Projection Alarm Clock D2363

Contents

Projection Alarm Clock D2363 Instruction Manual

Model: D2363

1. Introduction

Thank you for purchasing the Projection Alarm Clock D2363. This intelligent multifunction clock features a 4-digit LED display, time projection, and various useful functions designed to enhance your daily routine. Please read this manual carefully to ensure proper use and to fully enjoy all the features of your new alarm clock.

Key Features:

  • 4-Digit LED Display: Clear display of hours and minutes.
  • Time Function: Displays hours and minutes, with support for 12/24-hour system conversion.
  • Date Function: Displays month, day, and year (from 2000 to 2099).
  • Alarm & Snooze: Set daily alarms with a customizable snooze function.
  • Temperature Function: Displays ambient temperature in Fahrenheit or Celsius, with a normal measurement range of -10°C to 50°C (14°F to 122°F).
  • Display Mode Selection: Easily switch between time, date, and temperature display modes.
  • Brightness Control: Adjustable display brightness (High, Medium, Low, OFF) and automatic half-brightness function (dims from 18:00 to 5:59).
  • LCD Projection Clock: Projects time onto a wall or ceiling, with adjustable brightness (High, Low, OFF) and manual adjustment for projection direction (backward, forward, up ceiling).
  • Key Tones: Audible feedback for button presses.

2. Safety Guidelines

  • Ensure the clock is placed on a stable, flat surface to prevent falling.
  • Keep the device away from water or excessive moisture.
  • Do not expose the device to extreme temperatures (hot or cold) or direct sunlight for prolonged periods.
  • Avoid dropping or subjecting the device to strong impacts.
  • Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.
  • Use only a compatible 5V 1A or 5V 2A USB power adapter (not included) to power the device.

3. Package Contents

Please check the package for the following items:

  • 1 x Projection Alarm Clock D2363
  • 1 x USB Power Cable (adapter not included)
  • 1 x Instruction Manual (this document)

4. Initial Setup

Power Connection:

  1. Connect the provided USB power cable to the Power Port on the back of the alarm clock.
  2. Plug the other end of the USB cable into a 5V 1A or 5V 2A USB power adapter (not included) and then into a wall outlet.
  3. Upon successful power-on, the LED display will show a full display for approximately 2 seconds, followed by a

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.