abnormally, or does not synchronize, re-check all wiring connections, paying particular attention to the yellow wire and its connection to the turn signal circuit.

Figure 4: Visual comparison before and after DRL installation.
6. Operating Instructions
Once properly installed and wired, the Fccemc DRL LED Daytime Running Light Strip operates automatically with your vehicle's electrical system:
- Daytime Running Light (DRL) Function: When your vehicle's ignition is on (and depending on how the red wire is connected to accessory power), the LED strips will illuminate in a bright white color, serving as DRLs to enhance your vehicle's visibility during the day and night.
- Turn Signal Function: When you activate your vehicle's turn signal, the corresponding LED strip will switch from white to a dynamic yellow streamer light, synchronizing with your vehicle's original turn signal to clearly indicate your turning intentions.
Video 1: Demonstration of DRL (white) and synchronized streamer turn signal (yellow) functionality.
7. Maintenance
- Cleaning: Periodically clean the surface of the LED strips with a soft, damp cloth to remove dirt and debris. Avoid using abrasive cleaners or solvents that could damage the strip's material or LEDs.
- Inspection: Regularly inspect the light strips for any signs of damage, such as cracks, loose connections, or peeling adhesive. Address any issues promptly to maintain performance and safety.
- Wiring Check: If you notice any issues with the lights, check the wiring connections to ensure they remain secure and free from corrosion.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light strip is not working | Incorrect wiring, loose connection, blown fuse, insufficient power. | Check all wiring connections for proper polarity and secure contact. Verify the vehicle's fuse for the connected circuit. Ensure the power source is active. |
| Light strip is flickering | Loose connection, unstable power supply, incorrect polarity. | Secure all wiring connections. Check the vehicle's electrical system for stable voltage. Confirm correct polarity. |
| Turn signal does not synchronize | Yellow wire not connected correctly or to the wrong signal wire. | Verify the yellow wire is securely connected to the positive wire of the vehicle's original turn signal. |
9. User Tips
- Pre-test Before Final Mounting: Before permanently adhering the strips, temporarily connect them to power to ensure they function correctly and meet your expectations.
- Secure Wiring: Use zip ties or additional electrical tape to neatly secure any excess wiring and prevent it from dangling or interfering with other vehicle components.
- Consider Professional Help: If you are not confident in your electrical skills, it's always best to have a professional install these lights to avoid potential damage to your vehicle or the product.
10. Warranty and Support
For any warranty claims or technical support, please refer to your purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty-related inquiries.