1. Introduction
This manual provides detailed instructions for the safe and proper installation and use of your BEISHI Universal TV Wall Mount Bracket. This bracket is designed to securely mount LCD and LED monitors ranging from 26 to 65 inches to a wall, offering a low-profile, fixed position solution.
2. Safety Information
Important Notes:
- The product is only suitable for physical load-bearing walls. Special walls, such as hollow walls and foam walls, can be installed only when they are load-bearing.
- It is recommended that professional installers perform the installation according to these instructions. If there are any installation problems, contact the seller or ask for professional help.
- For safety reasons, the mounting surface must be able to support the combined weight of the mount and the display. Otherwise, the structure must be strengthened.
- Ensure that the mount is installed on the wall without cable joints, water pipes, or natural gas pipelines behind the mounting area.
- The installation environment must be reasonable; improper installation may cause property damage and personnel injury.
3. Package Contents
Please verify that all components are present before beginning installation. Due to variations in TV models and hole distances, some screws may not be universally compatible. If the provided screws are not suitable, please obtain appropriate screws from a hardware store.
| Item | Description | Quantity |
|---|---|---|
| (A) | Expansion bolts | 4 |
| (B) | Expansion tube | 4 |
| (C) | Heightening pad | 4 |
| (D) | M4x20 screws | 4 |
| (E) | M6x20 screws | 4 |
| (F) | M8x45 screws | 2 |
| (G) | D6 gasket | 8 |
| (H) | Level | 1 |
| (I) | Hook | 2 |
| (J) | Panel | 1 |
4. Specifications
- Screen Size Compatibility: 26-65 inches
- Maximum Load Weight: 50 kg (110 lbs)
- Distance to Wall: 18 mm
- Adjustable Size: Yes (accommodates various TV sizes)
- Adjustment Type: Fixed (no tilt, swivel, or articulation after installation)
- Installation Type: Wall Mounting
- Standard VESA Compatibility: 100x100mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x300mm, 400x400mm
- Material: Steel
- Dimensions (Approximate):
- Width: 455 mm
- Height: 425 mm
- Vertical Bracket Length: 187 mm
- Horizontal Bracket Width: 25 mm
5. Setup and Installation
Follow these steps carefully for a secure installation.
Overview of Installation Steps
Detailed Installation Instructions
Step 1a: Fixing the bracket to a solid concrete wall
- Position the (J) Panel on the desired wall location. Use the (H) Level to ensure it is perfectly horizontal.
- Mark the drill holes using a pencil.
- Use an impact drill to create holes at the marked positions.
- Insert (B) Expansion tubes into the drilled holes.
- Align the (J) Panel with the holes and secure it using (A) Expansion bolts and (G) D6 gaskets.
Step 1b: Fixing the bracket to a wooden wall
- Position the (J) Panel on the desired wooden wall location. Use the (H) Level to ensure it is perfectly horizontal.
- Mark the screw positions with a pencil.
- No expansion tubes are required for wooden walls. Directly fix the (J) Panel to the wall using a screwdriver and appropriate screws (e.g., M8x45 screws (F)).
Step 2: Fix the hook on the TV
- Attach the (I) Hooks to the back of your TV using the appropriate (D) M4x20, (E) M6x20, or (F) M8x45 screws and (G) D6 gaskets.
- If needed, install the (C) Heightening pads between the hook and the TV (as shown in Figure A in the diagram) or above the hook (as shown in Figure B) to ensure proper fit and spacing.
Step 3: Hang the TV on the wall
- Carefully lift the TV and hang the (I) Hooks onto the (J) Panel installed on the wall.
- Once the TV is securely hanging, tighten the safety screws (F) to prevent accidental dislodgement.
Ensuring Horizontal Alignment
The wall mount includes an adsorption level meter for easy horizontal installation. This level gauge is integrated into the packaging and needs to be installed on the bracket for use during the wall plate installation to ensure perfect alignment.
6. Operating Instructions
Once installed, this is a fixed TV wall mount. Ensure your TV is securely seated on the wall plate and the safety screws are tightened. No further adjustments (like tilt or swivel) are possible with this model. Always ensure the TV is level during initial installation using the provided level meter.
7. Maintenance
- Periodically check all screws and bolts to ensure they remain tight and secure.
- Clean the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Ensure no cables are pinched or stressed by the mount or TV.
8. Troubleshooting
- TV is not level after installation: Re-check the wall plate installation using the level meter. If necessary, slightly loosen the safety screws, adjust the TV, and re-tighten.
- Screws do not fit my TV: The provided screws are standard. If they do not fit your specific TV model, you may need to purchase compatible screws from a local hardware store.
- Mount feels unstable: Immediately remove the TV. Re-evaluate the wall type and installation method. Ensure the wall can support the weight and all fasteners are correctly installed and tightened. Consult a professional if unsure.
9. User Tips
- Users generally find this mount to be affordable and offer good value for money.
- The integrated level meter is a helpful feature for ensuring a straight installation.
10. Frequently Asked Questions (FAQ)
- Q: Does this mount work for a 65-inch TV?
- A: Yes, this TV wall mount is suitable for TVs ranging from 26 to 65 inches, provided the TV's VESA pattern and weight are within the specified limits.
11. Warranty and Support
For any questions, concerns, or support needs regarding your BEISHI Universal TV Wall Mount Bracket, please contact the seller or retailer from whom you purchased the product. Please refer to your purchase documentation for specific warranty terms and contact information.
A PDF version of this user manual is available for download: Download User Manual (PDF)