1. Introduction
Thank you for purchasing the DAMIASMIL Modern Simple Ring Round LED Wall Lamp. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
2. Safety Information
- Always turn off the power supply at the main circuit breaker before beginning any electrical work.
- Installation should be performed by a qualified electrician or a knowledgeable professional to ensure safety and compliance with local electrical codes.
- Do not connect the lamp to a power source other than specified in the specifications.
- Avoid touching the lamp with wet hands.
- Keep the lamp away from flammable materials.
- Ensure all connections are secure and properly insulated.
3. Package Contents
Please check that all components are present and undamaged:
- LED Wall Lamp (main unit)
- Mounting Hardware (screws, expansion screws, hanging plate, nuts)
- User Manual (this document)
- Remote Control (if 'Stepless dimming(RC)' model is purchased)
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | DAMIASMIL |
| Model Number | LWL039 |
| Item Type | Wall Lamps |
| Installation Type | Wall Mounted |
| Body Material | Aluminum |
| Shade Type | Acrylic |
| Shade Direction | Up & Down |
| Light Source | LED bulbs |
| Is Bulbs Included | Yes |
| Power Source | AC |
| Voltage | 90 - 260 V (compatible with 110 V, 220 V) |
| Luminous Flux | 249-2000 lumens |
| Lighting Area | 3-5 square meters (varies by size) |
| Is Dimmable | No (unless 'Stepless dimming(RC)' model) |
| Switch Type | Remote Control, Touch On/Off Switch |
| Features | Ceiling light wall light |
| Application | Kitchen, Dining Room, Bed Room, Foyer, Study, Bathroom |
| Warranty | 2 years |
| Certification | CCC, CE, FCC, UL |
Dimensions and Power Output:
| Style | Size | Power | Recommended Area |
|---|---|---|---|
| TypeA/B | D30cm | 7W | 3-8m² |
| TypeA/B | D50cm | 12W | 5-10m² |
| TypeA/B | D60cm | 15W | 8-12m² |
| TypeA/B | D80cm | 20W | 10-15m² |
| TypeA/B | D100cm | 25W | 12-18m² |
| TypeA/B | D120cm | 30W | 15-20m² |
Note: 'TypeA' and 'TypeB' refer to different aesthetic designs, while dimensions and power remain consistent for corresponding sizes.

5. Installation
Important: Ensure the power is turned off at the circuit breaker before installation. If you are unsure about any steps, please consult a qualified electrician.
- Marking: Draw a hole in the ceiling with a pencil at the desired installation point.
- Drilling: Drill a hole at the marked spot using a drill.
- Insert Expansion Screw: With a hammer, insert the expansion screw into the hole.
- Secure Hanging Plate: Use 2 screws to secure the hanging plate to the wall.
- Tighten Screws: Tighten the screws on the suspension plate.
- Wall Screws: Tighten with a screwdriver, ensuring wall screws are secure.
- Connect Cables: After turning off the power, connect the cable securely. The lamp supports free wire connection and USB control (available with charging bank, computer, and other USB connections).
- Install Light Board Assembly: Install the light board assembly and tighten the lamp cap and assembly.
- Secure Suction Cup: Tighten the nut and secure the suction cup to the wall.
Instruction Tools:
- Drill
- Gloves
- Pencil
- Hammer
- Screwdriver
- Cleaning Cloth
Tip: Different lighting installation details may vary, but the process is generally the same. Please consider professional installation if needed. If you encounter any problems during installation, please contact customer support.


6. Operation
Your LED Wall Lamp offers various lighting options depending on the model purchased:
- On/Off: Use the wall switch or the touch switch on the lamp to turn the light on or off.
- Color Temperature: The lamp supports different light colors for various situations. Available options include:
- Warm White (no RC)
- Cool White (no RC)
- Nature White (no RC)
- Tricolor (no RC)
- Stepless dimming (RC)
- Dimming (for 'Stepless dimming(RC)' models): If your model includes a remote control, you can adjust the brightness from bright to dark and change the color temperature from warm white to cool white.
- USB Control: The lamp supports USB control, allowing it to be powered or controlled via a charging bank, computer, or other USB connections.


7. Maintenance
- Cleaning: To clean the lamp, ensure the power is off. Use a soft, dry cloth to wipe the surface. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Bulb Replacement: The lamp uses integrated LED bulbs, which are not user-replaceable. If the LEDs fail, the entire fixture may need to be replaced.
- Inspection: Periodically check the wiring and mounting for any signs of wear or looseness.
8. Troubleshooting
- Light not turning on:
- Check if the power supply is connected and turned on at the circuit breaker.
- Ensure the wall switch or touch switch is in the 'On' position.
- Verify that all wiring connections are secure.
- Dimming/Color Temperature not working (for RC models):
- Check the remote control battery.
- Ensure the remote control is within range and pointed towards the lamp.
- Confirm that your specific lamp model supports dimming and color temperature adjustment.
- Cable Connection: The lamp is designed for direct cable connection (free wire connection) to your home's electrical system.
- DALI Control: This product does not specify compatibility with DALI control systems. If DALI control is required, please verify compatibility before purchase.
9. User Tips
- Many users appreciate the aesthetic appeal and quality of these lamps.
- For optimal performance and longevity, ensure proper installation and avoid exposing the lamp to excessive moisture.
- If you have any questions or concerns, contacting customer support is recommended.
10. Warranty and Support
This product comes with a 2-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
For technical support, warranty claims, or any other inquiries, please contact the seller or manufacturer through your purchase platform.