CETANT PL230

Contents

CETANT Modern LED Pendant Light

Model: PL230

Brand: CETANT

1. Introduction

Thank you for choosing the CETANT Modern LED Pendant Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and keep it for future reference.

Modern black LED pendant light installed in a dining room with warm lighting.

Figure 1: Black LED Pendant Light in a dining setting.

2. Safety Information

WARNING: Risk of electric shock. Disconnect power before installation or servicing.

  • Always turn off the main power supply at the circuit breaker before beginning any electrical work.
  • Installation should be performed by a qualified electrician or under the guidance of a professional.
  • Ensure the mounting surface can support the weight of the fixture.
  • Do not connect the fixture to an ungrounded electrical system.
  • Do not attempt to modify the fixture in any way.
  • Keep flammable materials away from the light fixture.
  • This fixture is not designed for use with dimmers.

3. Package Contents

Carefully unpack your pendant light and check for the following components:

  • LED Pendant Light Fixture
  • Ceiling Plate / Canopy
  • Fixed Sheets
  • Expansion Rubber Plugs
  • Countersunk Bolts
  • Tapping Screws
  • Nuts
  • Washers
  • Adapter
  • Grounding Wire Port
  • Fixed Cable Components
  • Cable
  • Instruction Manual (this document)

If any parts are missing or damaged, please contact customer support.

4. Specifications

Table showing product specifications including color, material, lighting area, wattage, and size for 50cm and 60cm black and white variants.

Figure 2: Product dimensions and specifications table.

General Specifications
Feature Detail
Model NumberPL230
Brand NameCETANT
MaterialAluminum / Iron / Silica gel
Voltage90 - 260 V AC
Light SourceIntegrated LED bulbs (not replaceable)
Luminous Flux2000-82000 (range across variants)
Number of Light Sources> 20 (integrated LEDs)
Installation TypeCord Pendant, Self-Contained
Base TypeWedge
Is DimmableNo
Is Smart DeviceNo
TechnicsPerforated
StyleModern Style
OriginMainland China
CertificationsCCC, CE, PSE, ROHS
Recommended PlaceParlor, Study, Master Bedroom, Other Bedrooms, Hotel Hall, Hotel Room
Variant Specifics (Approximate)
Color Size (D*H) Wattage Lighting Area
BlackD50cm*H11cm48W8-12m²
BlackD60cm*H11cm58W12-16m²
WhiteD50cm*H11cm48W8-12m²
WhiteD60cm*H11cm58W12-16m²

Package Dimensions: Length: 62 cm, Width: 58 cm, Height: 13 cm

Package Weight: 1.83 kg

5. Setup and Installation

Before starting, ensure the power is OFF at the circuit breaker. It is recommended to have a professional electrician perform the installation.

Required Tools:

  • Drill
  • Gloves
  • Pencil
  • Hammer
  • Screwdriver and screws expansion
  • Professional cleaning cloth

Installation Steps:

A multi-panel diagram illustrating the steps for installing the pendant light, including marking, drilling, inserting plugs, securing the fixed sheets, connecting wires, and securing the ceiling plate. It also labels components and lists required tools.

Figure 3: Installation Diagram and Component Labels.

  1. Marking Points: Draw two points on the ceiling through the holes of the fixed sheets using a pencil.
  2. Drilling Holes: Use an electric drill to make two holes at the marked points.
  3. Inserting Plugs: Use a hammer to insert the expansion rubber plugs into the two drilled holes.
  4. Securing Fixed Sheets: Tighten the tapping screw to secure the fixed sheets to the ceiling.
  5. Wiring Connection: Use an adapter to connect the wires from the ceiling to the wires of the light fixture. Ensure proper grounding (Grounding Wire Port).
  6. Securing Ceiling Plate: Tighten the countersunk bolt to secure the ceiling plate to the fixed sheets on the ceiling.

Component Labels (Refer to Figure 3):

  • ① Expansion Rubber Plug
  • ② Fixed Sheets
  • ③ Nut
  • ④ Grounding Wire Port
  • ⑤ Ceiling Plate
  • ⑥ Cable
  • ⑦ Countersunk Bolt
  • ⑧ Tapping Screw
  • ⑨ Washers
  • ⑩ Adapter
  • ⑪ Fixed Cable Components

Important Note: Different lights may have slight variations in installation, but the general principle remains the same. Always follow local electrical codes.

6. Operating Instructions

Once properly installed and connected to the power supply, operate the pendant light using a standard wall switch. This fixture is not dimmable, so it will operate at full brightness when switched on.

  • To Turn On: Flip the wall switch to the 'ON' position.
  • To Turn Off: Flip the wall switch to the 'OFF' position.

7. Maintenance

To ensure the longevity and appearance of your pendant light, follow these maintenance guidelines:

  • Cleaning: Always turn off the power and allow the fixture to cool before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
  • LEDs: The LED light source is integrated and not user-replaceable. If the LEDs fail, the entire fixture may need to be replaced.
  • Inspection: Periodically check the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified electrician.

8. Troubleshooting

If you encounter issues with your pendant light, refer to the following common problems and solutions:

Problem Possible Cause Solution
Light does not turn on.
  • No power to the fixture.
  • Loose wiring connection.
  • Faulty wall switch.
  • Check the circuit breaker and ensure power is restored.
  • Verify all wire connections are secure (ensure power is off first).
  • Test the wall switch with another device or consult an electrician.
Light flickers.
  • Loose wiring.
  • Incompatible dimmer switch (if mistakenly used).
  • Check all wiring connections (power off).
  • Ensure no dimmer switch is being used, as this fixture is not dimmable.
Fixture is humming.
  • Loose components.
  • Electrical interference.
  • Ensure all screws and mounting hardware are tight.
  • Consult an electrician to check for electrical interference.

If the problem persists after trying these solutions, please contact customer support or a qualified electrician.

9. User Tips

  • Adjustable Cable Length: The pendant light features an adjustable cable. During installation, you can customize the hanging height to best suit your space and aesthetic preferences. Plan your desired height before finalizing the installation.
  • Placement: Consider the lighting area specifications (e.g., 8-12m² for 48W, 12-16m² for 58W) when choosing the appropriate size and wattage for your room to ensure adequate illumination.
  • Aesthetic Integration: The modern design of this pendant light makes it a focal point. Consider its placement relative to furniture and other decor to enhance your room's overall look.

10. Warranty and Support

This CETANT LED Pendant Light comes with a 2-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

For technical support, warranty claims, or any questions not covered in this manual, please contact your retailer or the manufacturer's customer service.

An additional user manual in PDF format may be available for download. Please refer to the product page or contact customer support for the link: View User Manual (PDF)

11. Product Disposal

This product contains electronic components and should not be disposed of with household waste. Please dispose of it according to local regulations for electronic waste recycling. Proper disposal helps prevent potential negative consequences for the environment and human health.

© 2023 CETANT. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.